Simulation and non-linear optimization of Šesták-Berggren kinetics
Source abstract
Abstract
Abstract The effect of procedural conditions (density of points, initial value of conversion rate) on the accuracy of Sestak-Berggren (AC) simulations was studied. Newly developed software programmed in R-language and using the LSODA initial-value-problem-solver was used to simulate sets of AC kinetic data-sets with increasing precision. Evaluation of the kinetic data-sets was done using the benchmark commercial software, Thermokinetics (Netzsch), to consolidate uniformity of the data treatment. Whereas the points density used during the simulation had no effect on the resulting shape of the kinetic peak (and the corresponding kinetic description), the initial value of conversion rate was found to crucially influence the shape/parameters of the resulting kinetic peak. Importance of utilizing low enough initial values of conversion rate in the AC simulations dramatically increases for positively asymmetric kinetic peaks. Based on the present results, transferability of the kinetic parameters evaluated for the generic/experimental data by different softwares was discussed.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Thermal and Kinetic Analysis · Chemical Thermodynamics and Molecular Structure · Thermochemical Biomass Conversion Processes
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (52)
Show source-provided references
1. Šesták · 1984
2. Šesták · 2005
3. Šesták · 2011
4. Šesták · 2013
5. Šesták · 2017
6. R. Svoboda. Fraser-Suzuki function in kinetic analysis of complex solid-state reactions. Phys. Chem. Chem. Phys. (2020) – submitted.
7. Interpretation of crystallization kinetics results provided by DSC10.1016/j.tca.2011.10.005 ↗
8. A thermal analysis study of melt-quenched Zn5Se95 chalcogenide glass10.1016/j.jallcom.2019.152880 ↗
9. Devitrification study of a novel bioactive glass designed on the CaSiO3 – Ca3(PO4)2 – MgCa(SiO3)2 system
10. A spray freeze dried micropellet based formulation proof-of-concept for a yellow fever vaccine candidate10.1016/j.ejpb.2019.07.008 ↗
11. Crystallisation studies on site saturated lithium aluminosilicate (LAS) glass10.1016/j.tca.2019.178311 ↗
12. The crystallization kinetics studies of the two crystallization stages of As37.5Se37.5Ag25 glass using the model-fitting and model-free approaches10.1016/j.cjph.2019.02.033 ↗
13. Non-isothermal nano-crystallization kinetics in amorphous Ni55Nb35Si10 alloy10.1016/S1003-6326(19)64945-9 ↗
14. LCST phase transition kinetics of aqueous poly(N-isopropylacrylamide) solution10.1016/j.jtice.2018.07.045 ↗
15. Thermally induced microstructural transformations and anti-corrosion properties of Co70Fe5Si10B15 amorphous alloy10.1016/j.jnoncrysol.2018.08.017 ↗
16. On the determination of thermal degradation effects and detection techniques for thermoplastic composites obtained by automatic lamination10.1016/j.compositesa.2018.05.006 ↗
17. Kinetic analysis of crystallization in Li2O-Al2O3-SiO2-B2O3-BaO glass-ceramics10.1016/j.jnoncrysol.2018.04.004 ↗
18. In-depth physiochemical characterization and detailed thermo-kinetic study of biomass wastes to analyze its energy potential Benew
19. Thermal hazard and kinetic study of 5-(2-pyrimidyl) tetrazole based on deconvolution procedure10.1016/j.jlp.2019.05.015 ↗
20. Comparison between model-based and non-isothermal model-free computational procedures for prediction of conversion-time curves of calcium carbonate decomposition Thermochim
21. Combined kinetic analysis of multistep processes of thermal decomposition of polydimethylsiloxane silicone10.1016/j.polymer.2018.08.045 ↗
22. Synthesis, characterization and combined kinetic analysis of thermal decomposition of hydrotalcite (Mg6Al2(OH)16CO3·4H2O) Thermochim
23. Decomposition kinetics and thermolysis products analyses of energetic diaminotriazole-substituted tetrazine structures Thermochim
