The rheological behavior and thermoplastic deformation of Zr-based bulk metallic glasses
Source abstract
Abstract
Abstract In this paper, the rheological behavior and thermoplastic deformation of Zr61.88Cu18Ni10.12Al10 bulk metallic glasses (BMGs) in the supercooled liquid region (SCLR) were studied by high temperature compression tests and a processing map was constructed. The results indicated that the flow stress of present alloy in the SCLR is very sensitive to temperature and strain-rate. The flow stress decreases with increasing temperature and decreasing strain-rate. The viscosity coefficient of the present alloy ranges from 1011 Pa.s to 109 Pa.s and decreases with increasing temperature and strain-rate. When the strain-rate is greater than 5 × 10−3 s−1, the Zr61.88Cu18Ni10.12Al10 alloy undergoes a transition from Newtonian fluid to non-Newtonian fluid. The surface profile exhibited a similar shape of the letter ‘N' after high temperature compression in the deeply SCLR. The optimum hot processing region of Zr61.88Cu18Ni10.12Al10 alloy is 688 K–708 K with a low strain-rate and 708 K–723 K with a high strain-rate.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metallic Glasses and Amorphous Alloys
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (26)
Show source-provided references
1. Micro thermoplastic forming of a Pd-based metallic glass: theory and applications10.1016/S1006-706X(17)30056-0 ↗
2. Thermoplastic forming of bulk metallic glasses10.1111/j.2041-1294.2012.00083.x ↗
3. The precision replication of a microchannel mould by hot-embossing a Zr-based bulk metallic glass10.1016/j.intermet.2011.10.001 ↗
4. Critical fictive temperature for plasticity in metallic glasses10.1038/ncomms2546 ↗
5. A thermoplastic forming map of a Zr-based bulk metallic glass10.1016/j.actamat.2012.12.013 ↗
6. High temperature deformation of a Cu40Zr44Ag8Al8 bulk metallic glass10.1016/j.msea.2011.01.045 ↗
7. Processing of bulk metallic glass10.1002/adma.200902776 ↗
8. A microscopic mechanism for steady state inhomogeneous flow in metallic glasses10.1016/0001-6160(77)90232-2 ↗
9. Thermoplastic deformation and structural evolutions in nanoimprinting metallic glasses using molecular dynamics analysis10.1016/j.jnoncrysol.2015.07.011 ↗
10. Thermoplastic deformation and micro/nano-replication of an Au-based bulk metallic glass in the supercooled liquid region10.1016/j.msea.2012.07.017 ↗
11. Enhanced formability of a Zr-based bulk metallic glass in a supercooled liquid state by vibrational loading10.1016/j.actamat.2013.11.009 ↗
12. Timescales of crystallization and viscous flow of the bulk glass-forming Zr-Ti-Ni-Cu-Be alloys10.1103/PhysRevB.67.184203 ↗
13. Deformation behavior and formability of a Ti–Zr–Ni–Be bulk metallic glass within supercooled liquid region10.1016/j.intermet.2010.04.002 ↗
14. High strain rate thermoplastic demolding of metallic glasses10.1016/j.scriptamat.2016.06.021 ↗
15. Micro-patterning by thermoplastic forming of Ni-free Ti-based bulk metallic glasses10.1016/j.matdes.2017.01.080 ↗
16. Stabilization of metallic supercooled liquid and bulk amorphous alloys10.1016/S1359-6454(99)00300-6 ↗
17. Super plastic bulk metallic glasses at room temperature10.1126/science.1136726 ↗
18. Deformation behavior and constitutive equation for Zr55Cu30Al10Ni5 bulk metallic glass in supercooled liquid
19. Plasticity and structural instability in a bulk metallic glass deformed in the supercooled liquid region10.1016/S1359-6454(01)00218-X ↗
20. On the kinetics of structural relaxation in metallic glasses10.4028/www.scientific.net/KEM.81-83.3 ↗
21. Wang · 2013
22. Superplastic flow in a Zr65Al10Ni10Cu15 metallic glass crystallized during deformation in a supercooled liquid region10.1016/j.scriptamat.2003.08.014 ↗
23. Superplasticity and superplastic forming ability of a Zr–Ti–Ni–Cu–Be bulk metallic glass in the supercooled liquid region10.1016/j.jnoncrysol.2004.11.006 ↗
24. Method for hot processing map based on Matlab
25. Modeling of dynamic material behavior in hot deformation: forging of Ti-624210.1007/BF02664902 ↗
26. On the development of instability criteria during hotworking with reference to IN 71810.1016/S0921-5093(98)00764-3 ↗