Effect of kaolin addition on the sinter-crystallisation kinetics of compacts of a crystallising frit
Source abstract
Abstract
Non-isothermal techniques were used to study the sintering and crystallisation kinetics of an anorthoclase- and diopside-devitrifying frit and mixtures of this frit with a commercial kaolin. Raising kaolin content was verified to delay sintering and crystallisation and to increase the degree to which both processes overlapped, which decreased the sinterability of the material. In addition, raising kaolin content lowered the resulting diopside content, which cancelled out for the mixture with 16 wt% kaolin, while the shape, size, and composition of the anorthoclase crystals also changed. The kinetic parameters of the sinter-crystallisation processes were determined, and a model was developed that appropriately describes sintering kinetics. The model assumes the process develops in two parallel, partly overlapping stages, each of which can be described by the Kohlrausch–Williams–Watts (KWW) relaxation function.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Recycling and utilization of industrial and municipal waste in materials production · Bone Tissue Engineering Materials · Thermal and Kinetic Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (36)
Show source-provided references
1. Influence of particle size distribution on sinterability, crystallisation kinetics and flexural strength of wollastonite glass-ceramics from waste glass and fly ash10.1016/j.matchemphys.2014.08.013 ↗
2. On the sinterability of crystallizing glass powders10.1016/j.jnoncrysol.2008.06.006 ↗
3. The influence of grain size on the overall kinetics of surface-induced glass crystallization10.1007/BF02057238 ↗
4. Effect of MgO addition on sinterability, crystallization kinetics, and flexural strength of glass-ceramics from waste materials10.1016/j.ceramint.2015.10.142 ↗
5. Sinter-crystallization in the diopside-albite system Part II. Kinetics of crystallization and sintering10.1016/j.jeurceramsoc.2005.12.007 ↗
6. The kinetics of surface induced sinter-crystallization and the formation of glass-ceramic materials10.1023/A:1004400508154 ↗
7. Sinter-crystallization in the diopside-albite system Part I. Formation of induced crystallization porosity10.1016/j.jeurceramsoc.2005.06.042 ↗
8. Induced crystallization porosity and properties of sintered diopside and wollastonite glass-ceramics10.1016/j.jeurceramsoc.2007.08.001 ↗
9. Sinter-crystallisation kinetics of a SiO2-Al2O3-CaO-MgO-SrO glass-ceramic glaze10.1016/j.jnoncrysol.2020.119900 ↗
10. Effect of particle size distribution on the sinter-crystallisation kinetics of a SiO2-Al2O3-CaO-MgO-SrO glass-ceramic glaze10.1016/j.jnoncrysol.2020.120148 ↗
11. Effect of particle size distribution on the evolution of porous, microstructural, and dimensional characteristics during sinter-crystallisation of a glass-ceramic glaze10.1016/j.jnoncrysol.2021.121093 ↗
12. Effect of the kaolin proportion contained in the glaze layer on glaze behaviour in firing
13. Kinetics of the thermal dehydration of clays. Part IV. Interpretation of the differential thermal analysis of the clay minerals
14. Kinetics of phase change. I General Theory10.1063/1.1750380 ↗
15. Kinetics of phase change. II Transformation–time relations for random distribution of nuclei10.1063/1.1750631 ↗
16. Calculation of the Avrami parameters for heterogeneous solid-state reactions using a modification of the Kissinger method10.1007/BF01912301 ↗
17. Method of determining activation deterioration constant of electrical insulating materials
18. Densification of irregular polydispersed glass particles described as a complex relaxation process
19. Non-isothermal sinter-crystallisation of satin glazes: A kinetic model10.1016/j.ceramint.2018.01.208 ↗
20. Viscous flow sintering in glass matrix composites with rigid inclusions10.29272/cmt.2018.0003 ↗
21. Non-isothermal sintering of powdered vitrified composites. A kinetic model10.1016/j.matlet.2018.10.089 ↗
22. Blasco · 2017
23. Kinetics of viscous flow sintering of glass-zircon composites. Effect of zircon volume fraction and particle size distribution10.1016/j.oceram.2022.100229 ↗
24. Kinetic model for the isothermal sintering of flow porosity floor tiles10.1016/0169-1317(93)90040-8 ↗
25. A modified method for kinetic analysis of thermoanalytical data10.1007/BF01909401 ↗
26. Kinetics of non-isothermal crystallization10.1016/0032-3861(71)90041-3 ↗
27. Reed · 2008
28. High-temperature viscosity of many-component glass melts10.1016/j.jnoncrysol.2016.01.007 ↗
29. Viscosity of many-component glasses10.1016/j.jnoncrysol.2009.03.005 ↗
30. High-temperature viscosity of commercial glasses
31. Glass viscosity as a function of temperature and composition: a model based on Adam–Gibbs equation10.1016/j.jnoncrysol.2008.02.019 ↗
32. On he phenomenon of variable activation energy for condensed phase reactions10.1039/b004279j ↗
33. Computational aspects of kinetic analysis: Part A: The ICTAC kinetics project-data, methods and results10.1016/S0040-6031(00)00443-3 ↗
34. Sintering, crystallisation and biodegradation behaviour of Bioglasss-derived glass–ceramics10.1039/b616539g ↗
35. Non-isothermal sintering with concurrent crystallization of polydispersed soda–lime–silica glass beads10.1016/j.jnoncrysol.2003.08.077 ↗
36. Sintered glass-ceramics from municipal solid waste-incinerator fly ashes–part I: the influence of the heating rate on the sinter-crystallisation10.1016/S0955-2219(02)00210-8 ↗