Role of graphene in enhancing indentation and scratch properties of soda lime silicate glass
Source abstract
Abstract
In this work, the role of graphene on indentation and scratch properties of soda lime silicate (SLS) glass is investigated by nanoindentation and nanoscratch as well as Vickers indentation tests. The results show that compared with bare SLS glass, the nanohardness and reduced modulus of graphene coated on SLS (G/SLS) glass are higher, because G/SLS glass surface can accommodate more strain energy through elastic process. The nanoscratch resistance of G/SLS glass is increased by ∼30%-44%, since the monolayer graphene can effectively reduce the friction force and activation volume of SLS glass during the mechanochemical wear process in humid air. Furthermore, the subsurface damage of G/SLS glass upon nanoindentation and nanoscratch tests are reduced, and the Vickers hardness and indentation fracture toughness of G/SLS glass are increased. These results clearly show the monolayer graphene can protect the SLS glass surface from physical contact via both normal and tangential shear tests.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Diamond and Carbon-based Materials Research · Advanced Surface Polishing Techniques · Advanced ceramic materials synthesis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (72)
Show source-provided references
1. New calibration of partial material factors for the structural design of float glass. Comparison of bounded and unbounded statistics for glass strength10.1016/j.conbuildmat.2016.05.136 ↗
2. Practical fundamentals of glass, rubber, and plastic sterile packaging systems10.3109/10837450903511178 ↗
3. Quantitative analysis of scratch-induced microabrasion on silica glass10.1016/j.jnoncrysol.2017.05.003 ↗
4. Subsurface structural change of silica upon nanoscale physical contact: chemical plasticity beyond topographic elasticity10.1016/j.actamat.2021.116694 ↗
5. Nanoindentation of soda lime–silica glass: effect of loading rate10.1111/j.2041-1294.2011.00046.x ↗
6. Enhancement in nanohardness of soda–lime–silica glass10.1016/j.jnoncrysol.2011.03.036 ↗
7. Strain-rate sensitivity of glasses10.1016/j.jnoncrysol.2014.08.023 ↗
8. Effect of scratching speed on deformation of soda–lime–silica glass10.1007/s00339-012-6844-3 ↗
9. Effect of load in scratch experiments on soda lime silica glass10.1016/j.jnoncrysol.2012.02.006 ↗
10. Lateral hardness and the scratch resistance of glasses in the Na2O-CaO-SiO2 system10.1016/j.jnoncrysol.2018.04.022 ↗
11. Nanomechanical properties inside the scratch grooves of soda–lime–silica glass10.1007/s00339-012-6828-3 ↗
12. Novel combined scratch and nanoindentation experiments on soda-lime-silica glass10.1111/j.2041-1294.2011.00073.x ↗
13. Hydronium ions in soda-lime silicate glass surfaces10.1111/jace.12136 ↗
14. Effects of contact pressure, counter-surface and humidity on wear of soda-lime-silica glass at nanoscale10.1016/j.triboint.2015.10.027 ↗
15. Mechanochemical wear of soda lime silica glass in humid environments10.1111/jace.13014 ↗
16. Atomistic understanding of surface wear process of sodium silicate glass in dry versus humid environments10.1111/jace.17008 ↗
17. Chemical strengthening of glass: lessons learned and yet to be learned10.1111/j.2041-1294.2010.00010.x ↗
18. Effects of tempering and heat strengthening on hardness, indentation fracture resistance, and wear of soda lime float glass10.1111/ijag.13507 ↗
19. Characterisation of the scratch resistance of annealed and tempered architectural glass10.1016/j.tsf.2011.04.104 ↗
20. Surface reliability of annealed and tempered solar protective glasses: indentation and scratch behavior10.1016/j.solener.2016.12.011 ↗
21. Differences in surface failure modes of soda lime silica glass under normal indentation versus tangential shear: A comparative study on Na+/K+ ion exchange effects10.1111/jace.16019 ↗
22. Differences in indentation and wear behaviors between the two sides of thermally tempered soda lime silica glass10.1111/jace.17872 ↗
23. Few layer graphene to reduce wear and friction on sliding steel surfaces10.1016/j.carbon.2012.11.061 ↗
24. Friction and atomic-layer-scale wear of graphitic lubricants on SiC (0001) in dry sliding10.1016/j.wear.2013.01.108 ↗
25. Friction and wear on single-layer epitaxial graphene in multi-asperity contacts10.1007/s11249-012-9945-4 ↗
26. Direct CVD growth of graphene on traditional glass: methods and mechanisms
27. Graphene glass from direct CVD routes: production and applications10.1002/adma.201602247 ↗
28. Graphene coatings as barrier layers to prevent the water-induced corrosion of silicate glass10.1021/acsnano.6b04363 ↗
29. Raman spectroscopy as a versatile tool for studying the properties of graphene10.1038/nnano.2013.46 ↗
30. Interference phenomenon in graphene-enhanced Raman scattering10.1021/jp111502n ↗
31. Raman scattering from high-frequency phonons in supported n-graphene layer films10.1021/nl061420a ↗
32. Double resonant Raman scattering in graphite10.1103/PhysRevLett.85.5214 ↗
