Correlation between the crystallized structure of Mg67Zn28Ca5 amorphous alloy and the corrosion behavior in simulated body fluid
Source abstract
Abstract
Abstract The corrosion behavior of Mg-Zn-Ca amorphous alloys in simulated body fluid is of academic and engineering interests since they are potential biomaterials. The influence of the crystallized structure of the Mg67Zn28Ca5 amorphous alloy on the corrosion behavior in simulated body fluid (SBF) is investigated. The different crystallized structures were obtained by heating the amorphous sample to temperatures of 100 °C~300 °C. The results reveal that the amorphous Mg67Zn28Ca5 alloy shows better corrosion resistance in SBF than partially crystallized samples, and homogeneous chemical corrosion occurs on the surface of the amorphous alloy. In contrast, inhomogeneous galvanic corrosion occurs on the surfaces of the partially crystallized Mg67Zn28Ca5 sample; and the corroded surface becomes more rugged with increasing the crystallized temperature. The corrosion rate (Vcorr) of the Mg67Zn28Ca5 amorphous alloy in SBF shows a nearly linear relation with the crystallized volume fraction (CVF), i.e., Vcorr= −8.38+96.23CVF, indicating that its corrosion behavior is readily tuned by crystallization.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Magnesium Alloys: Properties and Applications · Hydrogen Storage and Materials · Aluminum Alloys Composites Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (40)
Show source-provided references
1. Magnesiumanditsalloysasorthopedicbiomaterials: a review10.1016/j.biomaterials.2005.10.003 ↗
2. New interests in magnesium
3. Characterization of MgNd2 alloy for potential applications in bioresorbable implantable devices10.1016/j.actbio.2012.05.024 ↗
4. A new, toxic element-free Mg-based metallic glass for biomedical applications10.1016/j.jnoncrysol.2017.11.024 ↗
5. The microstructure and corrosion resistance of biological Mg–Zn–Ca alloy processed by high-pressure torsion and subsequently annealing10.1557/jmr.2017.55 ↗
6. The development of binary Mg-Ca alloys for use as biodegradable materials within bone10.1016/j.biomaterials.2007.12.021 ↗
7. Recentadvancesinbulkmetallicglassesforbiomedicalapplications10.1016/j.actbio.2016.03.047 ↗
8. Microstructure and corrosion properties of as sub-rapid solidification Mg-Zn-Y-Nd alloy in dynamic simulated body fluid for vascular stent application
9. Chemistry and biochemistry of magnesium10.1016/S0098-2997(02)00087-0 ↗
10. Influence of microstructure on the corrosion of diecast AZ91D10.1016/S0010-938X(98)00121-8 ↗
11. The effect of heat treatment on the corrosion behavior of amorphous Mg–Ni–Nd Alloys10.1557/JMR.1999.0220 ↗
12. Corrosion behavior of MgZnCa bulk amorphous alloys fabricated by spark plasma sintering10.1007/s40195-016-0451-9 ↗
13. Microstructure, mechanical and corrosion properties of Mg–Nd–Zn–Sr–Zr alloy as a biodegradable material10.1179/1743284714Y.0000000661 ↗
14. First successful implantation of a biodegradable metal stent into the left pulmonary artery of a preterm baby
15. Revolutionizing orthopaedic biomaterials: the potential of biodegradable and bioresorbable magnesium-based materials for functional tissue engineering10.1016/j.jbiomech.2013.12.003 ↗
16. Biodegradable magnesium scaffolds: part 1: appropriate inflammatory response10.1002/jbm.a.31170 ↗
17. Degradable biomaterials based on magnesium corrosion10.1016/j.cossms.2009.04.001 ↗
18. MgZnCa glasses without clinically observable hydrogen evolution for biodegradable implants10.1038/nmat2542 ↗
19. Effects of Zn on microstructure, mechanical properties and corrosion behavior of Mg–Zn alloys10.1016/j.msec.2012.07.042 ↗
20. Structural relaxation, glass-forming ability and mechanical properties of Mg–Cu–Ni–Gd alloys10.1016/j.jnoncrysol.2005.01.061 ↗
21. Microstructure, mechanical properties and bio-corrosion properties of Mg–Zn–Mn–Ca alloy for biomedical application
22. Microstructure, mechanical properties and bio-corrosion properties of Mg-Si(-Ca, Zn) alloy for biomedical application10.1016/j.actbio.2009.11.024 ↗
23. Biocorrosion properties of as-extruded Mg–Nd–Zn–Zr alloy compared with commercial AZ31 and WE43 alloys10.1016/j.matlet.2011.08.079 ↗
24. Critical size and strength of the best bulk metallic glass former in the Mg–Cu–Gd ternary system10.1016/j.scriptamat.2006.09.023 ↗
25. Biodegradable Mg–Zn–Ca–Sr bulk metallic glasses with enhanced corrosion performance for biomedical applications10.1016/j.matdes.2014.10.085 ↗
26. In vitro degradation and mechanical integrity of Mg-Zn-Ca alloy coated with Ca-deficient hydroxyapatite by the pulse electrodeposition process10.1016/j.actbio.2009.12.009 ↗
27. Tribocorrosion behaviors of a biodegradable Mg65Zn30Ca5 bulk metallic glass for potential biomedical implant applications10.1016/j.jallcom.2018.02.138 ↗
28. Mg-Zn-Ca amorphous alloys for application as temporary implant: effect of Zn content on the mechanical and corrosion properties10.1016/j.matdes.2016.07.148 ↗
29. EffectofSronthemicrostructureandbiodegradablebehaviorofMg–Zn–Ca-Mnalloysforimplant application10.1016/j.matdes.2018.04.062 ↗
30. Improvement of mechanical properties in MgCuYNdAg bulk metallic glasses with adding Moparticles10.1016/j.jallcom.2010.04.066 ↗
31. Dispersion toughening of Mg-based bulk metallic glass reinforced with porous Mo particles10.1016/j.intermet.2009.09.006 ↗
32. Effects of characteristics of Mo dispersions on the plasticity of Mg-based bulk metallic glass composites10.1016/j.intermet.2011.01.013 ↗
33. High specific strength Mg-based bulk metallic glass matrix composite highly ductilized by Ti dispersoid10.1016/j.msea.2008.04.039 ↗
34. Enhanced mechanical properties and corrosion resistance of a Mg–Zn–Ca bulk metallic glass composite byFe particle addition10.1016/j.matlet.2012.09.098 ↗
35. Degradation behavior and mechanical strength of Mg-Zn-Ca bulk metallic glass composites with Ti particles as biodegradable materials10.1016/j.jallcom.2017.01.010 ↗
36. In vitro corrosion behaviors of Mg67Zn28Ca5 alloy: from amorphous to crystalline10.1016/j.matchemphys.2012.03.116 ↗
37. How useful is SBF in predicting in vivo bone bioactivity?10.1016/j.biomaterials.2006.01.017 ↗
38. Control of biodegradation of biocompatable magnesium alloys10.1016/j.corsci.2007.01.001 ↗
39. Microstructure and mechanical properties of bulk Mg–Zn–Ca amorphous alloys and amorphous matrix composites10.1016/j.msea.2007.10.027 ↗
40. Corrosion of, and cellular responses to Mg-Zn-Ca bulk metallic glasses10.1016/j.biomaterials.2009.11.015 ↗