Effect of hydration reaction on the wear behavior of Fe-based amorphous coating in different wear conditions
Source abstract
Abstract
This work utilizes detonation spraying to deposit Fe-based amorphous coating (Fe-based AC) with a highly dense microstructure on a carbon steel substrate. The electrochemical and wear performances were studied. The droplets show disk-like morphology with the highest circularity and expansion factor, which is crucial to reduce the defects of as-sprayed coatings and to form fine-lamellar-structures coatings with dense microstructure. The friction coefficient under the NaCl solution was reduced by approximately 70% compared with that under the dry condition. The tribo-chemical reactions between Si 3N 4 ball and water molecules play a significant role in wear behaviors for coating in water-lubricated systems. The wear performance of the coating was affected by the viscosity and corrosiveness of the solution in water-lubricated systems.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metallic Glasses and Amorphous Alloys · High-Temperature Coating Behaviors · Diamond and Carbon-based Materials Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (49)
Show source-provided references
1. Microstructure and corrosion resistance of ceramic coating on carbon steel prepared by plasma electrolytic oxidation10.1016/j.surfcoat.2009.10.023 ↗
2. Wear performance of Al-SiC-B4C hybrid composites under dry sliding conditions10.1016/j.matdes.2012.11.059 ↗
3. Cr/GLC multilayered coating in simulated deep-sea environment: corrosion behavior and growth defect evolution10.1016/j.corsci.2021.109528 ↗
4. Tribological behaviors of CrN/Cr3C2-NiCr duplex coating at elevated temperatures10.1016/j.surfcoat.2019.124926 ↗
5. Microstructure and properties of high velocity oxygen fuel sprayed WC-Co-Ni coatings
6. Effect of hydrostatic pressure on the corrosion behavior of HVOF-sprayed Fe-based amorphous coating10.1016/j.jallcom.2018.05.100 ↗
7. Corrosion and wear resistance of a Fe-based amorphous coating in underground environment10.1016/j.intermet.2012.03.026 ↗
8. Enhancing the tribological performance of the TiZrHfCuBe high entropy bulk metallic glass by Sn addition10.1016/j.triboint.2022.107529 ↗
9. Effects of structure relaxation and surface oxidation on nanoscopic wear behaviors of metallic glass10.1016/j.actamat.2022.117934 ↗
10. Wear behavior of HVOF-sprayed Fe-based amorphous coatings10.1016/j.intermet.2012.05.004 ↗
11. The effect of high-velocity oxy-fuel spraying parameters on microstructure, corrosion and wear resistance of Fe-based metallic glass coatings10.1016/j.jnoncrysol.2014.09.041 ↗
12. Microstructure and tribological properties of iron-based metallic glass coatings prepared by atmospheric plasma spraying10.1016/j.vacuum.2014.04.021 ↗
13. Formation and wear property of broad-beam laser clad Fe-based coatings10.1016/j.surfcoat.2020.126598 ↗
14. Effect of oxygen fuel rate on microstructure and wear properties of detonation sprayed iron-based amorphous coatings10.2320/matertrans.M2018273 ↗
15. Strategy for improving the wear-resistance properties of detonation sprayed Fe-based amorphous coatings by cryogenic cycling treatment10.1016/j.surfcoat.2021.126962 ↗
16. Corrosion resistance mechanisms of detonation sprayed Fe-based amorphous coating on AZ31B magnesium alloy10.1016/j.jnoncrysol.2021.121276 ↗
17. Effect of feedstock particle sizes on wear resistance of plasma sprayed Fe-based amorphous coatings10.1016/j.surfcoat.2014.08.050 ↗
18. Characterizations the deposition behavior and mechanical properties of detonation sprayed Fe-based amorphous coatings10.1016/j.jmrt.2022.03.140 ↗
19. Comparison of tribological behavior of Fe-based metallic glass coatings fabricated by cold spraying and high velocity air fuel spraying10.1016/j.jnoncrysol.2019.119582 ↗
20. Corrosive wear behaviors and mechanisms of a biocompatible Fe-based bulk metallic glass10.1016/j.jnoncrysol.2020.120088 ↗
21. Dry sliding wear behaviors of Fe-based amorphous metallic coating synthesized by D-gun spray10.1016/j.jnoncrysol.2020.120018 ↗
