Indentation residual stresses in soda-lime and borosilicate glasses
Source abstract
Abstract
Abstract Residual stress measurements by fluorescence microscopy is a well-established technique which uses the R1 and/or R2 fluorescence peaks of Cr+3 ions in Al2O3. These peaks are sensitive to the distortion of the lattice and their position changes if the crystal is stressed. Borosilicate (BS) and soda-lime (SL) composites with 10 vol% Al2O3 were produced mixing the glass and alumina powders, uniaxially compressed and sintered at high temperature. Surface morphology and microstructure were characterized by optical and scanning electron microscopies. The porosity obtained was
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced ceramic materials synthesis · Glass properties and applications · High-Temperature Coating Behaviors
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (43)
Show source-provided references
1. A critical evaluation of indentation techniques for measuring fracture toughness: I, direct crack measurements10.1111/j.1151-2916.1981.tb10320.x ↗
2. Evaluation of KIc of brittle solids by the indentation method with low crack-to-indent ratios10.1007/BF00724706 ↗
3. Indentation-induced crack interaction in alumina ceramics10.1080/01418619608239724 ↗
4. Hardness properties and microscopic investigation of crack–crystal interaction in SiO2–MgO–Al2O3–K2O–B2O3–F glass ceramic system10.1007/s10856-009-3853-7 ↗
5. On the Vickers indentation fracture toughness test10.1111/j.1551-2916.2006.01482.x ↗
6. The response of solids to elastic/plastic indentation. I. Stresses and residual stresses10.1063/1.329930 ↗
7. Elastic stress fields caused by indenting brittle materials10.1080/01418618208236917 ↗
8. Direct observation and analysis of indentation cracking in glasses and ceramics10.1111/j.1151-2916.1990.tb05119.x ↗
9. An analytical expression for the stress field around an elastoplastic indentation/contact10.1016/j.actamat.2006.12.030 ↗
10. A quantitative analysis for the stress field around an elastoplastic indentation/contact10.1557/jmr.2009.0097 ↗
11. Internal residual stresses in partially crystallized photo-thermo-refractive glass10.1111/j.1551-2916.2010.04372.x ↗
12. Quantitative optical fluorescence microprobe measurements of stresses around indentations in Al2O3 and Al2O3/SiC nanocomposites: the influence of depth resolution and specimen translucency10.1016/j.actamat.2010.12.055 ↗
13. Cr3+ microspectroscopy measurements and modelling of local variations in surface grinding stresses in polycrystalline alumina10.1016/j.jeurceramsoc.2010.04.016 ↗
14. Thermal residual stresses and their toughening effect in Al2O3 platelet reinforced glass10.1016/S1359-6454(99)00177-9 ↗
15. Stress measurement in single-crystal and polycrystalline ceramics using their optical fluorescence10.1111/j.1151-2916.1993.tb03922.x ↗
16. Luminescence sensing of stress in Ti/Al2O3 fiber reinforced composites10.1016/0956-7151(94)00281-L ↗
17. Vickers indentations in glass—I. Residual stress fields and iso-stress contour maps10.1016/0956-7151(94)00392-U ↗
18. Internal residual stress measurements in a bioactive glass-ceramic using vickers indentation10.1111/j.1551-2916.2010.03717.x ↗
19. Internal residual stresses in sintered and commercial low expansion Li2O–Al2O3–SiO2 glass–ceramics10.1111/j.1551-2916.2010.04220.x ↗
20. Internal residual stresses in glass-ceramics: a review10.1016/j.jnoncrysol.2012.01.040 ↗
21. Experimental measurement of residual stress field around sharp indentation in glass10.1111/j.1151-2916.1994.tb07025.x ↗
22. Internal residual stress measurements in a bioactive glass–ceramic using Vickers indentation10.1111/j.1551-2916.2010.03717.x ↗
23. Poisson's ratio and modern materials10.1038/nmat3134 ↗
24. Measurement of residual stresses in sapphire fiber composites using optical fluorescence10.1016/0956-7151(93)90202-4 ↗
25. Confocal fluorescence microscopy in alumina-based ceramics: where does the signal come from?10.1016/j.jeurceramsoc.2009.08.020 ↗
26. High temperature microhardness of soda-lime glass10.1016/j.jnoncrysol.2004.08.138 ↗
27. Alumina as a devitrification inhibitor during sintering of borosilicate glass powders10.1111/j.1151-2916.1993.tb08325.x ↗
28. Effect of temperature on hardness and indentation cracking of fused silica10.1016/j.jnoncrysol.2006.02.113 ↗
29. Effect of high-temperature ambience during sharp indentation on the residual contact site properties10.1088/0022-3727/41/7/074025 ↗
30. A critical evaluation of indentation techniques for measuring fracture toughness: I, direct crack measurements10.1111/j.1151-2916.1981.tb10320.x ↗
31. Residual thermal stresses in ceramic composites. Part I: with ellipsoidal inclusions10.1016/0921-5093(96)10176-3 ↗
32. Thermoelastic stress in the semi-infinite solid
33. Quantitative optical fluorescence microprobe measurements of stresses around indentations in Al2O3 and Al2O3/SiC nanocomposites: The influence of depth resolution and specimen translucency10.1016/j.actamat.2010.12.055 ↗
34. Direct observation and analysis of indentation cracking in glasses and ceramics10.1111/j.1151-2916.1990.tb05119.x ↗
35. Quantitative evaluation of indentation-induced densification in glass10.1557/jmr.2005.0418 ↗
36. Internal stresses in ceramics10.1111/j.1151-2916.1961.tb15475.x ↗
37. Vickers indentations in glass–I. Residual stress fields and iso-stress contour maps10.1016/0956-7151(94)00392-U ↗
38. An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments10.1557/JMR.1992.1564 ↗
39. Hardness and toughness of sodium borosilicate glasses via Vickers's indentations10.1016/j.jnoncrysol.2015.02.005 ↗
40. Densification and flow phenomena of glass in indentation experiments10.1016/0022-3093(70)90188-2 ↗
41. Indentation deformation/fracture of normal and anomalous glasses10.1016/0022-3093(79)90154-6 ↗
42. Quantitative evaluation of indentation-induced densification in glass10.1557/jmr.2005.0418 ↗
43. Indentation behavior of soda-lime silica glass, fused silica, and single-crystal quartz at liquid nitrogen temperature10.1111/j.1151-2916.1995.tb08241.x ↗