Effect of pressure on the structure of Ti75Al25 alloy during rapid-quenching process
Source abstract
Abstract
Abstract The structures of the Ti75Al25 alloy during rapid-quenching with and without external pressure are investigated by using molecular dynamic techniques. The amorphous phase can be obtained at the cooling rate 10.0 K/ps without pressure. The alloy is composed of crystal and amorphous phase at the cooling rate 0.1 and 1.0 K/ps without pressure, but the pure amorphous phase can be formed when the pressure exceeds the critical value. The critical pressure is about 20 and 30 GPa when the cooling rate is 0.1 and 1.0 K/ps, respectively. H-A indices analysis indicates that high pressure favors the formation of the ideal icosahedral structures in the amorphous Ti75Al25 alloy, and the content of 1551 bond-type can reach near to 50% when the pressure is 30 GPa. The amorphous state can be maintained if the external pressure is removed from the alloy step-by-step. The content of 1551 bond-type decreases with the deceasing of the pressure, but the 1541 and 1431 bond-types increase in this process.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metallic Glasses and Amorphous Alloys · Intermetallics and Advanced Alloy Properties · Quasicrystal Structures and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (29)
Show source-provided references
1. Atomic level stresses10.1016/j.pmatsci.2011.01.004 ↗
2. Interactions between mechanically generated defects and corrosion phenomena of Zr-based bulk metallic glasses10.1016/j.actamat.2011.12.044 ↗
3. Effects of flow defects on hypothetical ZrCu metallic glasses microstructure and plasticity: A molecular dynamics analysis10.1016/j.jallcom.2015.10.023 ↗
4. Enhancement of plasticity in Zr-Cu-Ni-Al-Ti bulk metallic glass by heterogeneous microstructure10.1016/j.jnoncrysol.2017.11.042 ↗
5. Improvement of glass-forming ability and phase separation in Cu–Ti-rich Cu–Ti–Zr–Ni–Si bulk metallic glasses10.1016/j.jallcom.2010.04.129 ↗
6. Effects of noble elements on the glass-forming ability, mechanical property, electrochemical behavior and tribocorrosion resistance of Ni- and Cu-free Zr-Al-Co bulk metallic glass10.1016/j.jallcom.2017.07.167 ↗
7. Crystallization kinetics of the Cu50Zr50 metallic glass under isothermal conditions10.1016/j.jssc.2016.09.023 ↗
8. First x-ray scattering studies on electro statically levitated metallic liquids: Demonstrated influence of local icosahedral order on the nucleation barrier10.1103/PhysRevLett.90.195504 ↗
9. Study of direct relationship between atomic structures and glass forming abilities of Cu100-xZrx liquids by molecular dynamics simulations
10. Glass formation in the Nb–Si binary system10.1016/j.jallcom.2010.03.034 ↗
11. Molecular-dynamics simulations of binary Pd-Si metal alloys: Glass formation, crystallisation and cluster properties10.1016/j.jnoncrysol.2018.02.016 ↗
12. Atomic structure of Pd81Si19 glassy alloy under high pressure10.1016/j.actamat.2014.08.051 ↗
13. Effect of high pressure solidification on tensile properties and strengthening mechanisms of Al-20Si10.1016/j.jallcom.2016.07.016 ↗
14. Microstructural characterization of high pressure die cast Mg-Zn-Al-RE alloys, J.F. Nie10.1016/j.matchar.2012.01.001 ↗
15. Enhancement of mechanical properties of Al–Mg alloy with a high Mg content solidified under high pressures10.1016/j.scriptamat.2010.11.049 ↗
16. New advance of alloy solidification process under high pressure
17. Molecular dynamics study of structural evolution of aluminum during rapid quenching under different pressures10.1016/j.physb.2011.06.083 ↗
18. Local order evolution of liquid Cu during glass transition under different pressures: a molecular dynamics study10.1016/j.physb.2012.10.003 ↗
19. Molecular dynamics study of pressure effect on glass formation and the crystallization in liquid CuNi alloy10.1016/j.commatsci.2006.03.008 ↗
20. Effect of high pressure on the formation and evolution of clusters during the rapid solidification of zirconium melts10.1016/j.commatsci.2017.07.040 ↗
21. Glass formation and icosahedral medium-range order in liquid Ti–Al alloys10.1016/j.commatsci.2014.08.023 ↗
22. Molecular dynamics study on formation and crystallization of Ti–Al amorphous alloys10.1016/S0921-5093(00)01506-9 ↗
23. Local order influences initiation of plastic flow in metallic glass: effects of alloy composition and sample cooling history10.1016/j.actamat.2008.07.011 ↗
24. Fast parallel algorithms for short-range molecular dynamics10.1006/jcph.1995.1039 ↗
25. Interatomic potentials for atomistic simulations of the Ti-Al system10.1103/PhysRevB.68.024102 ↗
26. Constant pressure molecular dynamics algorithms10.1063/1.467468 ↗
27. Molecular dynamics simulations at constant pressure and/or temperature10.1063/1.439486 ↗
28. Glass formation and local structure evolution in rapidly cooled Pd–Ni alloy melt under high pressure10.1016/j.physleta.2007.08.072 ↗
29. Crystallization of Pd40Cu30Ni10P20 bulk metallic glass with and without pressure10.1016/S1005-8850(07)60070-X ↗