24. Mechanism and degradation kinetics of zinc complex containing isophthalato and 2,2′-dipyridylamine ligands under different atmospheres10.1016/j.solidstatesciences.2018.04.013 ↗
25. The thermal decomposition behavior and kinetics of epoxy resins cured with a novel phthalide-containing aromatic diamine10.1016/j.polymertesting.2018.02.012 ↗
26. Kinetic model analysis and mechanistic correlation of ammonia borane thermolysis under dynamic heating conditions10.1016/j.ijhydene.2018.04.124 ↗
27. Exploring enhanced reactivity of nanosized titanium toward oxidation Combust10.1016/j.combustflame.2018.01.011 ↗
28. Thermal degradation kinetic study of polystyrene/organophosphate composite Thermochim
29. In-depth physiochemical characterization and detailed thermo-kinetic study of biomass wastes to analyze its energy potential Renew
30. Kinetic modelling of waste wood devolatilization during pyrolysis based on thermogravimetric data and solar pyrolysis reactor performance10.1016/j.fuel.2019.116459 ↗
31. Comparative studies on the pyrolysis of cellulose, hemicellulose, and lignin based on combined kinetics10.1016/j.joei.2017.12.003 ↗
32. Optimization of oxygen chemisorption on the carbon surface based on kinetic analysis of isothermal thermogravimetry Thermochim
33. Pyrolysis mechanism and thermal degradation kinetics of poly(bisphenol A carbonate)-based polymers originating in waste electric and electronic equipment10.1016/j.jaap.2018.03.008 ↗
34. Curing kinetic of self-promoted alicyclic-based bisphthalonitrile monomer10.1016/j.tca.2019.178446 ↗
35. Kinetics of cross-linking processes of fast-curing polyurethane system10.1016/j.tca.2019.178435 ↗
36. Cure kinetics and thermal stability of maleimide modified epoxy TGIC/CPE powder coating system10.1016/j.tca.2015.09.004 ↗
37. The synthesis, curing kinetics, thermal properties and flame rertardancy of cyclotriphosphazene-containing multifunctional epoxy resin10.1016/j.tca.2019.178348 ↗
38. Comparative curing kinetics study of high char yield formaldehyde- and terephthalaldehyde-phenolic thermosets10.1016/j.tca.2018.06.013 ↗
39. Isoconversional kinetic study and accurate determination of lifetime properties for thermal and thermo-oxidative degradation processes of Aronia melanocarpa10.1016/j.ifset.2015.10.016 ↗
40. Thermal oxidation process of in-situ silicon carbide incorporated carbon aerogel, experimental and kinetic study10.1016/j.corsci.2018.07.022 ↗
41. Some methodological problems concerning the kinetic analysis of non-isothermal data for thermal and thermo-oxidative degradation of polymers and polymeric materials10.1016/j.polymdegradstab.2004.09.014 ↗
42. ICTAC Kinetics Committee recommendations for performing kinetic computations on thermal analysis data10.1016/j.tca.2011.03.034 ↗
43. The kinetic-analysis of nonisothermal data10.1016/0040-6031(92)85118-F ↗
44. Combined kinetic analysis of solid-state reactions: a powerful tool for the simultaneous determination of kinetic parameters and the kinetic model without previous assumptions on the reaction mechanism10.1021/jp064792g ↗
45. Automatic Selection of Methods for Solving Stiff and Nonstiff Systems of Ordinary Differential Equations10.1137/0904010 ↗
46. Solving Differential Equations in R: package de Solve10.18637/jss.v033.i09 ↗
47. Hindmarsh · 1983
48. Activation energy determination in case of independent complex kinetic processes10.3390/pr7100738 ↗
49. Importance of proper baseline identification for the subsequent kinetic analysis of derivative kinetic data, part 210.1007/s10973-017-6673-x ↗
50. Usage of masterplots in kinetic analysis of complex surface/volume crystallization processes in Se-Te glasses10.1016/j.jnoncrysol.2020.120068 ↗
51. Kinetic analysis using multivariate non-linear regression. I. basic concepts10.1023/A:1010167626551 ↗
52. A family of embedded Runge-Kutta formulae10.1016/0771-050X(80)90013-3 ↗