A kinetic study approach for in-situ preparation of amorphous Ni based nanocomposite reinforced by nanocrystalline Ni-Ti shape memory alloy
Source abstract
Abstract
Abstract In-situ preparation of nanocomposite including a shape memory alloy (Ni-Ti) as reinforcement in the Ni amorphous matrix is the subject of this content. Firstly, the amorphous alloy has been prepared using high-energy ball milling of pure elements, i.e., Ni, Nb, Ti and Si as alloying elements. Then, by the employment of kinetic modeling, the crystallization process (i.e., as a two-step phenomenon) of prepared amorphous alloy has been controlled in a way that provides the possibility of the formation of Ni-Ti as the reinforcement within the Ni amorphous alloy matrix. Also, the kinetic modeling revealed that the crystallization can be explained using the Johnson-Mehl-Avrami (JMA) model. Also, the crystallization phenomenon started by interface controlled with one-dimensional growth of nuclei at first and followed by interface controlled with two and three-dimensional growth of nuclei.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metallic Glasses and Amorphous Alloys · Shape Memory Alloy Transformations · Phase-change materials and chalcogenides
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (28)
Show source-provided references
1. Amorphization and nanocrystallization of Ni–Nb-Si alloys10.1016/j.msea.2016.11.041 ↗
2. Preparation of magnetic Ni-P amorphous alloy microspheres and their catalytic performance towards thermal decomposition of ammonium perchlorate10.1016/j.apsusc.2017.07.021 ↗
3. Effect of process control agent on the structural and magnetic properties of nano/amorphous Fe0.7Nb0.1Zr0.1Ti0.1 powders prepared by high energy ball milling10.1016/j.jmmm.2017.10.018 ↗
4. Effects of pre-deformation annealing on mechanical properties of Ti-based amorphous alloys10.1016/S1875-5372(17)30198-4 ↗
5. Indentation creep behaviors of amorphous cu-based composite alloys10.1016/j.physb.2018.01.032 ↗
6. Effects of Zr on the amorphization of Cu-Ni-Zr alloys prepared by mechanical alloying10.1016/j.jallcom.2018.04.259 ↗
7. Amorphous Zr-Cu thin-film alloys with metallic glass behavior10.1016/j.jallcom.2016.12.098 ↗
8. Modeling of stress relaxation kinetics of amorphous Fe0.7Nb0.1Zr0.1Ti0.1 alloy powder: a novel approach based on differential thermal analysis10.1016/j.powtec.2018.06.021 ↗
9. Preparation of amorphous Fe-based magnetic powder by water atomization10.1016/j.powtec.2011.06.026 ↗
10. Formation of Fe–Nb–X (X=Zr, Ti) amorphous alloys from pure metal elements by mechanical alloying10.1016/j.physb.2011.10.043 ↗
11. Fabrication of FINEMET bulk alloy from amorphous powders by spark plasma sintering10.1016/j.powtec.2015.11.060 ↗
12. Effect of (Mo, W) substitution for Nb on glass forming ability and magnetic properties of Fe–Co-based bulk amorphous alloys fabricated by centrifugal casting10.1016/j.jallcom.2010.11.011 ↗
13. Improvement of glass forming ability and soft magnetic properties of Fe-C-Si-P amorphous alloys through a flux treatment technique10.1007/s12540-014-1001-5 ↗
14. Formation of nanostructured and amorphous β-Al3Mg2 based alloys by rapid solidification and mechanical milling10.1016/j.msea.2010.04.056 ↗
15. Suryanarayana · 2004
16. Shape memory alloy-reinforced metal-matrix composites: a review10.1007/s40195-014-0164-x ↗
17. A review on shape memory metallic alloys and their critical stress for twinning10.1016/j.intermet.2018.11.005 ↗
18. Ni-Ti SMA-reinforced Al composites10.1007/s11837-000-0084-2 ↗
19. Morrison · 2009
20. Improvement of soft magnetic properties of Fe0.7Nb0.1Zr0.1Ti0.1 amorphous alloy: a kinetic study approach10.1016/j.jnoncrysol.2018.04.033 ↗
21. Vyazovkin · 2015
22. An innovative reaction model determination methodology in solid state kinetics based on variable activation energy10.1016/j.tca.2014.03.025 ↗
23. Study of amorphous phase in Fe100−x(NbTiTa)x alloys synthesized by mechanical alloying and its effect on the crystallization phenomenon10.1016/j.jnoncrysol.2013.11.005 ↗
24. On the crystallization behavior of amorphous Fe–Cr–Mo–B–P–Si–C powder prepared by mechanical alloying10.1016/j.matlet.2010.02.008 ↗
25. Quasi-dislocation dipole-type defects and low coercivity of Fe-based soft magnetic glassy alloys
26. Magnetization process and coercivity of Fe-(Al, Ga)-(P, C, B, Si) soft magnetic glassy alloys10.2320/matertrans.45.1219 ↗
27. Origin of low coercivity of Fe-(Al, Ga)-(P, C, B, Si, Ge) bulk glassy alloys10.2320/matertrans.44.2020 ↗
28. Magnetic properties of amorphous ferromagnetic alloys10.1016/0304-8853(79)90029-5 ↗