Mechanical, wetting and corrosion properties of a Zr-based amorphous alloy composite consolidated by spark plasma sintering
Source abstract
Abstract
The bulk Zr 48Cu 47.5Al 4Co 0.5 amorphous alloy composites were successfully consolidated by spark plasma sintering under different sintering temperatures. Their mechanical, wetting and corrosion properties were investigated. The results show that the density and hardness increase firstly with increase in the sintering temperature, and then decrease when the sintering temperature exceeds 713K. The Cu 10Zr 7 and CuZr 2 phases continuously grow up with increasing sintering temperature. The growth rate of the volume fraction is ∼3.5 times larger for the Cu 10Zr 7 than for the CuZr 2 under present sintering conditions. The water contact angle decreases with increasing sintering temperature. In addition, the corrosion potential of the 713K-sintered sample is the highest. The corrosion current density of the 673K-sintered sample is 2∼3 times larger than that of the other samples under higher sintering temperatures. The growth mechanism for Cu 10Zr 7 and CuZr 2 phases and the corrosion mechanism are also discussed.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metallic Glasses and Amorphous Alloys
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (69)
Show source-provided references
1. Recent development and application products of bulk glassy alloys10.1016/j.actamat.2010.11.027 ↗
2. Super plastic bulk metallic glasses at room temperature10.1126/science.1136726 ↗
3. High-zirconium-based bulk metallic glasses with large plasticity10.1016/j.scriptamat.2010.03.065 ↗
4. Malleable hypoeutectic Zr-Ni-Cu-Al bulk glassy alloys with tensile plastic enlongation at room temperature10.1080/09500830902873575 ↗
5. Design of Zr-Al-Ni-Cu bulk metallic glasses with network structures10.1016/j.matdes.2014.05.049 ↗
6. A plastic Ni-free Zr-based bulk metallic glass with high specific strength and good corrosion properties in simulated body fluid10.1016/j.matlet.2012.06.057 ↗
7. A Ni-free high-zirconium-based bulk metallic glass with enhanced plasticity and biocompatibility10.1016/j.jnoncrysol.2013.05.023 ↗
8. In vitro investigation of novel Ni free Zr-based bulk metallic glass as potential biomaterials10.1016/j.matlet.2012.01.105 ↗
9. Novel low Cu content and Ni-free Zr-based bulk metallic glasses for biomedical applications10.1016/j.jnoncrysol.2012.09.026 ↗
10. Thermodynamic modelling to optimize glass forming composition in multicomponent Zr-Cu-Co-Al system
11. Antimicrobial Zr-based bulk metallic glasses for surgical devices applications10.1016/j.jnoncrysol.2021.120827 ↗
12. Formation and high mechanical strength of bulk glassy alloys in Zr–Al–Co–Cu system10.2320/matertrans.44.1839 ↗
13. Formation, thermal and mechanical properties of bulk glassy alloys in Zr–Al–Co and Zr–Al–Co–Cu systems10.1016/j.msea.2003.10.233 ↗
14. Eutectic crystallization during fracture of Zr–Cu–Co–Al metallic glass10.1016/j.msea.2016.01.096 ↗
15. Zr-Al-Co-Cu bulk metallic glasses for biomedical devices applications10.1016/j.jallcom.2017.09.144 ↗
16. Effects of B2 precipitate size on transformation-induced plasticity of Cu–Zr–Al glassy alloys10.1016/j.jallcom.2013.12.156 ↗
17. Bulk metallic glass composites with transformation-mediated work-hardening and ductility10.1002/adma.201000482 ↗
18. Electrical, thermal, and mechanical properties of Cu50Zr40Ti10 bulk amorphous composite10.1016/j.msea.2011.12.046 ↗
