An anionic spherical polyelectrolyte brushes-driven approach to synthesize conductive composites
Source abstract
Abstract
The composites of anionic spherical polyelectrolyte brushes/conducing polymer (ASPB/CP) have been successfully prepared by chemical oxidative polymerization of aniline and pyrrole monomers in an acidic medium containing anionic spherical polyelectrolyte brushes. These composites were characterized by field emission scanning electron microscopy, transmission electron microscopy, Fourier-transform infrared spectrometry, zeta potentials, X-ray photoelectron spectroscopy, and four probe methods. It was found that the poly(aniline-co-pyrrole) was uniformly coated on the surface of ASPB. Besides, the ASPB/CP composites had higher doping level than the pure copolymer after doping with ASPB. Moreover, these composites also showed better solubility and storage stability than pure copolymer. The electrical conductivity of the ASPB/CP composites at room temperature was 7.2 S/cm, while it was 2.4 S/cm for the pure copolymer under the same circumstances.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Conducting polymers and applications · Advanced Sensor and Energy Harvesting Materials · Nanomaterials and Printing Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (24)
Show source-provided references
1. Baeg K-J, Caironi M, Noh Y-Y (2013) Toward printed integrated circuits based on unipolar or ambipolar polymer semiconductors. Adv Mater 25:4210–424410.1002/adma.201205361 ↗
2. Cho J, Shin K-H, Jang J (2010) Micropatterning of conducting polymer tracks on plasma treated flexible substrate using vapor phase polymerization-mediated inkjet printing. Synth Met 160:1119–112510.1016/j.synthmet.2010.02.010 ↗
3. Crowley K et al (2008) Fabrication of an ammonia gas sensor using inkjet-printed polyaniline nanoparticles. Talanta 77:710–71710.1016/j.talanta.2008.07.022 ↗
4. Fusalba F, Bélanger D (1999) Electropolymerization of polypyrrole and polyaniline − polypyrrole from organic acidic medium. J Phys Chem B 103:9044–905410.1021/jp9916790 ↗
5. Huang Y, Su N, Zhang X, Zhao J, Li H, Liu X, Zhang H (2014) Controllable synthesis and characterization of poly(aniline-co-pyrrole) using anionic spherical polyelectrolyte brushes as dopant and template. Polym Compos 35:1858–186310.1002/pc.22841 ↗
6. Jie S, Dingwen Z, Junjie L, Xiaodong L, Zhuo S, Sumei H (2013) Fabrication and evaluation of low-cost Cu2ZnSn(S, Se)4 counter electrodes for dye-sensitized solar cells. Nano-Micro Lett 5:281–28810.1007/BF03353759 ↗
7. Kang H, Kitsomboonloha R, Ulmer K, Stecker L, Grau G, Jang J, Subramanian V (2014) Megahertz-class printed high mobility organic thin-film transistors and inverters on plastic using attoliter-scale high-speed gravure-printed sub-5 μm gate electrodes. Org Electron 15:3639–364710.1016/j.orgel.2014.10.005 ↗
8. Kawahara J et al (2013) Flexible active matrix addressed displays manufactured by printing and coating techniques. J Polym Sci Part B 51:265–27110.1002/polb.23213 ↗
9. Kim BJ, Oh SG, Han MG, Im SS (2002) Preparation of PANI-coated poly(styrene-co-styrene sulfonate) nanoparticles. Polymer 43:111–11610.1016/S0032-3861(01)00614-0 ↗
10. Kim Y, Lee B, Yang S, Byun I, Jeong I, Cho SM (2012) Use of copper ink for fabricating conductive electrodes and RFID antenna tags by screen printing. Curr Appl Phys 12:473–47810.1016/j.cap.2011.08.003 ↗
11. Marini M, Pilati F, Pourabbas B (2008) Smooth surface polypyrrole-silica core-shell nanoparticles: preparation, characterization and properties. Macromol Chem Phys 209:1374–138010.1002/macp.200800009 ↗
12. Mauthner G, Landfester K, Köck A, Brückl H, Kast M, Stepper C, List EJW (2008) Inkjet printed surface cell light-emitting devices from a water-based polymer dispersion. Org Electron 9:164–17010.1016/j.orgel.2007.10.007 ↗
13. Na S-I, Kim S-S, Jo J, Kim D-Y (2008) Efficient and flexible ITO-free organic solar cells using highly conductive polymer anodes. Adv Mater 20:4061–406710.1002/adma.200800338 ↗
14. Nie X, Wang H, Zou J (2012) Inkjet printing of silver citrate conductive ink on PET substrate. Appl Surf Sci 261:554–56010.1016/j.apsusc.2012.08.054 ↗
15. Raghuraman G, Rühe J, Dhamodharan R (2008) Grafting of PMMA brushes on titania nanoparticulate surface via surface-initiated conventional radical and “controlled” radical polymerization (ATRP). J Nanopart Res 10:415–42710.1007/s11051-007-9268-9 ↗
16. Sanchez-Romaguera V et al (2015) Inkjet printed paper based frequency selective surfaces and skin mounted RFID tags: the interrelation between silver nanoparticle ink, paper substrate and low temperature sintering technique. J Mater Chem C 3:2132–214010.1039/C4TC02693D ↗
17. Singh M, Haverinen HM, Dhagat P, Jabbour GE (2010) Inkjet printing—process and its applications. Adv Mater 22:673–68510.1002/adma.200901141 ↗
18. Tang W, Feng L, Jiang C, Yao G, Zhao J, Cui Q, Guo X (2014) Controlling the surface wettability of the polymer dielectric for improved resolution of inkjet-printed electrodes and patterned channel regions in low-voltage solution-processed organic thin film transistors. J Mater Chem C 2:5553–555810.1039/c4tc00343h ↗
19. Tekoglu S, Hernandez-Sosa G, Kluge E, Lemmer U, Mechau N (2013) Gravure printed flexible small-molecule organic light emitting diodes. Org Electron 14:3493–349910.1016/j.orgel.2013.09.027 ↗
20. Weng B, Morrin A, Shepherd R, Crowley K, Killard AJ, Innis PC, Wallace GG (2014) Wholly printed polypyrrole nanoparticle-based biosensors on flexible substrate. J Mater Chem B 2:793–79910.1039/C3TB21378A ↗
21. Wu G, Li L, Li J-H, Xu B-Q (2006) Methanol electrooxidation on Pt particles dispersed into PANI/SWNT composite films. J Power Sources 155:118–12710.1016/j.jpowsour.2005.04.035 ↗
22. Xu P, Han X, Wang C, Zhang B, Wang X, Wang H-L (2008) Facile synthesis of polyaniline-polypyrrole nanofibers for application in chemical deposition of metal nanoparticles. Macromol Rapid Commun 29:1392–139710.1002/marc.200800173 ↗
23. Zhang H, Rühe J (2005) Weak polyelectrolyte brushes as substrates for the formation of surface-attached polyelectrolyte–polyelectrolyte complexes and polyelectrolyte multilayers. Macromolecules 38:10743–1074910.1021/ma047500n ↗
24. Zhang Z, Wan M, Wei Y (2006) Highly crystalline polyaniline nanostructures doped with dicarboxylic acids. Adv Funct Mater 16:1100–110410.1002/adfm.200500636 ↗