Sheet-like Li3V2(PO4)3 nanocomposite coated by SiO2 + C with better electrochemical properties for lithium-ion batteries
Source abstract
Abstract
Sheet-like Li3V2(PO4)3 nanocomposite coated by SiO2 + C layer was synthesized with one-step solid-state method. Dihydroxydiphenylsilane (DPSD) was used as the source of SiO2 and C. The sheet-like Li3V2(PO4)3 nanocomposite has a thickness in the range of 20–30 nm. Because of the SiO2 + C-coated layer and the sheet-like morphology, the Li3V2(PO4)3/(SiO2 + C) composites show better stability and higher capacity than pure Li3V2(PO4)3 material and granular Li3V2(PO4)3/(SiO2 + C) composites. The best sample, Li3V2(PO4)3/(SiO2 + C)(2:8), shows a discharge capacity of 193.7 mAh g−1 at 1C within the voltage range of 3.0–4.8 V and retains almost 90 % of the capacity after 50 cycles.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Semiconductor materials and devices
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (39)
Show source-provided references
1. Amanieu H-Y, Rosato D, Sebastiani M, Massimi F, Lupascu DC (2014) Mechanical property measurements of heterogeneous materials by selective nanoindentation: application to LiMn2O4 cathode. Mater Sci Eng, A 593:92–102. doi: 10.1016/j.msea.2013.11.04410.1016/j.msea.2013.11.044 ↗
2. Bini M, Ferrari S, Capsoni D, Massarotti V (2011) Mn influence on the electrochemical behaviour of Li3V2(PO4)3 cathode material. Electrochim Acta 56(6):2648–2655. doi: 10.1016/j.electacta.2010.12.01110.1016/j.electacta.2010.12.011 ↗
3. Chen J-M, Hsu C-H, Lin Y-R, Hsiao M-H, Fey GT-K (2008) High-power LiFePO4 cathode materials with a continuous nano carbon network for lithium-ion batteries. J Power Sources 184(2):498–502. doi: 10.1016/j.jpowsour.2008.04.02210.1016/j.jpowsour.2008.04.022 ↗
4. Chen L, Yan B, Xie Y, Wang S, Jiang X, Yang G (2014a) Preparation and electrochemical properties of Li3V1.8Mn0.2(PO4)3 doped via different Mn sources. J Power Sources 261:188–197. doi: 10.1016/j.jpowsour.2014.03.06110.1016/j.jpowsour.2014.03.061 ↗
5. Cheng B, Zhang X-D, Ma X-H, Wen J-W, Yu Y, Chen C-H (2014b) Nano- Li3V2(PO4)3 enwrapped into reduced graphene oxide sheets for lithium-ion batteries. J Power Sources 265:104–109. doi: 10.1016/j.jpowsour.2014.04.04610.1016/j.jpowsour.2014.04.046 ↗
6. Cho AR, Son JN, Aravindan V, Kim H, Kang KS, Yoon WS, Lee YS (2012c) Carbon supported, Al doped- Li3V2(PO4)3 as a high rate cathode material for lithium-ion batteries. J Mater Chem 22(14):6556–6560. doi: 10.1039/c2jm00022a10.1039/c2jm00022a ↗
7. Deng C, Zhang S, Yang SY, Gao Y, Wu B, Ma L, Liu FL (2011) Effects of Ti and Mg codoping on the electrochemical performance of Li3V2(PO4)3 cathode material for lithium ion batteries. J Phys Chem C 115(30):15048–15056. doi: 10.1021/jp201686g10.1021/jp201686g ↗
8. Fergus JW (2010) Recent developments in cathode materials for lithium ion batteries. J Power Sources 195(4):939–954. doi: 10.1016/j.jpowsour.2009.08.08910.1016/j.jpowsour.2009.08.089 ↗
9. Han D-W, Lim S-J, Kim Y-I, Kang SH, Lee YC, Kang Y-M (2014) Facile lithium ion transport through superionic pathways formed on the surface of Li3V2(PO4)3/C for high power Li ion battery. Chem Mater 26(12):3644–3650. doi: 10.1021/cm500509q10.1021/cm500509q ↗
10. Hao H, Wang J, Liu J, Huang T, Yu A (2012) Synthesis, characterization and electrochemical performance of Li2FeSiO4/C cathode materials doped by vanadium at Fe/Si sites for lithium ion batteries. J Power Sources 210:397–401. doi: 10.1016/j.jpowsour.2011.11.06610.1016/j.jpowsour.2011.11.066 ↗