19. Consolidation and mechanical properties of ball milled Zr50Cu50 glassy ribbons10.1016/j.jallcom.2008.07.149 ↗
20. Bulk amorphous Al75V12.5Fe12.5-xCux alloys fabricated by consolidation of mechanically alloyed amorphous powders10.1016/j.jallcom.2013.10.099 ↗
21. Structure and mechanical properties of Al–Ni–Ti amorphous powder consolidated by pressure-less, pressure-assisted and spark plasma sintering10.1016/j.msea.2010.03.068 ↗
22. Synthesis and mechanical properties of bulk Al76Ni8Ti8Zr4Y4 alloy fabricated by consolidation of mechanically alloyed amorphous powders10.1016/j.jallcom.2015.01.269 ↗
23. Microwave-induced sintering of Cu-based metallic glass matrix composites in a single-mode 915-MHz applicator10.1007/s11661-010-0346-8 ↗
24. Formation of porous metallic glass compacts by electro-discharge sintering10.1016/j.jallcom.2011.02.116 ↗
25. Compaction of amorphous aluminum alloy powder by direct extrusion and equal channel angular extrusion10.1016/j.msea.2004.09.061 ↗
26. Consolidation and properties of ball-milled Ti50Cu18Ni22Al4Sn6 glassy alloy by equal channel angular extrusion10.1016/j.msea.2006.06.085 ↗
27. Crystallization behavior and consolidation of gas-atomized Al84Gd6Ni7Co3 glassy powder10.1016/j.jallcom.2009.10.178 ↗
28. Versatile fabrication of bulk metallic glass composites reinforced by dissimilar secondary phase10.1016/j.msea.2020.139643 ↗
29. Ultrasonic plasticity of metallic glass near room temperature
30. Laser 3D printing of Zr-based bulk metallic glass10.1016/j.jmapro.2019.02.020 ↗
31. Connecting structural defects to tensile failure in a 3D-printed fully-amorphous bulk metallic glass10.1016/j.msea.2021.141106 ↗
32. Understanding of crystallization behaviors in laser 3D printing of bulk metallic glasses
33. 3D printing of bulk metallic glasses10.1016/j.mser.2021.100625 ↗
34. Controllable additive manufacturing of gradient bulk metallic glass composite with high strength and tensile ductility10.1016/j.actamat.2021.116632 ↗
35. Selective laser melting of crack-free Fe-based bulk metallic glass via chessboard scanning strategy10.1016/j.matlet.2020.127824 ↗
36. Accelerated exploration of TRIP metallic glass composite by laser additive manufacturing10.1016/j.jmst.2020.10.057 ↗
37. High strength conductive bulk Cu-based alloy/metallic glass composites fabricated by spark plasma sintering10.1016/j.msea.2021.141919 ↗
38. Preparation and mechanical properties of tungsten-particle-reinforced Zr-based bulk-metallic-glass composites10.1016/j.msea.2021.141312 ↗
39. Processing of Hf based bulk metallic glass through spark plasma sintering (SPS) process10.1016/j.jallcom.2021.160057 ↗
40. Densification mechanism of Zr-based bulk metallic glass prepared by two-step spark plasma sintering10.1016/j.jallcom.2020.156724 ↗
41. Influence of powder shape on atomic diffusivity and resultant densification mechanisms during spark plasma sintering10.1016/j.jallcom.2019.06.176 ↗
42. Electric current activation of sintering: A review of the pulsed electric current sintering process10.1111/j.1551-2916.2010.04210.x ↗
43. Consolidation of Cu54Ni6Zr22Ti18 bulk amorphous alloy powders10.1016/j.msea.2005.04.044 ↗
44. Densification of pure magnesium by spark plasma sintering-discussion of sintering mechanism10.1016/j.apt.2019.08.012 ↗
45. An investigation on the effect of sintering mode on various properties of copper-graphene metal matrix composite10.1016/j.apt.2017.04.013 ↗
