Removal of hydroxyl groups to enhance the near- and mid-infrared emission of heavy-metal oxyfluoride glasses by chemical clarification : Nitrate ions
Source abstract
Abstract
Abstract The near- and mid-infrared emission of rare-earth-doped glasses has many applications in civilian and military fields, but the overlapping vibrations of soluble hydroxyl groups in the glass matrix restrict the emission intensity. To reduce the quenching effects of the hydroxyl groups on the near- and mid-infrared emission, nitrate ions as a chemical clarificant, which are added to the raw materials for the preparation of heavy-metal oxyfluorotellurite glasses, can decompose during the melting process and release a large amount of gases to remove OH− from the molten glass. The results reveal the emission intensity is noticeably enhanced and the absorption coefficient of OH− is substantially reduced. Judd–Ofelt analysis and related calculations demonstrate the J-O parameter Ω2 decreases and Ω4 increases slightly with the decrease of OH−content, and, at the same time, the stimulated absorption and emission cross sections also increase when the amount of nitrate is within a certain range. Especially, the intensity of the mid-infrared emission near 3 µm upon addition of 0.6 mol% Pb(NO3)2 is enhanced severalfold compared with that without nitrate ions.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Glass properties and applications · Luminescence Properties of Advanced Materials · Solid State Laser Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (30)
Show source-provided references
1. Mid-infrared laser applications in medicine and biology10.1098/rsta.2000.0747 ↗
2. Mid infrared lasers for remote sensing applications10.1016/j.jlumin.2015.03.004 ↗
3. Mid-infrared polarization spectroscopy: a tool for in situ measurements of toxic gases in smoke-laden environments10.1002/fam.1071 ↗
4. Advances in mid-infrared fiber lasers
5. Towards the clarity limit in optical fibre10.1038/35005034 ↗
6. Effect of processing on removal of hydroxyl absorption bands in Li2O-CaO-Al2O3-GeO2 glass10.1143/JJAP.33.6277 ↗
7. Lead-germanate glasses and fibers: a practical alternative to tellurite for nonlinear fiber applications10.1364/OME.3.001488 ↗
8. Management of OH absorption in tellurite optical fibers and related supercontinuum generation10.1016/j.optmat.2013.04.012 ↗
9. Enhanced 2.7 μm emission from Er3+ doped oxyfluoride tellurite glasses for a diode-pump mid-infrared laser
10. J.H. Campbell, T.I. Suratwala, C.B. Thorsness, J.S. Hayden, A.J. Thorne, J.M. Cimino, A.J. Marker Ⅲ, K. Takeuchi, M. Smolley, G.F. Ficini-Dorn, Continuous melting of phosphate laser glasses, J. Non-Cryst. Sol., 263&264 (2000) 342–357.10.1016/S0022-3093(99)00675-4 ↗
11. Reduction of OH- ions in tellurite glasses using chlorine and oxygen gases10.1557/jmr.2013.341 ↗
12. Self-limited crystallization-mediated removal of hydroxyl in glass10.1111/jace.14998 ↗
13. Advances in methods of purification and dispersion measurement applicable to tellurite-based glasses,Opt10.1364/OME.6.001079 ↗
14. Improvement of fluorescence lifetime from Er-doped sol-gel silica glass by dehydration in CCl410.1023/B:JSST.0000028176.72115.9f ↗
15. Fluorogermanate glass with reduced content of OH-groups for infrared fiber optics10.1016/j.jnoncrysol.2009.04.069 ↗
16. Removal of hydroxyl groups from Er3+/Yb3+codoped flurotellurite glasses10.1016/j.materresbull.2017.05.020 ↗
17. Thermally stable mid-infrared fluorotellurite glass with low OH content10.1016/j.jnoncrysol.2014.10.006 ↗
18. Halo-tellurite glass fiber with low OH content for 2-5 µm mid-infrared nonlinear applications10.1364/OE.21.018949 ↗
19. Removal of hydroxyl routes enhancing 2.85 μm mid-infrared luminescence in oxyfluorotellurite glass with high ZnF2 content10.1016/j.jnoncrysol.2018.07.032 ↗
20. Fabrication and characterization of a water-free mid-infrared fluorotellurite glass10.1364/OL.36.000740 ↗
21. Strucuture and infrared emission of Ho3+/Yb3+ co-doped TeO2-ZnO-ZnX2 (X = F, Cl, Br) glasses
22. Vibrational spectroscopic studies of some lead silicate glasses10.1016/0022-3093(78)90150-3 ↗
23. Microstructure and crystallization properties of TeO2-PbF2 glasses10.1002/jrs.2119 ↗
24. Hydroxyl groups in erbium-doped germanotellurite glasses10.1016/S0022-3093(00)00429-4 ↗
25. Optical properties of Nd3+ in tellurite and phosphotellurite glasses10.1063/1.329034 ↗
26. 1.53 mm luminescence properties of Er3+-doped K–Sr–Al phosphate glasses10.1016/j.ceramint.2014.12.162 ↗
27. Broadband 1.5-mm emission of high erbium-doped Bi2O3-B2O3-Ga2O3 glasses10.1016/j.ssc.2010.03.031 ↗
28. Facile preparation of plasmon enhanced near-infrared photoluminescence of Er3+-doped Bi2O3-B2O3-SiO2 glass for optical fiber amplifier10.1016/j.jlumin.2018.10.026 ↗
29. Spectroscopic properties and energy tranfer parameters of Er3+-doped fluorozirconate and oxyfluoroaluminate glasses10.1038/srep05053 ↗
30. Spectroscopic properties of Er3+-doped fluorotellurite glasses10.1016/j.optmat.2012.09.022 ↗