Effects of pre-compression on the microstructure, mechanical properties and corrosion resistance of Cu47.5Zr47.5Al5 bulk metallic glasses
Source abstract
Abstract
Abstract The effects of pre-compression treatment at room temperature on the microstructures, mechanical properties, and corrosion resistance in the seawater solution of Cu47.5Zr47.5Al5 bulk metallic glasses (BMGs) have been investigated. The amount and size of B2-CuZr nanocrystallites precipitated from the glass matrix increase with enhancing the pre-compression stress, which suggests that the appropriate pre-compression treatment promotes the formation of metallic glass matrix composites (MGMCs). The 850 MPa pre-compressed MGMC possesses the highest compressive fracture strength (1814 MPa) and a certain degree of plasticity, as well as the larger hardness of 700 HV. The 1415 MPa pre-compressed MGMC with more B2-CuZr nanocrystallites demonstrates advantages in thermal stability and corrosion resistance in the seawater solution. It shows the higher corrosion resistance with the most positive corrosion potential and the lower corrosion current density than the other tested samples. These can be attributed to the structural homogeneity after appropriate precipitation of nanocrystallites.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metallic Glasses and Amorphous Alloys · High Entropy Alloys Studies · Recycling and utilization of industrial and municipal waste in materials production
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (33)
Show source-provided references
1. Improving plasticity and work-hardening capability of β-type bulk metallic glass composites by destabilizing β phases10.1016/j.msea.2017.02.070 ↗
2. Mechanism for microstructural evolution induced by high temperature deformation in Zr-based bulk metallic glasses10.1016/j.jallcom.2016.03.145 ↗
3. New soft magnetic Fe25Co25Ni25(P, C, B)25 high entropy bulk metallic glasses with large supercooled liquid region10.1016/j.jallcom.2016.09.144 ↗
4. Improved mechanical properties and pitting corrosion resistance of Zr65Cu17.5Fe10Al7.5 bulk metallic glass by isothermal annealing10.1016/j.jnoncrysol.2016.08.014 ↗
5. Designing ductile CuZr-based metallic glass matrix composites10.1016/j.msea.2016.11.079 ↗
6. Excellent plasticity of a new Ti-based metallic glass matrix composite upon dynamic loading10.1016/j.msea.2016.09.057 ↗
7. Transformation-induced plasticity in bulk metallic glass composites evidenced by in-situ neutron diffraction10.1016/j.actamat.2016.11.029 ↗
8. Microstructural control via copious nucleation manipulated by in situ formed nucleants: large-sized and ductile metallic glass composites10.1002/adma.201601954 ↗
9. Correlation between atomic-level structure, packing efficiency and glass-forming ability in Cu-Zr metallic glasses10.1016/j.jnoncrysol.2014.07.035 ↗
10. Pitting corrosion of Cu-Zr metallic glasses in hydrochloric acid solutions10.1016/j.jallcom.2007.08.023 ↗
11. Metallic glass matrix composites10.1016/j.mser.2015.12.001 ↗
12. Tuning plasticity of in-situ dendrite metallic glass composites via the dendrite-volume-fraction-dependent shear banding10.1016/j.msea.2016.10.085 ↗
13. Temperature, strain rate and reinforcement volume fraction dependence of plastic deformation in metallic glass matrix composites10.1016/j.actamat.2007.01.009 ↗
14. Large-sized CuZr-based bulk metallic glass composite with enhanced mechanical properties10.1016/j.jmst.2014.01.014 ↗
15. Role of nanometer-scale quasicrystals in improving the mechanical behavior of Ti-based bulk metallic glasses10.1063/1.1616198 ↗
16. Effects of pre-compression on the microstructure, mechanical properties and corrosion resistance of RE65Co25Al10 (RECe, La, Pr, Sm and Gd) bulk metallic glasses10.1016/j.intermet.2015.06.011 ↗
17. Plasticity improvement for dendrite/metallic glass matrix composites by pre-deformation10.1016/j.matdes.2015.07.109 ↗
18. Micro-mechanical behavior of porous tungsten/Zr-based metallic glass composite under cyclic compression10.1016/j.msea.2015.07.030 ↗
19. Effect of rolling deformation on the microstructure of bulk Cu60Zr20Ti20 metallic glass and its crystallization10.1016/j.actamat.2006.05.030 ↗
20. Microstructure, thermal stability and mechanical properties of Zr-Cu-Al-Sn bulk metallic glass10.1016/j.jnoncrysol.2015.09.016 ↗
21. Deformation-induced nanocrystallization and its influence on work hardening in a bulk amorphous matrix composite10.1016/j.actamat.2003.11.034 ↗
22. Effect of Nb on the glass-forming ability of mechanically alloyed Fe-Ni-Zr-B alloys10.1016/j.scriptamat.2007.11.004 ↗
23. Flow serration and shear-band propagation in porous Mo particles reinforced Mg-based bulk metallic glass composites10.1016/j.intermet.2010.03.024 ↗
24. Serration behavior in Zr-Cu-Al glass-forming systems10.1016/S1006-706X(16)30009-7 ↗
25. Effect of pre-existing shear bands on the tensile mechanical properties of a bulk metallic glass10.1016/j.actamat.2009.10.032 ↗
26. Difference in compressive and tensile fracture mechanisms of Zr59Cu20Al10Ni8Ti3 bulk metallic glass10.1016/S1359-6454(02)00521-9 ↗
27. Formation of bulk metallic glass in situ composites in Cu50Zr45Ti5 alloy10.1016/j.jallcom.2006.05.063 ↗
28. Fracture mechanisms in bulk metallic glassy materials10.1103/PhysRevLett.91.045505 ↗
29. Localized shear deformation and softening of bulk metallic glass: stress or temperature driven?10.1038/srep02798 ↗
30. Electrochemical behavior of partially crystallized amorphous Al86Ni9La5 alloys10.1016/j.mseb.2010.08.011 ↗
31. Effect of annealing on the microstructure, microhardness, and corrosion resistance of Ni62Nb33Zr5 metallic glass and its composites10.1016/j.jnoncrysol.2015.05.027 ↗
32. Passivation behaviour of structurally relaxed Zr48Cu36Ag8Al8 metallic glass10.1016/j.jallcom.2009.01.056 ↗
33. Phase transition of Zr41Ti14Cu12.5Ni10Be22.5 bulk amorphous below glass transition temperature under high pressure10.1063/1.1343502 ↗