Synthesis of PbO·SiO2 glass by CO2 laser melting method
Source abstract
Abstract
Abstract Described herein is a new approach to produce glass materials using a CO2 laser as unique heating source. In this study, the well-known PbO·SiO2 (PS) system was chosen as a glass model because of its very good glass forming ability and stoichiometric crystallization. The laser-produced glasses presented the same temperature stability as the conventionally produced glass, as observed by DSC results, without the presence of crystalline phases according to XRD and Raman results. Additionally, no structural change was detected among the glasses, when probed by Raman and XANES. After thermal treatment at 730 °C for 1 h, the laser-produced glass crystalizes to the alamosite (PbSiO3) phase which confirms the nominal stoichiometry without Pb volatilization. In optimal conditions, the total PS laser-produced glass was synthesized within 3 min., which is remarkably fast in comparison to conventional processes using an electric furnace that can last several hours.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Glass properties and applications · Building materials and conservation · Laser Material Processing Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (34)
Show source-provided references
1. Structural study on PbO–SiO2 glasses by X-ray and neutron diffraction and 29Si MAS NMR measurements10.1111/j.1551-2916.2005.00297.x ↗
2. Gamma-ray shielding and structural properties of PbO–SiO2 glasses10.1016/j.nimb.2008.02.004 ↗
3. Elemental and cooperative diffusion in a liquid, supercooled liquid and glass resolved10.1063/1.4986507 ↗
4. The structure of lead silicate glasses determined by vibrational spectroscopy10.1007/BF00647770 ↗
5. Structure and lattice dynamics of binary lead silicate glasses investigated by infrared spectroscopy10.1016/j.jnoncrysol.2006.02.004 ↗
6. Structure and properties of lead silicate glasses and melts10.1016/j.chemgeo.2017.03.030 ↗
7. Erbium-doped lead silicate glass for near-infrared emission and temperature-dependent up-conversion applications10.1016/j.opelre.2017.06.011 ↗
8. Laser sintering and radioluminescence emission of pure and doped Y2O3 ceramics10.1016/j.ceramint.2014.07.056 ↗
9. Radioluminescence emission of YAG: RE laser-sintered ceramics10.1016/j.matlet.2015.08.017 ↗
10. Polymeric synthesis and conventional versus laser sintering of CaCu3Ti4O12 electroceramics:(micro) structures, phase development and dielectric properties10.1016/j.jallcom.2015.09.027 ↗
11. Conductive atomic force microscopy characterization of PTCR-BaTiO3 laser-sintered ceramics10.1016/j.jeurceramsoc.2016.01.012 ↗
12. Persistent luminescence properties of SrBXAl2 −XO4: Eu,Dy laser-sintered ceramics10.1016/j.optmat.2017.05.017 ↗
13. Laser sintering of persistent luminescent CaAl2O4: Eu2+ Dy3+ ceramics10.1016/j.optmat.2016.10.050 ↗
14. Effect of conventional and laser sintering on the (micro) structural and dielectric properties of Bi2/3Cu3Ti4O12 synthesized through a polymeric precursor route10.1016/j.jallcom.2017.10.140 ↗
15. Enhanced stability and electrocatalytic properties of Ti/RuxIr1−xO2 anodes produced by a new laser process10.1016/j.cej.2018.08.145 ↗
16. Selective laser melting of soda-lime glass powder10.1111/ijac.12338 ↗
17. On the possibility of selective laser melting of quartz glass10.1016/j.phpro.2014.08.117 ↗
18. Processing metallic glasses by selective laser melting10.1016/j.mattod.2013.01.018 ↗
19. New approach to amorphization of alloys with low glass forming ability via selective laser melting10.1016/j.jallcom.2018.08.075 ↗
20. In vitro degradation behavior and cytocompatibility of ZK30/bioactive glass composites fabricated by selective laser melting for biomedical applications10.1016/j.jallcom.2019.01.165 ↗
21. Fityk: a general-purpose peak fitting program10.1107/S0021889810030499 ↗
22. Raman scattering and molecular dynamics investigation of lead metasilicate glass and supercooled liquid structures10.1016/j.jnoncrysol.2018.07.048 ↗
23. Compound formation and phase equilibria in the system PbO-SiO210.1111/j.1151-2916.1974.tb11416.x ↗
24. A Raman investigation of the structural evolution of supercooled liquid barium disilicate during crystallization10.1111/ijag.12356 ↗
25. Neutron irradiation effects of PbO-SiO2 glasses10.1016/0022-3115(91)90127-S ↗
26. Vibrational spectroscopic studies of some lead silicate glasses10.1016/0022-3093(78)90150-3 ↗
27. Raman spectra of glassy PbO–SiO2 system10.1143/JPSJ.36.917 ↗
28. A multispectroscopic structural study of lead silicate glasses over an extended range of compositions10.1016/j.jnoncrysol.2009.12.003 ↗
29. Lead silicate glasses: binary network-former glasses with large amounts of free volume10.1103/PhysRevB.82.134209 ↗
30. The structure of lead-silicate glasses: molecular dynamics and EXAFS studies10.1088/0953-8984/13/43/309 ↗
31. A study of SiO2 glass and supercooled liquid to 1950 K via high-temperature raman spectroscopy10.1016/0016-7037(94)90156-2 ↗
32. The structure of high-silica alkali-silicate glasses. a raman spectroscopic investigation10.1016/0022-3093(83)90032-7 ↗
33. Optical properties of 3dN transition metal ion-doped lead borate glasses10.1016/j.materresbull.2016.06.032 ↗
34. Raman and infrared spectroscopic studies of the crystalline phases in the system Pb2SiO4-PbSiO310.1111/j.1151-2916.1979.tb19076.x ↗