11. Hu M, Pang X, Zhou Z (2013) Recent progress in high-voltage lithium ion batteries. J Power Sources 237:229–242. doi: 10.1016/j.jpowsour.2013.03.02410.1016/j.jpowsour.2013.03.024 ↗
12. Jian Z, Han W, Lu X, Yang H, Hu Y-S, Zhou J, Chen L (2013) Superior electrochemical performance and storage mechanism of Na3V2(PO4)3 cathode for room-temperature sodium-ion batteries. Adv Energy Mater 3(2):156–160. doi: 10.1002/aenm.20120055810.1002/aenm.201200558 ↗
13. Jiang T, Pan W, Wang J, Bie X, Du F, Wei Y, Chen G (2010) Carbon coated Li3V2(PO4)3 cathode material prepared by a PVA assisted sol–gel method. Electrochim Acta 55(12):3864–3869. doi: 10.1016/j.electacta.2010.02.02610.1016/j.electacta.2010.02.026 ↗
14. Kim J, Yoo J-K, Jung YS, Kang K (2013) Li3V2(PO4)3/conducting polymer as a high power 4 V-class lithium battery electrode. Adv Energy Mater 3(8):1004–1007. doi: 10.1002/aenm.20130020510.1002/aenm.201300205 ↗
15. Lai C, Chen Z, Zhou H, Lu Y, Li H (2015a) Mn-doped Li3V2(PO4)3 nanocrystal with enhanced electrochemical properties based on aerosol synthesis method. J Mater Sci 50:3075–3082. doi: 10.1007/s10853-015-8867-610.1007/s10853-015-8867-6 ↗
16. Lai C, Wei J, Wang Z, Xu Q, Lu Y, Li H (2015b) Li3V2(PO4)3/(SiO2 + C) composite with better stability and electrochemical properties for lithium-ion batteries. Solid State Ionics 272:121–126. doi: 10.1016/j.ssi.2015.01.01110.1016/j.ssi.2015.01.011 ↗
17. Li G, Jiang D, Wang H, Lan X, Zhong H, Jiang Y (2014) Glucose-assisted synthesis of Na3V2(PO4)3/C composite as an electrode material for high-performance sodium-ion batteries. J Power Sources 265:325–334. doi: 10.1016/j.jpowsour.2014.04.05410.1016/j.jpowsour.2014.04.054 ↗
18. Liu H, Gao P, Fang J, Yang G (2011) Li3V2(PO4)3/graphene nanocomposites as cathode material for lithium ion batteries. Chem Commun (Camb) 47(32):9110–9112. doi: 10.1039/c1cc12941d10.1039/c1cc12941d ↗
19. Liu S, Xu J, Li D, Hu Y, Liu X, Xie K (2013) High capacity Li2MnSiO4/C nanocomposite prepared by sol–gel method for lithium-ion batteries. J Power Sources 232:258–263. doi: 10.1016/j.jpowsour.2012.12.12610.1016/j.jpowsour.2012.12.126 ↗
20. Mateyshina YG, Uvarov NF (2011) Electrochemical behavior of Li3 − xM′xV2 − yM″y(PO4)3 (M′ = K, M″ = Sc, Mg + Ti)/C composite cathode material for lithium-ion batteries. J Power Sources 196(3):1494–1497. doi: 10.1016/j.jpowsour.2010.08.07810.1016/j.jpowsour.2010.08.078 ↗
21. Padhi AK, Nanjundaswamy KS, Goodenough JB (1997) Phospho-olivines as positive-electrode materials for rechargeable lithium batteries. J Electrochem Soc 144(4):1188–1194. doi: 10.1149/1.183757110.1149/1.1837571 ↗
22. Prabu M, Selvasekarapandian S, Reddy MV, Chowdari BVR (2012) Impedance studies on the 5-V cathode material, LiCoPO4. J Solid State Electrochem 16(5):1833–1839. doi: 10.1007/s10008-012-1670-210.1007/s10008-012-1670-2 ↗
23. Qiao YQ, Wang XL, Mai YJ, Xiang JY, Zhang D, Gu CD, Tu JP (2011) Synthesis of plate-like Li3V2(PO4)3/C as a cathode material for Li-ion batteries. J Power Sources 196(20):8706–8709. doi: 10.1016/j.jpowsour.2011.06.05610.1016/j.jpowsour.2011.06.056 ↗
24. Qiao YQ, Tu JP, Wang XL, Gu CD (2012a) The low and high temperature electrochemical performances of Li3V2(PO4)3/C cathode material for Li-ion batteries. J Power Sources 199:287–292. doi: 10.1016/j.jpowsour.2011.10.05410.1016/j.jpowsour.2011.10.054 ↗
25. Qiao YQ, Wang XL, Mai YJ, Xia XH, Zhang J, Gu CD, Tu JP (2012b) Freeze-drying synthesis of Li3V2(PO4)3/C cathode material for lithium-ion batteries. J Alloy Compd 536:132–137. doi: 10.1016/j.jallcom.2012.04.11810.1016/j.jallcom.2012.04.118 ↗
