Two-step post treatment to improve corrosion resistance and friction performance of Fe-based metallic glasses/crystalline dual-phase coatings
Source abstract
Abstract
Metallic glasses /crystalline dual-phase coatings tend to have better mechanical properties than metallic glasses coatings, but their corrosion resistance is often deteriorated by crystallization. In this paper, a novel sealing method specially applied to metallic glasses /crystalline dual-phase coatings was developed, that is, the ultrasonic-assisted pre-sealing, annealing plus post-impregnating integration sealing treatment. The structure and properties of the sealing coatings were investigated by SEM, EDS, XRD, potentiodynamic polarization, EIS, and friction experiments. It was found that the coating sealed by the method proposed in this paper had a more compact sealing structure, and has better corrosion resistance than the impregnation sealing coating in long-term corrosion experiments. After 40 days of immersion, the corrosion current density of the multistep integration sealing coating still maintained 15.63 μA·cm −2, which was much higher than that of the impregnation sealing coating. In addition, it also showed better friction resistance than the impregnation sealing coating.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metallic Glasses and Amorphous Alloys · High-Temperature Coating Behaviors · Corrosion Behavior and Inhibition
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (52)
Show source-provided references
1. Long term semiconducting and passive film properties of a novel dense FeCrMoCBY amorphous coating by atmospheric plasma spraying10.1016/j.apsusc.2019.143600 ↗
2. Wear behavior and corrosion properties of Fe-based thin film metallic glasses10.1016/j.jallcom.2015.07.256 ↗
3. High-temperature tribological property of Fe-based amorphous alloy coating10.1016/j.jnoncrysol.2021.121136 ↗
4. Box-behnken design to enhance the corrosion resistance of plasma sprayed Fe-based amorphous coating10.1016/j.rinp.2019.102708 ↗
5. Effect of feedstock particle sizes on wear resistance of plasma sprayed Fe-based amorphous coatings10.1016/j.surfcoat.2014.08.050 ↗
6. Stress induced crystallization of hydrogenated amorphous silicon10.1016/j.tsf.2008.10.114 ↗
7. Nanoscopic observations of stress-induced formation of graphitic nanocrystallites at amorphous carbon surfaces10.1016/j.carbon.2014.03.035 ↗
8. Dynamic mechanical behavior of (La0.7Ce0.3)65Al10Co25 bulk metallic glass: influence of the physical aging and heat treatment10.1016/j.jallcom.2021.159271 ↗
9. Rejuvenation of a naturally aged bulk metallic glass by elastostatic loading10.1016/j.msea.2021.140843 ↗
10. Effect of physical aging and cyclic loading on power-law creep of high-entropy metallic glass10.1016/j.jmst.2021.10.043 ↗
11. Effect of heat treatment on the microstructure and mechanical properties of Fe-based amorphous coatings10.1016/j.jallcom.2009.02.107 ↗
12. Effects of crystallization on the corrosion resistance of arc-sprayed FeBSiNb coatings10.1007/s11666-013-9990-z ↗
13. Influence of heat treatment on microstructure and mechanical properties of plasma sprayed FeCrMoCBY amorphous coatings10.1007/s11595-021-2469-8 ↗
14. Influence of heat treatment on microstructure and sliding wear of thermally sprayed Fe-based metallic glass coatings10.1007/s11249-012-9929-4 ↗
15. Fabrication of Fe-based amorphous composite coating by laser cladding10.1016/j.jnoncrysol.2022.121648 ↗
16. Amorphous Ni-P coating modified by laser remelting: the effect of remelted crystallization layer on microhardness and wear resistance10.1016/j.triboint.2022.107884 ↗
17. Effects of structural relaxation and crystallization on the corrosion resistance of an Fe-based amorphous coating10.1016/j.jnoncrysol.2020.120378 ↗
18. Effects of crystallization on the corrosion resistance of Fe-based amorphous coatings10.1016/j.corsci.2012.02.003 ↗
19. Effect of laser irradiation on high-temperature crystallization behavior, oxidation resistance, and corrosion performance evaluation of electrodeposited amorphous Ni-P coatings10.1016/j.jnoncrysol.2022.121647 ↗
20. Pitting initiation in Fe-based amorphous coatings10.1016/j.actamat.2012.04.005 ↗
21. Effect of porosity defects on the long-term corrosion behaviour of Fe-based amorphous alloy coated mild steel10.1016/j.corsci.2016.04.021 ↗
