Investigating oxidation behavior of Fe38Co38Mo8B15Cu1 alloy ribbons – structural, magnetic and Mössbauer study
Source abstract
Abstract
This study addresses the oxidation behavior of Fe38Co38Mo8B15Cu1 alloy. Amorphous, melt-spun ribbons were heat treated in an oxygen atmosphere for different times at 350 °C, 550 °C, and 800 °C. We focus on the change in structural, thermal, and magnetic properties induced by oxygen treatment. The low-temperature heat-treated samples displayed broad, continuous, and low-intensity X-ray diffraction peaks. While no structural change was observed in the heat treatments at 350 °C both 30 min and 480 min, a significant oxide formation was observed in the heat treatment at 800 °C for 480 min. DTA/TG analysis demonstrates the weight gains and oxide formation with the temperature and time of heat treatment increase. The weight gain occurs rapidly for the sample treated for 480 min at 800 °C. A remarkable change in magnetic properties was observed. Bulk oxidation is seen by Mössbauer analysis in the heat treatment of alloy in air at 800 °C. Besides hematite, a defective CoFe2O4 phase emerged after 30 min, while after 480 min this phase was well-crystallized CoFe2O4.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metallic Glasses and Amorphous Alloys · Magnetic Properties of Alloys · Magnetic Properties and Synthesis of Ferrites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (40)
Show source-provided references
1. Study of structure evolution of ultra-rapidly annealed Fe75.3Ni10B14Cu0.7 alloys
2. Thermal, magnetic and mechanical behavior of large-sized Fe-based amorphous alloy ribbons by twin-roll strip casting
3. Evolution of structural and magnetic properties of the FeCuBP amorphous alloy during annealing10.1016/j.jallcom.2017.06.147 ↗
4. Surface and structural characterization of amorphous Fe,Co-based melt-spun ribbons subjected to heat treatment processes10.1016/j.jnoncrysol.2019.119592 ↗
5. Nanocrystallization in Co67Cr7Fe4Si8B14 Amorphous Alloy Ribbons
6. Correlation between microstructure and magnetic properties of amorphous and nanocrystalline Fe73.5Cu1Nb3Si16.5B610.1016/S0921-5093(97)80074-3 ↗
7. The effect of stress-annealing on the mechanical and magnetic properties of several Fe-based metal-amorphous nano-composite soft magnetic alloys10.1016/j.jnoncrysol.2022.122037 ↗
8. Effect of low magnetic field heat treatment process on grain sizes and soft magnetic properties of Finemet cores
9. Improvement of soft magnetic properties of a Nanoperm-type Fe-Hf-B nanocrystalline alloy upon surface crystallization inhibition by Cu addition
10. Soft magnetic performance of ultra-rapidly annealed high-Bs Fe-(Co)-B nanocrystalline alloys at elevated temperatures10.1016/j.jallcom.2022.165033 ↗
11. Magnetic structural analysis of nanocrystalline soft magnets by small-angle neutron scattering10.1109/LMAG.2023.3242108 ↗
12. Nitrogen-induced optimization of corrosion resistance for nanocrystalline soft magnetic Fe-Zr-B alloys
13. M. Hasiak, J. Świerczek, Some thermomagnetic and mechanical properties of amorphous Fe75Zr4Ti3Cu1B17 Ribbons, 15 (2022) 368.10.3390/ma15010368 ↗
14. Microstructure and magnetic properties of equiatomic FeNiCo alloy synthesized by mechanical alloying
15. Origin of the improved Bs for Fe-Si-B-Mn microalloyed amorphous alloys10.1016/j.jnoncrysol.2023.122375 ↗
