Evaluation of demolding force for glass-imprint process
Source abstract
Abstract
Demolding behavior of oxide glasses from molds was experimentally analyzed using a specially developed molding set up equipped with highly sensitive load cell and servomotor. The demolding point and the demolding force were apt to increase with the tensile force applied to the pressing axis, and also to the cooling rate. Especially the demolding force was strongly affected by the cooling rate when the demolding point was located near the glass transition temperature region. These results offer a useful direction for highly accurate glass-molding and glass-imprint processes.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Nanofabrication and Lithography Techniques · Advanced Surface Polishing Techniques · Advancements in Photolithography Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (23)
Show source-provided references
1. Fabrication of antireflective subwavelength structure on spherical glass surface using imprinting process10.1143/APEX.3.112501 ↗
2. Surface-relief gratings with high spatial frequency fabricated using direct glass imprinting process10.1364/OL.33.000428 ↗
3. Imprinted optical pattern of low-softening phosphate glass10.1364/OL.32.002750 ↗
4. Finite element analysis of TV panel glass during cooling10.1081/AMP-200035302 ↗
5. Numerical modeling of viscoelastic stress relaxation during glass lens forming process10.1111/j.1551-2916.2005.00114.x ↗
6. Wettability of NiAl, Ni–Al–N, Ti–B–C, and Ti–B–C–N films by glass at high temperatures10.1016/S0257-8972(00)00877-X ↗
7. Wetting, interfacial interactions and sticking in glass/steel systems10.1016/j.msea.2004.05.045 ↗
8. Reactions and bonding of sodium disilicate glass with chromium10.1111/j.1151-2916.1985.tb15245.x ↗
9. Glass in contact with mould materials for container production
10. Investigation of the adherence of glass to metals and alloys10.1111/j.1151-2916.1951.tb13485.x ↗
11. Influence of glass/mould interfaces on sticking
12. Investigation of the effects of process parameters on the glass-to-mold sticking force during precision glass molding10.1016/j.surfcoat.2010.06.049 ↗
13. Mechanism dominating the generation of sink-Mark and residual stress in a press-formed glassware from a thermal engineering viewpoint
14. Investigations on glass-to-mold sticking in the hot forming process10.1016/j.jnoncrysol.2007.02.095 ↗
15. Surface adhesion and demolding force dependence on resist composition in ultraviolet nanoimprint lithography10.1016/j.apsusc.2011.09.090 ↗
16. Impact of substrate deformation on demolding force for thermal imprint process10.1116/1.3517537 ↗
17. Measurement of demolding forces in full wafer thermal nanoimprint10.1016/j.mee.2008.01.086 ↗
18. Young's modulus and compositional parameters of oxide glasses10.1111/j.1151-2916.1999.tb02272.x ↗
19. Force of adhesion between solid-surfaces in contact10.1063/1.90551 ↗
20. Theory of the parallel plate viscometer10.1088/0508-3443/11/2/310 ↗
21. A versatile parallel-plate viscometer for glass viscosity measurements to 1000 degrees C
22. Relaxation in liquids, polymers and plastic crystals - strong fragile patterns and problems10.1016/0022-3093(91)90266-9 ↗
23. Temperature dependence of the high-frequency viscoelastic behavior of a soda-lime-silica glass10.1111/j.1151-2916.1998.tb02479.x ↗