Strengthening and toughening of Mg-based bulk metallic glass via in-situ formed B2-type AgMg phase

Abstract By tuning the composition and melt cooling rate, in situ composites of bulk metallic glass (BMG) with primary phase of B2-type AgMg compound can be fabricated in Mg–Cu–Ag–Y quaternary systems. In the composite, volume fraction of AgMg dendrites dispersed in the glass matrix varies in a range of 20–40%. In contrast to monolithic BMG, Mg 52.8 Cu 19.9 Ag 19.5 Y 7.8 composite with AgMg of 40 vol.% dendrites manifest a distinct improvement in the compressive yield strength (~ 1040 MPa), fracture strength (1.2 GPa) and plastic strain (0.4–2%), as well as an apparent work-hardening effect. Moreover, AgMg phase in the composite plays a significant role to suppress the crack propagation, then enhancing the fracture toughness, as indicated by an increment of notch toughness ( K Q ) from ~ 6 MPa m 1/2 of monolithic BMG to ~ 8 MPa m 1/2 of the composite. However, since the tiny plastic zone size of glassy matrix is unable to match the microstructural length scales, improvement in the ductility and toughness of Mg-based BMG in situ composite remains limited.