Ni-Nb amorphous coating prepared by mechanical alloying method
Source abstract
Abstract
Abstract In this study, Ni-Nb amorphous coating was deposited on a carbon steel CK45 substrate, in cubic and disc shapes, using the mechanical alloying method. The disc substrate was fixed at the bottom of the vial, whereas the cubic substrate was placed in the vial along with the milling balls. The coating was characterized by scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS) and X-ray diffraction (XRD). Also, cross-sectional microhardness is measured. After 75 h MA, Ni-Nb amorphous coating was deposited on the substrates. Ni-Nb amorphous coating formed on disc substrate had a higher thickness with higher volume fraction of amorphous phase, when compared to the coating formed on cubic substrate.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metallic Glasses and Amorphous Alloys · High Entropy Alloys Studies · Electrodeposition and Electroless Coatings
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (36)
Show source-provided references
1. The case for balk metallic glass10.1016/S1369-7021(04)00124-5 ↗
2. Fabrication and mechanical properties of Ni-Nb metallic glass particle-reinforced Al-based metal matrix composite10.1016/j.scriptamat.2006.01.001 ↗
3. Sharma · 2008
4. Mechanical alloying and milling suryanaraya10.1016/S0079-6425(99)00010-9 ↗
5. The formation and thermal stability of amorphous Ni-Nb alloy powder synthesized by mechanical alloying10.1016/S0022-3093(87)80263-6 ↗
6. Amorphization of Ni60Nb20Zr20 by mechanical alloying10.1016/j.msea.2003.10.061 ↗
7. Amorphization by mechanical alloying10.1016/0022-3093(90)90620-2 ↗
8. Amorphization and nanocrystallization of Ni–Nb-Si Alloys10.1016/j.msea.2016.11.041 ↗
9. Amorphization by ball milling. A review10.1016/0921-4526(88)90038-5 ↗
10. Microstructure and property of Fe-Co-B-Si-C-Nb amorphous composite coating fabricated by laser cladding process10.1016/j.apsusc.2013.04.077 ↗
11. Structural and thermal behavior of Fe-Cr-Mo-P-B-C-Si amorphous and nanocrystalline HVOF coatings10.1007/s11666-010-9507-y ↗
12. Fabrication of amorphous Zr48Cu36Al 8Ag8 thin films by ion beam sputtering and their corrosion behavior in SBF for bio implants10.1016/j.jallcom.2013.03.099 ↗
13. Corrosion behavior of TiZrNiCuBe metallic glass coatings synthesized by electrospark deposition10.1016/j.corsci.2014.03.017 ↗
14. C.B. Ma, F.H. Cao, Z. Zhang, J.Q. Zhang, Electrodeposition of amorphous Ni – P coatings onto Nd – Fe – B permanent magnet substrates, 253 (2006) 2251–2256. doi:10.1016/j.apsusc.2006.04.037.10.1016/j.apsusc.2006.04.037 ↗
15. Microstructures and properties of NiAl-TiC nanocomposite coatings on carbon steel surfaces produced by mechanical alloying technique10.1016/j.surfcoat.2013.10.071 ↗
16. Effect of process parameters on the formation of Ti-Al coatings fabricated by mechanical milling10.1016/j.jallcom.2009.05.016 ↗
17. Fabrication of TiN coatings using mechanical milling techniques10.1016/j.ijrmhm.2008.10.005 ↗
18. A comparative investigation on bi-layer Al–Cr/Al–Si coating and mono-layer Al–Cr–Si coating synthesized on Ti–6Al–4 V alloy substrate by mechanical alloying method10.1016/j.jallcom.2017.03.082 ↗
19. In situ nanocrystalline Fe-Si coating by mechanical alloying10.1016/j.jallcom.2009.04.048 ↗
20. Structural evolution of the Ti-Al coatings produced by mechanical alloying technique10.1016/j.jallcom.2008.07.199 ↗
21. Formation of Fe-Al intermetallic coating on low-carbon steel by a novel mechanical alloying technique10.1016/j.powtec.2013.07.002 ↗
22. Formation of nanostructured NiAl coating on carbon steel substrate by using mechanical alloying10.1016/j.apsusc.2012.09.151 ↗
23. Evaluation of the volume fraction of nanocrystals devitrified in Al-based amorphous alloys10.1016/j.jnoncrysol.2008.12.001 ↗
24. Evaluation of the volume fraction crystallised during devitrification of Al-based amorphous alloys
25. Quantitative phase analysis in Al86Ni8Y6 bulk glassy alloy synthesized by consolidating mechanically alloyed amorphous powder via spark plasma sintering10.1016/j.matdes.2015.12.129 ↗
26. Microstructure and wear resistance of Fe-Cr-Mo-Co-C-B amorphous composite coatings10.3390/met8080622 ↗
27. Formation and corrosion behavior of Fe-based amorphous metallic coatings by HVOF thermal spraying10.1016/j.surfcoat.2009.08.025 ↗
28. Coating of Al substrate by metallic Ni through mechanical alloying10.1016/j.jallcom.2009.08.150 ↗
29. Application of mechanical alloying/milling for synthesis of nanocrystalline and amorphous materials10.1179/1743280414Y.0000000036 ↗
30. High temperature tribological behavior of tetrahedral amorphous carbon (ta-C) and fluorinated ta-C coatings against aluminum alloys10.1016/j.surfcoat.2015.08.071 ↗
31. Amorphous oxide film formed by dynamic oxidation during kinetic spraying of titanium at high temperature and its role in subsequent coating formation10.1016/j.scriptamat.2010.03.061 ↗
32. Deposition of the Ti-Al coatings on different metallic substrates by mechanical alloying and subsequent laser treatment10.1016/j.jallcom.2017.09.090 ↗
33. Amorphous Co-doped MoS2 nanosheet coated metallic CoS2 nanocubes as an excellent electrocatalyst for hydrogen evolution10.1039/C5TA03410H ↗
34. Investigation of Cr-Al composite coatings fabricated on pure Ti substrate via mechanical alloying method: effects of Cr-Al ratio and milling time on coating, and oxidation behavior of coating10.1016/j.jallcom.2015.11.094 ↗
35. Microstructures and oxidation behavior of Al-CrMnFeCoMoW composite coatings on Ti-6Al-4 V alloy substrate via high-energy mechanical alloying method10.1016/j.jallcom.2018.11.266 ↗
36. Fabrication of Ti-Al coatings by mechanical alloying method10.1016/j.surfcoat.2006.06.044 ↗