Thermal shock behavior of Fe-based amorphous coatings under cryogenic cycling treatment
Source abstract
Abstract
Fe-based amorphous coatings were deposited on invar alloy substrates by ADM-4D detonation-gun with different spraying parameters. The cryogenic cycling treatment (CCT) from 0 to 60 cycles was performed on the coatings to investigate the effects of CCT on the thermal shock behaviors of the coatings. In combination with finite element analysis and in-situ tensile test, the study revealed that the thermal shock behaviors of the coatings are primarily influenced by porosity and interfacial oxidation. The presence of pores in the sprayed coatings helps dissipate strain energy, thereby slowing down the initiation and propagation of cracks in the CCTed Fe-based ACs. On the other hand, interfacial oxidation causes a sudden increase in the maximum thermal stress in the oxidation regions, which is the primary cause of cracks in the coatings.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metal Alloys Wear and Properties · Metallic Glasses and Amorphous Alloys · High-Temperature Coating Behaviors
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (37)
Show source-provided references
1. Influence of the substrate on the formation of metallic glass coatings by cold gas spraying10.1007/s11666-016-0419-3 ↗
2. Fe-based bulk metallic glasses: glass formation, fabrication, properties and applications10.1016/j.pmatsci.2019.01.003 ↗
3. Superhydrophobic Fe-based amorphous coating fabricated by detonation spraying with excellent anti-corrosion and self-cleaning properties10.1007/s12598-022-02130-x ↗
4. Wettability and corrosion performance of arc-sprayed Fe-based amorphous coatings10.1016/j.surfcoat.2022.128129 ↗
5. Corrosion resistance mechanisms of detonation sprayed Fe-based amorphous coating on AZ31B magnesium alloy10.1016/j.jnoncrysol.2021.121276 ↗
6. Toughening Fe-based amorphous coatings by reinforcement of amorphous carbon10.1038/s41598-017-04504-z ↗
7. Dry sliding wear behaviors of Fe-based amorphous metallic coating synthesized by D-gun spray10.1016/j.jnoncrysol.2020.120018 ↗
8. Microstructure and mechanical properties of Fe-based amorphous alloy coatings prepared by ultra-high speed laser cladding10.1016/j.matlet.2021.130002 ↗
9. Interfacial characteristic and microstructure of Fe-based amorphous coating on magnesium alloy10.1016/j.surfcoat.2021.127659 ↗
10. Simultaneously enhancing wear and corrosion resistance of HVAF-sprayed Fe-based amorphous coating from Mo clad feedstock10.1016/j.jmatprotec.2021.117465 ↗
11. Laminar Fe-based amorphous composite coatings with enhanced bonding strength and impact resistance10.1016/j.actamat.2014.03.047 ↗
12. Study the effect of AT13 addition on the properties of AT13/Fe-based amorphous composite coatings10.1016/j.surfcoat.2019.125053 ↗
13. Zhou, Q., Luo, D.W., Hua, D.P., Ye, W.T., Li, S., Zou, Q.G., Chen, Z.Q., Wang, H.F. Design and characterization of metallic glass/graphene multilayer with excellent nanowear properties. Friction. 10 (2022) 1913–1926. doi:10.1007/s40544-021-0581-6.10.1007/s40544-021-0581-6 ↗
14. Wear behaviors of Fe-based amorphous composite coatings reinforced by Al2O3 particles in air and in NaCl solution10.1016/j.matdes.2015.08.142 ↗
15. Rejuvenation of metallic glasses by non-affine thermal strain10.1038/nature14674 ↗
16. Rejuvenation and plasticization of metallic glass by deep cryogenic cycling treatment10.1016/j.intermet.2017.11.015 ↗
17. Novel corrosion behaviours of the annealing and cryogenic thermal cycling treated Ti-based metallic glasses10.1016/j.intermet.2019.04.010 ↗
18. Toughness enhancement and heterogeneous softening of a cryogenically cycled Zr–Cu–Ni–Al–Nb bulk metallic glass10.1016/j.actamat.2019.07.012 ↗
19. The effect of cryogenic thermal cycling on aging, rejuvenation, and mechanical properties of metallic glasses10.1016/j.jnoncrysol.2018.09.041 ↗
20. Mechanical properties of amorphous alloys: in the framework of the microstructure heterogeneity
21. Improving the wear performance of a commercial Vit 1 amorphous alloy by a cryogenic cycling treatment10.1007/s10853-021-05794-5 ↗
22. Strategy for improving the wear-resistance properties of detonation sprayed Fe-based amorphous coatings by cryogenic cycling treatment10.1016/j.surfcoat.2021.126962 ↗
23. Physical properties of iron-oxide scales on Si-containing steels at high temperature10.2320/matertrans.M2009097 ↗
24. Fe-based amorphous/nanocrystalline composite coating by plasma spraying: effect of heat input on morphology, phase evolution and mechanical properties10.1016/j.jallcom.2018.09.024 ↗
25. Corrosion behaviour of plasma sprayed Fe based metallic glass (Fe73Cr2Si11B11C3 (at%) coatings in 3.5% NaCl solution10.1016/j.jnoncrysol.2021.120913 ↗
26. Residual stresses in high-velocity oxy-fuel thermally sprayed coatings – Modelling the effect of particle velocity and temperature during the spraying process10.1016/j.actamat.2007.05.031 ↗
27. Deposition mechanisms of metallic glass particles by Cold Gas Spraying10.1016/j.actamat.2016.12.007 ↗
28. Structural heterogeneities and mechanical behavior of amorphous alloys10.1016/j.pmatsci.2019.04.005 ↗
29. Estimation of residual stress and its effects on the mechanical properties of detonation gun sprayed WC–Co coatings10.1016/j.msea.2009.10.009 ↗
30. Residual stress in HVOF thermally sprayed thick deposits10.1016/j.surfcoat.2003.06.003 ↗
31. On the bonding strength in thermally sprayed Fe-based amorphous coatings10.1016/j.surfcoat.2012.12.018 ↗
32. Characterizations the deposition behavior and mechanical properties of detonation sprayed Fe-based amorphous coatings10.1016/j.jmrt.2022.03.140 ↗
33. Porosity and effective mechanical properties of plasma-sprayed Ni-based alloy coatings10.1016/j.apsusc.2008.10.120 ↗
34. Thermal shock resistance of γ-Y2Si2O7/Y2O3-Al2O3-SiO2 coating for porous Si3N4 ceramics10.1016/j.surfcoat.2018.09.078 ↗
35. The influence of coating compliance on the delamination of thermal barrier coatings10.1016/j.surfcoat.2010.01.018 ↗
36. Atmospheric plasma sprayed thermal barrier coatings with high segmentation crack densities: spraying process, microstructure and thermal cycling behavior10.1016/j.surfcoat.2011.06.032 ↗
37. Computational investigation of porosity effects on fracture behavior of thermal barrier coatings10.1016/j.ceramint.2019.07.031 ↗