26. Ren M, Zhou Z, Li Y, Gao XP, Yan J (2006) Preparation and electrochemical studies of Fe-doped Li3V2(PO4)3 cathode materials for lithium-ion batteries. J Power Sources 162(2):1357–1362. doi: 10.1016/j.jpowsour.2006.08.00810.1016/j.jpowsour.2006.08.008 ↗
27. Ren MM, Zhou Z, Gao XP, Peng WX, Wei JP (2008) Core-shell Li3V2(PO4)3@C composites as cathode materials for lithium-ion batteries. J Phys Chem C 112(14):5689–5693. doi: 10.1021/jp800040s10.1021/jp800040s ↗
28. Rui X, Yan Q, Skyllas-Kazacos M, Lim TM (2014) Li3V2(PO4)3 cathode materials for lithium-ion batteries: a review. J Power Sources 258:19–38. doi: 10.1016/j.jpowsour.2014.01.12610.1016/j.jpowsour.2014.01.126 ↗
29. Sun C, Rajasekhara S, Dong Y, Goodenough JB (2011) Hydrothermal synthesis and electrochemical properties of Li3V2(PO4)3/C-based composites for lithium-ion batteries. ACS Appl Mater Interfaces 3(9):3772–3776. doi: 10.1021/am200987y10.1021/am200987y ↗
30. Teng F, Hu Z-H, Ma X-H, Zhang L-C, Ding C-X, Yu Y, Chen C-H (2013) Hydrothermal synthesis of plate-like carbon-coated Li3V2(PO4)3 and its low temperature performance for high power lithium ion batteries. Electrochim Acta 91:43–49. doi: 10.1016/j.electacta.2012.12.09010.1016/j.electacta.2012.12.090 ↗
31. Wang D, Gao M, Pan H, Wang J, Liu Y (2014a) High performance amorphous-Si@SiOx/C composite anode materials for Li-ion batteries derived from ball-milling and in situ carbonization. J Power Sources 256:190–199. doi: 10.1016/j.jpowsour.2013.12.12810.1016/j.jpowsour.2013.12.128 ↗
32. Wang S, Zhang Z, Deb A, Yang L, Hirano S-I (2014b) Synthesis, characterization, and electrochemical performance of Ce-doped ordered macroporous Li3V2(PO4)3/C cathode materials for lithium ion batteries. Ind Eng Chem Res 53:19525–19532. doi: 10.1021/ie502917b10.1021/ie502917b ↗
33. Wang S, Zhang Z, Jiang Z, Deb A, Yang L, Hirano S-I (2014c) Mesoporous Li3V2(PO4)3@CMK-3 nanocomposite cathode material for lithium ion batteries. J Power Sources 253:294–299. doi: 10.1016/j.jpowsour.2013.12.08010.1016/j.jpowsour.2013.12.080 ↗
34. Wei Q, An Q, Chen D, Mai L, Chen S, Zhao Y, Zhang Q (2014) One-pot synthesized bicontinuous hierarchical Li3V2(PO4)3/C mesoporous nanowires for high-rate and ultralong-life lithium-ion batteries. Nano Lett 14(2):1042–1048. doi: 10.1021/nl404709b10.1021/nl404709b ↗
35. Wu F, Wang F, Wu C, Bai Y (2012) Rate performance of Li3V2(PO4)3/C cathode material and its Li+ ion intercalation behavior. J Alloy Compd 513:236–241. doi: 10.1016/j.jallcom.2011.10.02810.1016/j.jallcom.2011.10.028 ↗
36. Yin S-C, Grondey H, Strobel P, Anne M, Nazar LF (2003) Electrochemical property: structure relationships in monoclinic Li3-yV2(PO4)3. J Am Chem Soc 125(34):10402–10411. doi: 10.1021/ja034565h10.1021/ja034565h ↗
37. Zhang L-L, Liang G, Peng G, Zou F, Huang Y-H, Croft MC, Ignatov A (2012) Significantly improved electrochemical performance in Li3V2(PO4)3/C promoted by SiO2 coating for lithium-ion batteries. J Phys Chem C 116(23):12401–12408. doi: 10.1021/jp301127r10.1021/jp301127r ↗
38. Zhang L-L, Liang G, Peng G, Jiang Y, Fang H, Huang Y-H, Ignatov A (2013) Evolution of electrochemical performance in Li3V2(PO4)3/C composites caused by cation incorporation. Electrochim Acta 108:182–190. doi: 10.1016/j.electacta.2013.06.07110.1016/j.electacta.2013.06.071 ↗
39. Zhang R, Zhang Y, Zhu K, Du F, Fu Q, Yang X, Wei Y (2014) Carbon and RuO2 binary surface coating for the Li3V2(PO4)3 cathode material for lithium-ion batteries. ACS Appl Mater Interfaces 6(15):12523–12530. doi: 10.1021/am502387z10.1021/am502387z ↗