16. Ferromagnetic element microalloying and clustering effects in high Bs Fe-based amorphous alloys10.1016/j.jmst.2017.04.016 ↗
17. Effect of Co addition on crystallization and magnetic properties of FeSiBPCu alloy10.1016/j.pnsc.2014.10.002 ↗
18. Some thermomagnetic and mechanical properties of amorphous Fe75Zr4Ti3Cu1B17 Ribbons10.3390/ma15010368 ↗
19. Excellent soft magnetic Fe-Co-B-based amorphous alloys with extremely high saturation magnetization above 1.85 T and low coercivity below 3 A/m10.1016/j.jallcom.2017.03.341 ↗
20. FeCo-based soft magnetic alloys with high Bs approaching 1.75 T and good bending ductility10.1016/j.jallcom.2016.08.250 ↗
21. Correlation between soft-magnetic properties and Tx1-Tc in high Bs FeCoSiBPC amorphous alloys10.1016/j.jallcom.2015.11.044 ↗
22. Effects of heat treatment on the structural properties and magnetic hyperfine parameters of Fe72Cr8Si8B12 amorphous ribbons10.1016/j.physb.2023.414997 ↗
23. Ultrafine-grained microstructure and controllable magnetic domains in Fe-based nanocrystalline alloys with excellent magnetic properties induced by hot isostatic pressing10.1016/j.jallcom.2022.163887 ↗
24. Interfacial energy of copper clusters in Fe-Si-B-Nb-Cu alloys10.1016/j.scriptamat.2018.11.039 ↗
25. Mechanisms of the magnetic properties improvement of amorphous soft magnetic Fe- and Co-based alloys as a result of the in-air heat treatment10.1016/j.phpro.2016.05.013 ↗
26. Cooling rate upon in air heat treatment and magnetic properties of amorphous soft magnetic alloys10.1016/j.jmmm.2017.11.056 ↗
27. Effect of primary α-Fe on soft magnetic properties of FeCuNbSiB amorphous/nanocrystalline alloy10.1016/j.jnoncrysol.2021.121079 ↗
28. Iron-based nanocrystalline alloys investigated by 57Fe Mössbauer spectrometry10.1023/A:1012663921858 ↗
29. R.J.G.U.D. Brand, WinNormos Mössbauer fitting program.[software] Duisburg, (2008).
30. Effect of heat treatment process on the structural and soft magnetic properties of Fe38Co38Mo8B15Cu ribbons10.1016/j.jnoncrysol.2019.119745 ↗
31. Annealing-induced different decolorization performances of Fe-Mo-Si-B amorphous alloys10.1016/j.jnoncrysol.2017.05.009 ↗
32. Air-oxidation of an amorphous Fe70C10P10B5Mo5 alloy at 400–500 °C10.1016/j.jallcom.2018.05.287 ↗
33. Influence of microgeometry of iron surface on the oxidation process – a comparison of multiscale geometric methods and their applicability10.1016/j.apsusc.2020.146838 ↗
34. The origin of hematite nanowire growth during the thermal oxidation of iron10.1016/j.mseb.2011.12.034 ↗
35. Review of the high-temperature oxidation of iron and carbon steels in air or oxygen10.1023/A:1023685905159 ↗
36. Effect of annealing in an external magnetic field on the magnetic texture of Mo-containing nanocrystalline alloys10.1007/s10582-006-0466-y ↗
37. T. Kaňčuch, M. Miglierini, A. Lancok, P. Švec, E.J.A.P.P.A. Illeková, Influence of cobalt substitution on hyperfine interactions in (Fe_1-xCo_x)_76Mo_8Cu_1B_15 alloys, 113 (2008) 63–66.10.12693/APhysPolA.113.63 ↗
38. Hyperfine interactions and crystallization kinetics of Co-substituted NANOPERM-Type alloys
39. Evolution of structure and local magnetic fields during crystallization of HITPERM glassy alloys studied by in situ diffraction and nuclear forward scattering of synchrotron radiation10.1039/C5CP00245A ↗
40. Magnetic and structural characterization of Mo-Hitperm alloys with different Fe/Co ratio10.1016/j.jallcom.2010.10.113 ↗