Cross-contamination in single-chamber processes for thin-film silicon solar cells

Abstract Boron (B) and phosphorus (P) cross-contamination for single-chamber deposited a-Si:H, μc-Si:H, and a-Si:H/μc-Si:H tandem solar cells has been investigated by studying their impact on the different layers of solar cells. To reduce the B and P cross-contamination into the i-layer and p-layer, respectively, to a tolerable level, for a-Si:H and μc-Si:H cells a 15' evacuation cycle prior to the i-layer deposition is applied. The effect of P cross-contamination into the i-layer is strongly reduced by the p-layer deposition and a 15’ evacuation cycle prior to the i-layer deposition. The p-layer is assumed to cover up or to fix (in form of P-B complexes) most of the P at the chamber walls. This leads to high quality μc-Si:H cells and a-Si:H cells with only slightly reduced performance. Here, a soft-start of the a-Si:H i-layer led to high quality cells, presumably due to reduced P recycling. Further, there is no need to clean the process chamber with, e.g. NF3, after each p-layer, as applied in many industrial processes. Instead, many cells are deposited without cleaning the process chamber. We established a single-chamber tandem cell process with 15' evacuation cycles prior to the μc-Si:H p-layer and to each i-layer with a cell efficiency of ~ 11.1%.