Experimental validation of glass forming ability of melt spun ribbons of pig iron and its derivative compositions and their corrosion behavior
Source abstract
Abstract
Abstract In the present study, pig iron (alloy I) and its derivative compositions (alloy II and III) were used to form ribbons by melt spinning at different melt spun speeds. Glass forming behavior of the alloys was experimentally validated by characterizing the ribbon samples by X-ray diffraction (XRD), differential scanning calorimetry (DSC), scanning electron microscope (SEM) and transmission electron microscope (TEM). The corrosion behavior of the ribbons was investigated by linear polarization, dynamic polarization and electrochemical impedance spectroscopy (EIS) in 3.5% freely-aerated NaCl solution. Glass forming ability and corrosion resistance of ribbons of alloy I were found to increase with higher melt spun speed, whereas the ribbons made of alloy II and III in general showed comparable glass forming ability and corrosion resistance at all the melt spun speeds. The highest corrosion resistance of the ribbons of the alloy II attributes to the complete amorphous structure as well as Cr2O3 formation.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metallic Glasses and Amorphous Alloys · Cultural Heritage Materials Analysis · Pigment Synthesis and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (31)
Show source-provided references
1. Recent development and application products of bulk glassy alloys10.1016/j.actamat.2010.11.027 ↗
2. Structural and mechanical characteristics of metallic glasses,
3. Mechanical properties of bulk metallic glasses10.1016/j.pmatsci.2010.04.002 ↗
4. Non-crystalline structure in solidified gold-silicon alloys10.1038/187869b0 ↗
5. Glassy blast furnace pig iron and design of other glassy compositions using thermodynamic calculations10.1016/j.jnoncrysol.2018.01.029 ↗
6. Iron-based bulk metallic glasses10.1179/1743280412Y.0000000007 ↗
7. Under what conditions can a glass be formed ?10.1080/00107516908204405 ↗
8. Al-La-Ni amorphous alloys with a wide supercooled liquid region10.2320/matertrans1989.30.965 ↗
9. A new glass-forming ability criterion for bulk metallic glasses10.1016/S1359-6454(02)00166-0 ↗
10. On the parameters to assess the glass forming ability of liquids10.1016/j.jnoncrysol.2005.03.006 ↗
11. Critical evaluation of glass forming ability criteria10.1179/1743284715Y.0000000104 ↗
12. Inoue · 1998 · 1
13. Calculations of mixing enthalpy and mismatch entropy for ternary amorphous alloys10.2320/matertrans1989.41.1372 ↗
14. Prediction of glass forming ability using thermodynamic parameters10.1007/s12666-012-0215-9 ↗
15. Electrochemical behavior of multicomponent amorphous and nanocrystalline Zr-based alloys in different environments10.1016/j.corsci.2005.09.001 ↗
16. The corrosion behaviors of Fe-based bulk metallic glasses in a sulfuric solution at 70 °C10.1016/j.intermet.2010.01.020 ↗
17. Partial crystallization and corrosion resistance of amorphous Fe-Cr-M-B (M=Mo, Nb) Alloys10.1016/j.jnoncrysol.2010.04.051 ↗
18. Effects of Cr contents in Fe-based bulk metallic glasses on the glass forming ability and the corrosion resistance10.1016/j.matchemphys.2008.08.057 ↗
19. Electrochemical behavior of HVOF-sprayed amorphous and nanocrystalline Fe-based Fe73.13Si11.12B10.79Cr2.24C2.72 composite coatings10.1007/s11665-017-2997-8 ↗
20. Composite (glass + crystalline) coatings from blast furnace pig iron by high velocity oxy-fuel (HVOF) process and their electrochemical behavior10.1016/j.surfcoat.2019.05.025 ↗
21. Classification of bulk metallic glasses by atomic size difference, heat of mixing and period of constituent elements and its application to characterization of the main alloying element10.2320/matertrans.46.2817 ↗
22. Equilibrium thermodynamic properties of the mixture of hard spheres
23. Cross-sectional transmission electron microscopy specimen preparation technique by backside Ar ion milling10.9729/AM.2015.45.4.189 ↗
24. Amorphization induced by focused ion beam milling in metallic and electronic materials10.1017/S1431927613012282 ↗
25. Amorphization during sample preparation by ion milling10.1016/0022-3115(92)90380-4 ↗
26. 2015 · 89
27. The effect of the melt-spinning processing parameters on the rate of cooling10.1016/S0921-5093(01)01346-6 ↗
28. Melt-spinning technique for preparation of metallic glasses10.1007/BF02824962 ↗
29. Effect of harmonic microstructure on the corrosion behavior of SUS304L austenitic stainless steel10.1007/s11661-016-3758-2 ↗
30. Effect of Mo content on glass forming ability and crystallization behavior of Fe-based alloy prepared by atmospheric plasma spraying10.1016/j.rinp.2019.102512 ↗
31. Classification of crystallization process Fe-B-Si amorphous alloys by electrical resistivity and calorimetric measurements10.2320/matertrans1989.41.1077 ↗