33. Evolution of HF etching rate of borosilicate glass by friction-induced damages10.1016/j.apsusc.2019.144789 ↗
34. Measurement of thin film mechanical properties using nanoindentation10.1557/S0883769400041634 ↗
35. The mechanical properties of float glass surfaces measured by nanoindentation and acoustic microscopy10.1016/j.actamat.2010.11.045 ↗
36. The impact of densification on indentation fracture toughness measurements10.1111/jace.16793 ↗
37. Environment dependence of hardness and fracture toughness of soda lime silica glass in humid and liquid conditions10.1016/j.jnoncrysol.2021.120985 ↗
38. Measurement of hardness and elastic modulus by instrumented indentation: advances in understanding and refinements to methodology10.1557/jmr.2004.19.1.3 ↗
39. Elastic recovery at hardness indentations10.1007/BF02402837 ↗
40. Understanding the role of post-indentation recovery on the hardness of glasses: case of silica, borate, and borosilicate glasses10.1016/j.jnoncrysol.2020.119955 ↗
41. Influences of stress on the measurement of mechanical properties using nanoindentation: part I. Experimental studies in an aluminum alloy10.1557/JMR.1996.0091 ↗
42. Influence of residual stress on elastic modulus and hardness of soda-lime glass measured by nanoindentation10.1557/JMR.2004.0404 ↗
43. Influence of the residual stress on the nanoindentation-evaluated hardness for zirconium nitride films10.1016/j.surfcoat.2012.01.021 ↗
44. Incipient plasticity and fully plastic contact behavior of copper coated with a graphene layer10.1063/1.5086333 ↗
45. Measurement of the elastic properties and intrinsic strength of monolayer graphene10.1126/science.1157996 ↗
46. Adhesionless and near-ideal contact behavior of graphene on Cu thin film10.1016/j.carbon.2017.06.037 ↗
47. Atomic scale mechanisms of friction reduction and wear protection by graphene10.1021/nl5037403 ↗
48. A generalized analytical model for the elastic deformation of an adhesive contact between a sphere and a flat surface10.1016/S0021-9797(03)00049-3 ↗
49. General relationship between strength and hardness10.1016/j.msea.2011.08.061 ↗
50. Effects of humidity and counter-surface on tribochemical wear of soda-lime-silica glass10.1016/j.wear.2015.08.016 ↗
51. On the effect of tribo-corrosion on reciprocating scratch behaviors of phosphate laser glass10.1111/ijag.12330 ↗
52. Factors governing wear of soda lime silicate glass: Insights from comparison between nano-and macro-scale wear10.1016/j.triboint.2022.107566 ↗
53. Mechanisms of antiwear tribofilm growth revealed in situ by single-asperity sliding contacts10.1126/science.1258788 ↗
54. Mechanochemistry at solid surfaces: polymerization of adsorbed molecules by mechanical shear at tribological interfaces10.1021/acsami.6b14159 ↗
55. Activation volume in shear‑driven chemical reactions10.1007/s11249-021-01522-x ↗
56. Interplay between counter-surface chemistry and mechanical activation in mechanochemical removal of N-faced GaN surface in humid ambient10.1016/j.triboint.2021.107004 ↗
57. Oxidation-induced changes of mechanochemical reactions at GaAs-SiO2 interface: the competitive roles of water adsorption, mechanical property, and oxidized structure10.1016/j.apsusc.2021.149205 ↗
58. Superlubricity of graphite induced by multiple transferred graphene nanoflakes
59. Effect of native oxide layer on mechanochemical reaction at the GaN-Al2O3 interface10.3389/fchem.2021.672240 ↗
60. Y. Qi, J. Liu, Y. Dong, X.Q. Feng, Q. Li, Impacts of environments on nanoscale wear behavior of graphene: Edge passivation vs. substrate pinning. Carbon. 139 (2018) 59-66. 10.1016/j.carbon.2018.06.029.10.1016/j.carbon.2018.06.029 ↗
61. Relaxation of scratch-induced surface deformation in silicate glasses: role of densification and shear flow in lateral indentation experiments10.1016/j.jnoncrysol.2018.08.032 ↗
62. Friction-induced subsurface densification of glass at contact stress far below indentation damage threshold10.1016/j.actamat.2020.03.005 ↗
63. Quantitative evaluation of indentation-induced densification in glass10.1557/jmr.2005.0418 ↗
64. Effect of humidity on friction, wear, and plastic deformation during nanoscratch of soda lime silica glass10.1111/jace.18147 ↗
65. Grain refinement: a mechanism for graphene nanoplatelets to reduce friction and wear of Ni3Al matrix self-lubricating composites10.1016/j.wear.2013.12.014 ↗
66. Incipient plasticity and fully plastic contact behavior of copper coated with a graphene layer10.1063/1.5086333 ↗
67. Indentation deformation in oxide glasses: quantification, structural changes, and relation to cracking
68. Toughness and strength of nanocrystalline graphene10.1038/ncomms10546 ↗
69. Across the border10.1038/nmat2862 ↗
70. Molecular mechanics of polycrystalline graphene with enhanced fracture toughness10.1016/j.eml.2015.01.007 ↗
71. Reduced wear and friction enabled by graphene layers on sliding steel surfaces in dry nitrogen10.1016/j.carbon.2013.03.006 ↗
72. Chemical vapor deposition-grown graphene: the thinnest solid lubricant10.1021/nn2011865 ↗