A nanoindentation study of Ti-based high entropy bulk metallic glasses at elevated temperatures
Source abstract
Abstract
Abstract Nanoindentation was used to explore the mechanical properties of high entropy bulk metallic glasses (HE-BMGs) from room to elevated temperatures. Two Ti-based HE-BMGs and two conventional counterparts were investigated. Below the glass transition temperature, softening is observed for conventional BMGs with increasing temperature, whereas hardness keeps almost unchanged for HE-BMGs. The resistance to thermal softening might originate from the highly stable high entropy structure, which retards atomic diffusion and rearrangement for shear transformation. Above the glass transition temperature, HE-BMGs show quite low hardness and pronounced creep deformation, suggesting that high entropy may facilitate fast diffusion in the viscous flow.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metallic Glasses and Amorphous Alloys · Material Dynamics and Properties · Phase-change materials and chalcogenides
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (33)
Show source-provided references
1. Deformation of metallic glasses: recent developments in theory, simulations, and experiments10.1016/j.actamat.2016.01.049 ↗
2. Enhancing fatigue wear resistance of a bulk metallic glass via introducing phase separation: a micro-impact test analysis
3. Glass formation, production and superior properties of Zr-based thin film metallic glasses (TFMGs): a status review10.1016/j.jnoncrysol.2019.119753 ↗
4. Investigation into nanoscratching mechanical performance of metallic glass multilayers with improved nano-tribological properties10.1016/j.jallcom.2018.10.270 ↗
5. Influence of cyclic loading on the structure and double-stage structure relaxation behavior of a Zr-Cu-Fe-Al metallic glass10.1016/j.msea.2018.11.031 ↗
6. Identifying the significance of sn addition on the tribological performance of Ti-based bulk metallic glass composites10.1016/j.jallcom.2018.11.262 ↗
7. Effect of Nb-C addition on the microstructure and mechanical properties of CoCrFeMnNi high entropy alloys during homogenisation10.1016/j.msea.2019.03.057 ↗
8. High-entropy metallic glasses
9. High thermal stability and sluggish crystallization kinetics of high-entropy bulk metallic glasses
10. Mechanical properties of Ti16.7Zr16.7Hf16.7Cu16. 7Ni16.7Be16.7 high-entropy bulk metallic glass10.1016/j.jnoncrysol.2016.08.022 ↗
11. Identifying the origin of strain rate sensitivity in a high entropy bulk metallic glass10.1016/j.scriptamat.2019.02.002 ↗
12. Nanoindentation study on the room temperature creep characteristics of a senary Ti16.7Zr16.7Hf16.7Cu16.7Ni16.7Be16.7 high entropy bulk metallic glass10.1016/j.jnoncrysol.2017.04.041 ↗
13. High entropy TiZr20Cu20Ni20Be20 bulk metallic glass10.1016/j.jnoncrysol.2013.01.022 ↗
14. Development and crystallization kinetics of novel near-equiatomic high-entropy bulk metallic glasses10.1016/j.jallcom.2018.11.299 ↗
15. Utilization of high entropy alloy characteristics in Er-Gd-Y-Al-Co high entropy bulk metallic glass10.1016/j.actamat.2018.06.024 ↗
16. Effect of compositional tailoring on the glass-forming ability and mechanical properties of TiZr-based bulk metallic glass matrix composites10.1016/j.msea.2014.06.041 ↗
17. Effect of strain rate on compressive behavior of Ti45Zr16Ni9Cu10Be20 bulk metallic glass10.1016/j.msea.2006.02.405 ↗
18. High temperature indentation based property measurements of IN-61710.1016/j.ijplas.2017.05.007 ↗
19. Anelastic to plastic transition in metallic glass-forming liquids
20. Unusual relation between glass-forming ability and thermal stability of high-entropy bulk metallic glasses10.1080/21663831.2018.1482839 ↗
21. Activation volume and energy of bulk metallic glasses determined by nanoindentation10.1016/j.matdes.2018.05.051 ↗
22. Deformation behavior and indentation size effect of Au49Ag5.5Pd2.3Cu26.9Si16.3 bulk metallic glass at elevated temperatures10.1016/j.intermet.2008.07.018 ↗
23. Improvement of intrinsic plasticity and strength of Zr55Cu30Ni5Al10 metallic glass by tuning the glass transition temperature.
24. Manipulation of thermal and mechanical stability by addition of multiple equiatomic rare-earth elements in Al-TM-RE metallic glasses10.1016/j.intermet.2017.07.019 ↗
25. The correlation between weakest configurations and yield strength of Zr-based metallic glasses10.1016/j.jnoncrysol.2017.04.021 ↗
26. A structural model for metallic glasses
27. Susceptibility of shear banding to chemical short-range order in metallic glasses10.1016/j.scriptamat.2018.11.001 ↗
28. Thermal stability and mechanical strength of bulk glassy Ni-Nb-Ti-Zr alloys10.2320/matertrans.43.1952 ↗
29. Room temperature nanoindentation creep behavior of TiZrHfBeCu(Ni) high entropy bulk metallic glasses10.1016/j.msea.2017.01.094 ↗
30. On the spherical nanoindentation creep of metallic glassy thin films at room temperature10.1016/j.msea.2017.01.018 ↗
31. An investigation of the creep processes in tin and aluminum using a depth-sensing indentation technique
32. Extraordinary creep relaxation time in a La-based metallic glass10.1007/s10853-017-1725-y ↗
33. On the temperature dependence of cooperative relaxation properties in glass-forming liquids10.1063/1.1696442 ↗