Cooling history of a wet-granulated blast furnace slag (GBS)
Source abstract
Abstract
Abstract Granulated blast furnace slag (GBS) is a glassy by-product of the steel industry that is formed during quenching of the molten slag after the blast furnace in a water-jet. To elucidate the cooling history of GBS, calorimetric scanning in the glass transition range and viscometric experiments at temperatures above the liquidus were performed. The GBS studied was of industrial origin with a d50 = 700 μm and > 99% glassy. It is found that GBS glass is of high potential energy, showing a fictive temperature that is approx. 160 K higher than the glass transition temperature under standard cooling conditions. Using different viscosity models and the relationship between quench rate and shear viscosity at the fictive temperature it is calculated that GBS was formed at a cooling rate of approx. 2.6 × 105 K s−1 corresponding to a shear viscosity of 105.9 Pa s. Due to the high Tf and high amount of heat that is released during structural relaxation, GBS is assigned to the class of hyperquenched glasses.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metallurgical Processes and Thermodynamics · Recycling and utilization of industrial and municipal waste in materials production · Geological and Geochemical Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (45)
Show source-provided references
1. Slags and slag cement
2. Slag structure and identification of slags
3. High performance cementing materials from industrial slags – a review10.1016/S0921-3449(99)00060-9 ↗
4. Steel slag – its production, processing, characteristics, and cementitious properties10.1061/(ASCE)0899-1561(2004)16:3(230) ↗
5. CO2 emissions and energy consumption of granulated blastfurnace slag
6. Partial replacement of cement by ground granulated blast furnace slag in concrete
7. Ground granulated blast slag (GGBS) in concrete – a review
8. Role of binary cement including supplementary cementitious material (SCM) in production of environmentally sustainable concrete: a critical review10.1016/j.ijsbe.2017.07.003 ↗
9. Investigation of hydraulic activity of ground granulated blast furnace slag in concrete10.1016/S0008-8846(03)00062-0 ↗
10. Reactivity and performance of blastfurnace slags of differing origin10.1016/j.cemconcomp.2009.12.002 ↗
11. Determination of optimum blast furnace slag cooling rate for slag recycling in cement manufacture10.1179/1743281214Y.0000000242 ↗
12. Crystallization properties of molten blast furnace slag at different cooling rates10.1016/j.applthermaleng.2015.11.075 ↗
13. Recent advances in understanding physical properties of metallurgical slags10.1007/s12540-017-6750-5 ↗
14. Dependence of the glass transition temperature on heating and cooling rate10.1021/j100619a008 ↗
15. Dependence of the fictive temperature of glass on cooling rate10.1111/j.1151-2916.1976.tb09376.x ↗
16. Use of the Adam-Gibbs equation in the analysis of structural relaxation10.1111/j.1151-2916.1984.tb19643.x ↗
17. Determination of the fictive temperature for a hyperquenched glass10.1016/S0009-2614(02)00434-7 ↗
18. Fictive temperature, cooling rate, and viscosity of glasses10.1063/1.1689951 ↗
19. Das Temperaturabhängigkeitsgesetz der Viskosität von Flüssigkeiten
20. Analysis of recent measurements of viscosity of glass10.1111/j.1151-2916.1925.tb16731.x ↗
21. Die Abhängigkeit der Viskosität von der Temperatur bei unterkühlten Flüssigkeiten10.1002/zaac.19261560121 ↗
22. On the temperature dependence of cooperative relaxation properties in glass-forming liquids10.1063/1.1696442 ↗
23. Effect of disorder on diffusion and viscosity in condensed systems10.1016/0022-3093(88)90396-1 ↗
24. Viscosity of glass-forming liquids10.1073/pnas.0911705106 ↗
25. An equation for the representation of high-temperature heat content data10.1021/ja01347a029 ↗
26. Viscosity measurements of glass melts – certification of reference material
27. Viscosity, relaxation and elastic properties of photo-thermo-refractive glass10.1016/j.jnoncrysol.2008.10.002 ↗
28. A test of the Hruby parameter to estimate glass-forming ability10.1016/S0022-3093(03)00079-6 ↗
29. Can glass stability parameters infer glass forming ability?10.1016/j.jnoncrysol.2005.08.013 ↗
30. Theoretical analysis of relative changes of the Hrubý, Weinberg, and Lu–Liu glass stability parameters with application on some oxide and chalcogenide glasses10.1016/j.tca.2009.10.023 ↗
31. Evaluation of glass-forming tendency by means of DTA10.1007/BF01690134 ↗
32. Systematische Untersuchung über die Anwendbarkeit von Penetrationsviskometern
33. Experimental evaluation of beam-bending method of determining glass viscosities in the range 108 to 1015 poises10.1111/j.1151-2916.1963.tb11684.x ↗
34. Viscosity and glass transition temperature of hydrous float glass10.1016/j.jnoncrysol.2006.11.009 ↗
35. Water, the other network modifier in borate glasses10.1016/j.jnoncrysol.2015.10.010 ↗
36. Composition dependence of glass transition temperature and fragility. I. A topological model incorporating temperature-dependent constraints10.1063/1.3077168 ↗
37. The iso-structural viscosity, configurational entropy and fragility of oxide liquids10.1016/j.jnoncrysol.2009.01.032 ↗
38. Universality of the high-temperature viscosity limit of silicate liquids10.1103/PhysRevB.83.212202 ↗
39. Relaxation kinetics of the mechanical properties of an aluminosilicate glass10.1016/j.jnoncrysol.2012.11.017 ↗
40. Linking equilibrium and nonequilibrium dynamics in glass-forming systems10.1021/acs.jpcb.6b00141 ↗
41. Potential energy, relaxation, vibrational dynamics and the boson peak, of hyperquenched glasses
42. Na-K ion exchange reaction between rhyolitic glass and (Na, K)Cl aqueous solution under hydrothermal conditions10.1016/0016-7037(90)90110-7 ↗
43. M.J. Dejneka, A.J. Ellison, S. Gomez, Ion exchanged, fast cooled glasses, US Patent (2012) 8,232,218 B2.
44. Environmental effects on fatigue of alkaline earth aluminosilicate glass with varying fictive temperature10.1016/j.jnoncrysol.2013.08.005 ↗
45. Physical performances of blended cements containing calcium aluminosilicate glass powder and limestone10.1016/j.cemconres.2010.12.005 ↗