Effects of heat treatment in air on soft magnetic properties of FeCoSiBPC amorphous core
Source abstract
Abstract
The oxidation behavior and soft magnetic properties of industrially prepared Fe 80Co 3Si 3B 10P 1C 3 amorphous cores were investigated under heat treatment in air. Results indicate that the FeCoSiBPC amorphous core heat-treated in air can obtain higher permeability ( μ i) and maximum saturation magnetic induction ( B m) than that annealed in vacuum. The improvement of soft magnetic properties originates from the formation of a Co-rich layer between the oxide layer and the amorphous substrate after the selective oxidation of Fe. The core loss ( P cm) of the amorphous cores decreases after annealing at 280 ℃ in air for 30 min, and increases with the annealing time extend to 60 min. The P cm of the samples treated in air is inferior to that of the ones annealed in vacuum for 30 min. The variation of P cm can be explained by the thinning of the amorphous substrate based on the Gyorgy`s model and simple models of domain wall pinning.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metallic Glasses and Amorphous Alloys · Magnetic Properties of Alloys · Magnetic properties of thin films
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (34)
Show source-provided references
1. Magnetic Materials and Devices for the 21st Century: stronger, Lighter, and More Energy Efficient10.1002/adma.201002180 ↗
2. Composition design for Fe-based soft magnetic amorphous and nanocrystalline alloys with high Fe content10.1016/j.matdes.2020.108511 ↗
3. Nanocrystalline Soft Magnetic Fe-Si-B-P-Cu Alloys With High of 1.8-1.9T Contributable to Energy Saving10.1109/TMAG.2011.2175210 ↗
4. Fe-based bulk metallic glasses: glass formation, fabrication, properties and applications10.1016/j.pmatsci.2019.01.003 ↗
5. Soft magnetic materials for a sustainable and electrified worl10.1126/science.aao0195 ↗
6. Research progress and application prospect of Fe-based soft magnetic amorphous/nanocrystalline alloys
7. S.R.J. Saunders, M. Monteiro, F. Rizzo, The oxidation behaviour of metals and alloys at high temperatures in atmospheres containing water vapour: a review, Prog. Mater. Sci.. 53(2008) 757–837, c10.1016/j.pmatsci.2007.11.001.10.1016/j.pmatsci.2007.11.001 ↗
8. Birks · 2006
9. Oxidation behavior of bulk metallic glass during thermoplastic forming
10. X-ray photoelectron spectroscopic studies of surface oxidation of metallic glasses10.1007/BF00543823 ↗
11. Surface Crystallization Induced by Selective Oxidation of Boron in Fe-B-Si Amorphous Alloy10.4028/www.scientific.net/KEM.40-41.63 ↗
12. Oxidation Behavior of Fe-based Amorphous Ribbons10.1016/S1006-706X(16)30179-0 ↗
13. Reduction of Power Losses in the Tape-Wound FeNiCuNbSiB Nanocrystalline Cores Using Interlaminar Insulation
14. Significant improvement of soft magnetic properties for Fe(Co)BPSiC amorphous alloys by magnetic field annealing10.1016/j.jallcom.2018.01.311 ↗
15. Effect of Pre-Oxidation Treatment on Corrosion Resistance of FeCoSiBPC Amorphous Alloy10.3390/ma15093206 ↗
16. Industry-oriented Fe-based amorphous soft magnetic composites with SiO2-coated layer by one-pot high-efficient synthesis method10.1016/j.jmmm.2020.166924 ↗
17. Soft magnetic composite materials (SMCs)10.1016/j.jmatprotec.2007.02.034 ↗
18. Irreversible Permeability of Fe-Based Soft Magnetic Composites10.12693/APhysPolA.137.843 ↗
19. Steinmetz law for ac magnetized iron-phenolformaldehyde resin soft magnetic composites10.1016/j.jmmm.2016.10.060 ↗
20. Improvement in high frequency magnetic properties of amorphous cores by thin surface oxide layers on ribbons10.1051/jp4:1998219 ↗
21. Core-loss reduction of Fe–Si–Cr crystalline alloy according to particle size in the high frequency band10.1016/j.cap.2022.05.021 ↗
22. Magnetic softness, dynamic magnetization, and relaxation behavior of FeSiBC amorphous alloys10.1007/s10854-020-02979-7 ↗
23. Appearance of inverted hysteresis, pinning effect in amorphous FeCoB ribbon with annealing: a Kerr microscopy investigation10.1016/j.jnoncrysol.2021.121073 ↗
24. Effect of residual strain in Fe-based amorphous alloys on field induced magnetic anisotropy and domain structure10.1063/1.4799969 ↗
25. Gyorgy · Amorphous Alloys as Soft Magnetic Materials Ⅱ · 1976 · 29 · 198
26. Oxidation of amorphous alloys10.1016/j.jmst.2018.02.015 ↗
27. Surface oxidation and crystallization of FeNi-Based soft magnetic nanocrystalline and amorphous nanocomposite alloys10.1016/j.jallcom.2020.155038 ↗
28. Surface quality and thickness effects of amorphous ribbons for recording head applications, S. Steeb, H. Warlimont10.1016/B978-0-444-86939-5.50026-9 ↗
29. Influence of surface roughness on magnetic properties of Fe-Si-B amorphous alloys10.1109/20.706466 ↗
30. Analysis of XPS spectra of Fe2+ and Fe3+ ions in oxide materials10.1016/j.apsusc.2007.09.063 ↗
31. Barin · 1995
32. Air-oxidation behavior of a [(Fe50Co50)75B20Si5]96Nb4 bulk metallic glass at 500–650°C10.1016/j.corsci.2012.08.046 ↗
33. Effect of Co addition on crystallization and magnetic properties of FeSiBPCu alloy10.1016/j.pnsc.2014.10.002 ↗
34. Correlation between soft-magnetic properties and Tx1-Tc in high Bs FeCoSiBPC amorphous alloys10.1016/j.jallcom.2015.11.044 ↗