22. Tribological behaviors of a magnetron sputtered CrSiN coating under ambient air and wet environments10.1016/j.surfcoat.2017.05.093 ↗
23. Comparison of tribological properties of CrN, TiCN and TiAlN coatings sliding against SiC balls in water10.1016/j.apsusc.2011.04.035 ↗
24. Effect of oxygen/fuel ratio on the in-flight particle parameters and properties of HVOF WC-CoCr coatings10.1016/j.surfcoat.2011.03.129 ↗
25. Particle in-flight status and its influence on the properties of supersonic plasma-sprayed Fe-based amorphous metallic coatings10.1016/j.surfcoat.2018.11.049 ↗
26. Spraying of Fe-based amorphous coating with high corrosion resistance by HVAF10.1016/j.jmapro.2016.01.009 ↗
27. Microstructures and corrosion properties of novel Fe46.8-Mo30.6-Cr16.6-C4.3-B1.7 metallic glass coatings manufactured by vacuum plasma spray process10.1016/j.intermet.2020.107061 ↗
28. Long term semiconducting and passive film properties of a novel dense FeCrMoCBY amorphous coating by atmospheric plasma spraying10.1016/j.apsusc.2019.143600 ↗
29. Fe-based amorphous coating for corrosion protection of magnesium alloy10.1016/j.matdes.2016.07.031 ↗
30. Influence of laser remelting on organization, mechanical properties and corrosion resistance of Fe-based amorphous composite coating10.1016/j.surfcoat.2021.127081 ↗
31. Corrosion behaviour of plasma sprayed Fe based metallic glass (Fe73Cr2Si11B11C3 (at%) coatings in 3.5% NaCl solution10.1016/j.jnoncrysol.2021.120913 ↗
32. Interfacial bonding mechanism and properties of HVOF-sprayed Fe-based amorphous coatings on LA141 magnesium alloy substrate10.1016/j.surfcoat.2021.127801 ↗
33. Effect of applied potential on passivation and erosion–corrosion of a Fe-based amorphous metallic coating under slurry impingement10.1016/j.corsci.2014.01.004 ↗
34. Effects of crystallization on the corrosion resistance of Fe-based amorphous coatings10.1016/j.corsci.2012.02.003 ↗
35. Effects of structural relaxation and crystallization on the corrosion resistance of an Fe-based amorphous coating10.1016/j.jnoncrysol.2020.120378 ↗
36. Effect of Mo addition on corrosion behavior of high-entropy alloys CoCrFeNiMox in aqueous environments10.1007/s40195-018-0812-7 ↗
37. Synergistic effect of Mo, W, Mn and Cr on the passivation behavior of a Fe-based amorphous alloy coating10.1007/s40195-017-0604-5 ↗
38. Pitting corrosion behaviour of austenitic stainless steels-combining effects of Mn and Mo additions10.1016/j.corsci.2008.04.005 ↗
39. Electrochemical and tribocorrosion performances of CrMoSiCN coating on Ti-6Al-4V titanium alloy in artificial seawater10.1016/j.corsci.2019.108385 ↗
40. Y.Q. Fu, F. Zhou, M.D. Zhang, Q.Z. Wang, Z.F. Zhou, Structure and tribocorrosion behavior of CrMoSiCN nanocomposite coating with low C content in artificial seawater, Friction. 9 (2021): 1599–1615. doi:10.1007/s40544-020-0445-5.10.1007/s40544-020-0445-5 ↗
41. Long-term corrosion resistance and friction-induced antibacterial enhancement of CrMoSiCN coating on Ti6Al4V alloy10.1016/j.corsci.2021.109478 ↗
42. Influence of Ag target current on the structure and tribological properties of CrMoSiCN/Ag coatings in air and water10.1016/j.triboint.2021.107059 ↗
43. Sliding tribocorrosion behavior of Fe-based bulk metallic glass under corrosive environments10.1016/j.jnoncrysol.2018.12.024 ↗
44. Adaptive capacities of chromium doped graphite-like carbon films in aggressive solutions with variable pH10.1016/j.triboint.2015.12.048 ↗
45. The influence of Mo target current on the microstructure, mechanical and tribological properties of CrMoSiCN coatings in artificial seawater10.1016/j.jallcom.2019.03.351 ↗
46. Lubrication under charged conditions10.1016/j.triboint.2014.11.018 ↗
47. Influence of electric potentials on the tribological behaviour of silicon carbide10.1016/j.wear.2010.12.011 ↗
48. Friction and wear properties of CrN coatings sliding against Si3N4 balls in water and air10.1016/j.wear.2008.02.010 ↗
49. Structural, mechanical and tribocorrosion performances of CrMoSiN coatings with various Mo contents in artificial seawater10.1016/j.apsusc.2020.146629 ↗