46. Effect of cooling rate on the volume fraction of B2 phases in a CuZrAlCo metallic glass matrix composite10.1016/j.intermet.2013.03.017 ↗
47. Phase-formation maps of CuZrAlCo metallic glass explored by in situ ultrafast techniques10.1016/j.actamat.2022.118371 ↗
48. Structure origin of a transition of classic-to-avalanche nucleation in Zr-Cu-Al bulk metallic glasses10.1016/j.actamat.2018.02.028 ↗
49. Effects of crystallization on mechanical behavior and corrosion performance of a ductile Zr68Al8Ni8Cu16 bulk metallic glass10.1016/j.jnoncrysol.2019.119782 ↗
50. The influence of spark plasma sintering temperature on the mechanical properties and corrosion resistance of Zr65Al10Ni10Cu15 metallic glass powder10.1016/j.intermet.2010.03.033 ↗
51. Mechanical and corrosion behaviour of as-cast and annealed Zr60Cu20Al10Fe5Ti5 bulk metallic glass10.1016/j.intermet.2012.04.007 ↗
52. Amorphous Zr-Cu thin-film alloys with metallic glass behavior10.1016/j.jallcom.2016.12.098 ↗
53. Fabrication of a Zr-based bulk metallic glass surface with extreme wettability10.1016/j.jnoncrysol.2020.120001 ↗
54. Investigations in the fabrication of surface patterns for wettability modification on a Zr-based bulk metallic glass by nanosecond laser surface texturing10.1016/j.jmatprotec.2020.116714 ↗
55. Surface patterning of Zr-based metallic glass by laser irradiation induced selective thermoplastic extrusion in nitrogen gas10.1088/1361-6439/aa71d5 ↗
56. Tunable hydrophobicity on fractal and micro-nanoscale hierarchical fracture surface of metallic glasses10.1016/j.matdes.2016.01.145 ↗
57. Corrosion resistance enhancement of CoCrFeMnNi high-entropy alloy fabricated by additive manufacturing10.1016/j.corsci.2020.108954 ↗
58. Corrosion resistance of a self-healing micro-arc oxidation/polymethyltrimethoxysilane composite coating on magnesium alloy AZ3110.1016/j.corsci.2017.01.025 ↗
59. Effect of annealing below the crystallization temperature on the corrosion behavior of Al–Ni–Y metallic glasses10.1016/j.corsci.2014.03.015 ↗
60. Effect of the aluminium content of AlxCrFe1.5MnNi0.5 high-entropy alloys on the corrosion behaviour in aqueous environments10.1016/j.corsci.2008.04.011 ↗
61. Electrochemical characterization of ZrTi alloys for biomedical applications10.1016/j.electacta.2012.10.026 ↗
62. Effect of yttrium on the corrosion behaviour of 09CrCuSb alloy in concentrated sulphuric acid10.1016/j.corsci.2013.01.005 ↗
63. Corrosion behavior of bulk (Zr58Nb3Cu16Ni13Al10)100-xYx (x = 0, 0.5, 2.5 at.%) metallic glasses in sulfuric acid10.1016/j.corsci.2019.01.016 ↗
64. Corrosion behavior of Ni62Nb33Zr5 bulk metallic glasses after annealing and cryogenic treatments
65. Correlation between corrosion performance and surface wettability in ZrTiCuNiBe bulk metallic glasses10.1063/1.3429591 ↗
66. Review of non-reactive and reactive wetting of liquids on surfaces10.1016/j.cis.2007.04.009 ↗
67. Effects of crystallization on mechanical behavior and corrosion performance of a ductile Zr68Al8Ni8Cu16 bulk metallic glass10.1016/j.jnoncrysol.2019.119782 ↗
68. Mechanical performance and corrosion behaviour of Zr-based bulk metallic glass produced by selective laser melting10.1016/j.matdes.2020.108532 ↗
69. Corrosion resistance of crystalline and amorphous CuZr alloys in NaCl aqueous environment and effect of corrosion inhibitors10.1016/j.jallcom.2021.160464 ↗