22. Enhanced corrosion resistance in Fe-based amorphous coatings through eliminating Cr-depleted zones10.1016/j.corsci.2018.03.005 ↗
23. Corrosion properties of amorphous, partially, and fully crystallized Fe68Cr8Mo4Nb4B16 alloy10.1016/j.jallcom.2020.154123 ↗
24. Crystallization behavior and corrosion resistance of Al86Ni10Zr4 amorphous alloy under different annealing treatment conditions10.1016/j.jnoncrysol.2022.121775 ↗
25. Amorphous coatings on tantalum formed by plasma electrolytic oxidation in aluminate electrolyte and high temperature crystallization treatment10.1016/j.surfcoat.2022.128171 ↗
26. Influence of sealing treatment on the corrosion behavior of HVAF sprayed Al-based amorphous/nanocrystalline coating10.1016/j.surfcoat.2018.08.086 ↗
27. Effect of sol-gel sealing treatment loaded with different cerium salts on the corrosion resistance of Fe-based amorphous coating10.1016/j.surfcoat.2019.04.011 ↗
28. Influence of sealing treatment on the corrosion resistance of Fe-based amorphous coatings in HCl solution10.1016/j.jallcom.2017.04.179 ↗
29. The optimization of microbial influenced corrosion resistance of HVOF sprayed nanostructured WC-10Co-4Cr coatings by ultrasound-assisted sealing10.1016/j.ultsonch.2020.105438 ↗
30. Electrochemical impedance spectroscopy study of the passive film for laser-beam-melted 17-4PH stainless steel10.1016/j.corsci.2021.109750 ↗
31. Electrochemical impedance spectroscopy of ceramic coatings on Ti–6Al–4V by micro-plasma oxidation10.1016/j.electacta.2004.12.001 ↗
32. Niobium addition enhancing the corrosion resistance of nanocrystalline Ti5Si3 coating in H2SO4 solution10.1016/j.actamat.2013.10.040 ↗
33. Electronic effects on protective mechanism of electropolymerized coatings based on N-substituted aniline derivatives for mild steel in saline solution10.1016/j.jiec.2021.11.004 ↗
34. Effect of pitting nucleation on critical pitting temperature of 316L stainless steel by nitric acid passivation10.1016/j.corsci.2014.11.018 ↗
35. Influence of temperature on the electrochemical and passivation behavior of 2507 super duplex stainless steel in simulated desulfurized flue gas condensates10.1016/j.corsci.2017.01.016 ↗
36. Effect of silicon on corrosion resistance of Ti–Si alloys10.1016/j.mseb.2010.09.006 ↗
37. Mechanistic insight into the role of amorphicity and porosity on determining the corrosion mitigation behavior of Fe-based amorphous/nanocrystalline coating10.1016/j.jallcom.2020.156624 ↗
38. Effect of porosity sealing treatments on the corrosion resistance of high-velocity oxy-fuel (HVOF)-sprayed Fe-based amorphous metallic coatings10.1016/j.surfcoat.2011.08.045 ↗
39. High-resolution transmission electron microscopy investigation of diffusion in metallic glass multilayer films
40. The effects of sealing on the mechanical properties of the plasma-sprayed alumina-titania coating10.1016/S0257-8972(00)01132-4 ↗
41. Sealing of thermal spray coatings by impregnation10.1007/s11666-999-0002-2 ↗
42. Influence of coating thickness on the impact damage mode in Fe-based amorphous coatings10.1016/j.surfcoat.2020.125650 ↗
43. The rate of ascent of liquids through granular media10.1039/tf9221700260 ↗
44. The dynamics of capillary flow10.1103/PhysRev.17.273 ↗
45. Capillary rise in porous media10.1016/S0378-4371(00)00460-X ↗
46. Electrochemical behaviour of Fe-based metallic glasses in acidic and neutral solutions10.1016/j.corsci.2012.05.025 ↗
47. What we have learned from studies on chemical properties of amorphous alloys?10.1016/j.apsusc.2010.12.142 ↗
48. Influence of composition and partial crystallization on corrosion resistance of amorphous Fe–M–B–Cu (M=Zr, Nb, Mo) alloys10.1016/S0022-3093(01)00386-6 ↗
49. First-principle study of the structural, electronic, and magnetic properties of amorphous Fe–B alloys10.1016/j.physb.2011.10.042 ↗
50. Study on microstructure and compressive properties of Fe-C-W-Cr-V-Nb coating with boron addition10.1016/j.jallcom.2022.163986 ↗
51. Multifunctional and robust composite coating with water repellency and self-healing against marine corrosion10.1016/j.jiec.2022.03.033 ↗
52. Fe@SiO2@(MnZn)Fe2O4 soft magnetic composites with enhanced permeability and low core loss for high-frequency applications10.1016/j.jallcom.2019.07.016 ↗