Effect of laser irradiation on high-temperature crystallization behavior, oxidation resistance, and corrosion performance evaluation of electrodeposited amorphous Ni-P coatings
Source abstract
Abstract
Amorphous Ni-P alloys crystallize at high temperatures, which leads to the deterioration of resistivity and corrosion resistance. In this study, the use of laser irradiation with the electrodeposition (ECD) process for preparing amorphous Ni-P coatings was investigated; and the resistivity and corrosion resistance were analyzed, which is related to crystallization process, surface morphology, residual internal stress, and oxidation layer. The results indicates that the crystallization rate of Ni-P coating prepared by laser-assisted electrodeposition (LECD) was slower than that of ECD coating. With increasing ambient temperature, the internal tensile stress first decreased and then increased. The LECD coating has better oxidation resistance, with XPS indicating the oxide layer mainly comprised Ni-O compounds. At the same ambient temperature, the resistivity of the LECD coating was higher than that of the ECD coating. The Ni-P coating had better corrosion resistance after heating, and the corrosion mechanism changes from stress corrosion to pitting corrosion.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Electrodeposition and Electroless Coatings · Metallic Glasses and Amorphous Alloys · High Entropy Alloys Studies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (31)
Show source-provided references
1. Effects of structural relaxation and crystallization on the corrosion resistance of an Fe-based amorphous coating10.1016/j.jnoncrysol.2020.120378 ↗
2. Fast electrodeposition of Ni/Ni(OH)2 nanoparticles on nanoporous Cu prepared by dealloying Zr-Cu amorphous alloy for supercapacitor application10.1016/j.electacta.2019.135591 ↗
3. Comprehensive study of the crystallization behavior, thermal stability, and magnetic properties of Co66.5Si15.5B12Fe4Ni2 amorphous ribbon10.1016/j.jnoncrysol.2021.121132 ↗
4. Tu · 2016
5. Chen · 2003
6. Ultrasonic-assisted electrodeposition of Cu-Sn-TiO2 nanocomposite coatings with enhanced antibacterial activity10.1016/j.ultsonch.2021.105593 ↗
7. Effect of magnetic field on abnormal co-deposition and performance of Fe-Ni alloy based on laser irradiation10.1016/j.jelechem.2021.115967 ↗
8. Effect of Laser Energy on Surface Quality and Properties of Electrodeposited Nickel-Cobalt-Tungsten (Ni-Co-W) Coating10.1149/1945-7111/ac1e54 ↗
9. Effect of laser irradiation on the electrodeposition process, mechanical and corrosion properties of an amorphous Ni-P coating10.1016/j.surfcoat.2021.127961 ↗
10. Laser assisted metal electrodeposition: comprehensive investigation of zinc deposition10.1016/0009-2509(90)80130-7 ↗
11. Influence of laser assistance on the nucleation and growth processes occuring during the electrodeposition of zinc10.1016/0169-4332(92)90062-3 ↗
12. Maskless zinc electrodeposition assisted by a pulsed laser beam10.1007/BF00251021 ↗
13. Thermal effects of a laser beam on the electrodeposition of Ni-P alloys10.1023/A:1003253903124 ↗
14. A study on the formation conditions of amorphous nickel-phosphorus (Ni-P) alloy by laser-assisted electrodeposition10.1016/j.apsusc.2020.147707 ↗
15. Effect of laser single pulse energy on micro-structural, mechanical and corrosion properties of amorphous Ni-Fe-P alloy prepared by laser-assisted electrodeposition
16. Study on application of laser in maskless localized electrodeposition and surface quality enhancement10.1016/j.optlastec.2021.107383 ↗
17. Pulsed laser irradiation-assisted electrodeposition of germanium in ionic liquid: from amorphous film to polycrystalline branched structures10.1016/j.materresbull.2017.05.008 ↗
18. Pulsed laser-assisted ionic liquid electrodeposition of gallium nanoparticles and germanium nanostructures for energy storage10.1016/j.cplett.2018.03.023 ↗
19. Excellent soft magnetic properties in Co-based amorphous alloys after heat treatment at temperatures near the crystallization onset10.1016/j.jallcom.2021.161740 ↗
20. A very low temperature (-170°C) crystallization of amorphous-Ge thin film on glass via Au induced layer exchange process in amorphous-Ge/GeOx/Au/glass stack and electrical characterization
21. Impact of the processing temperature on the crystallization behavior and mechanical properties of poly[R-3-hydroxybutyrate-Co-(R-3-hydroxyvalerate)]10.1016/j.polymer.2021.123987 ↗
22. Cu-based amorphous alloy plates fabricated via twin-roll strip casting10.1016/j.msea.2021.142123 ↗
23. Structural origin of magnetic softening in a Fe-based amorphous alloy upon annealing10.1016/j.jmst.2021.01.098 ↗
24. Crystallization micro-mechanism of near-eutectic amorphous Ni-P10.1016/j.actamat.2015.11.005 ↗
25. Structural evolution of electroless Ni-P coating on Al-12wt.% Si alloy during heat treatment at high temperatures10.1016/j.apsusc.2008.10.026 ↗
26. Structure and phase transformation behavior of electroless Ni-P alloys containing tin and tungsten10.1016/j.jallcom.2006.07.045 ↗
27. Microstructure evolution and corrosion resistance of Ni-Cu-P amorphous coating during crystallization process10.1016/j.apsusc.2019.04.142 ↗
28. Development of amorphous Ni-P coating over API X70 steel for hydrogen barrier application10.1016/j.surfcoat.2020.126356 ↗
29. The influence of hydrogen absorption on the electrical resistivity and mechanical properties of Zr-based amorphous alloy10.1016/j.jnoncrysol.2013.01.032 ↗
30. Pecularities of electrical resistivity during transformations in amorphous and nanocrystalline alloys10.1016/j.jallcom.2006.08.124 ↗
31. Understanding the impedance of CNOs-graphene hybrid electrode through both experimental and simulated electrochemical impedance spectrum10.1016/j.electacta.2021.137839 ↗