Fracture toughness evaluation of precursor-derived Si–C–N ceramics using the crack opening displacement approach

Abstract Difficulties in the fabrication of representative test specimens and in the application of suitable test procedures e.g., in the measurement of the test parameters viz ., load, crack length etc., have so far limited the intrinsic fracture mechanical characterization of the precursor-derived ceramics (PDC). The present work reports the evaluation of the crack tip toughness ( K I 0 ) of Si–C–N ceramics, using the novel crack opening displacement (COD) approach. The fully dense PDC test specimens synthesized from a poly(ureamethylvinyl)silazane precursor covered material structures ranging from partly organic amorphous to inorganic nano-crystalline states. Critically loaded cracks were achieved using either a special loading fixture or with Vickers indentation. Crack tip CODs were measured with the atomic force microscopy (AFM). Fractography of the fracture surfaces were performed using topographic, frictional and phase contrast AFM. The measured K I 0 values ranged from 0.6 to 1.2 MPa m 1/2 . The net change in crack resistance was affected by the stripping of OFC-hydrogen atoms in the amorphous materials and by the segregated turbostratic graphite phase in the phase-separated materials. Nano-scale crack deflection observed even in the amorphous materials indicated the presence of structural and compositional inhomogeneities within the amorphous network.