journal article·2011-06

Microstructural investigations of zirconium oxide—on core–shell structure of carbon nanotubes

Kaushik Pal, Dong Jin Kang, Jin Kuk Kim

Journal of Nanoparticle Research· Volume 13· Issue 6
Publisher page

Abstract

Single-walled carbon nanotubes and multi-walled carbon nanotubes/ZrO2 nanocomposites were obtained by isothermal hydrolyzing and chemical precipitation method for both the carbon nanotubes. The coating was taken place by dispersion of both the carbon nanotubes in ZrOCl2·8H2O aqueous solution. However, a highly conformal and uniform monoclinic zirconia coating was deposited on multi-walled carbon nanotubes rather than single-walled carbon nanotubes by this new and simple method. Also, it has been observed that the thickness of the individual carbon nanotube after zirconia coating was increased by isothermal hydrolyzing process rather than traditional chemical precipitation method and it has been confirmed by high-resolution transmission electron microscopy study.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Carbon Nanotubes in Composites · Advancements in Battery Materials · Ion-surface interactions and analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (43)

Show source-provided references
1. Antunes EF, Lobo AO, Corat EJ, Trava-airoldi VJ, Martin AA, Verissimo C (2006) Comparative study of first- and second-order Raman spectra of MWCNT at visible and infrared laser excitation. Carbon 44:2202–221110.1016/j.carbon.2006.03.003 ↗
2. Baughman RH, Zakhidov AA, de Heer WA (2002) Carbon nanotubes—the route toward applications. Science 297:787–79210.1126/science.1060928 ↗
3. Chan RHM, Fung CKM, Li WJ (2004) Rapid assembly of carbon nanotubes for nanosensing by dielectrophoretic force. Nanotechnology 15:S672–S67710.1088/0957-4484/15/10/028 ↗
4. Chang SM, Doong RA (2005) ZrO2 thin films with controllable morphology and thickness by spin-coated sol–gel method. Thin Solid Films 489:17–2210.1016/j.tsf.2005.04.076 ↗
5. Chen YY, Wei WJ (2006) Processing and characterization of ultra-thin yttria-stabilized zirconia (YSZ) electrolytic films for SOFC. Solid State Ionics 177:351–35710.1016/j.ssi.2005.10.010 ↗
6. Costa S, Borowiak-Palen E, Kruszynska M, Bachmatiuk A, Kalenczuk RJ (2008) Characterization of carbon nanotubes by Raman spectroscopy. Mater Sci Poland 26:433–442
7. Dai H (2002) Carbon nanotubes: opportunities and challenges. Surf Sci 500:218–24110.1016/S0039-6028(01)01558-8 ↗
8. Ding MQ, Shao WS, Li XH, Bai GD, Zhang FQ, Li HY et al (2005) Approach for fabricating microgated field-emission arrays with individual carbon nanotube emitters. J Appl Phys Lett 87:23311810.1063/1.2140474 ↗
9. Dresselhaus MS, Dresselhaus G, Jorio A, Filho AGS, Saito R (2002) Raman spectroscopy on isolated single wall carbon nanotubes. Carbon 40:2043–206110.1016/S0008-6223(02)00066-0 ↗
10. Eslamian M, Ahmed M, Ashgriz N (2006) Modelling of nanoparticle formation during spray pyrolysis. Nanotechnology 17:1674–168510.1088/0957-4484/17/6/023 ↗
11. Farmer DB, Gordon RG (2006) Atomic layer deposition on suspended single-walled carbon nanotubes via gas-phase noncovalent functionalization. Nano Lett 6:699–70310.1021/nl052453d ↗
12. Felten A, Bittencourt C, Pireaux JJ (2006) Gold clusters on oxygen plasma functionalized carbon nanotubes: XPS and TEM studies. Nanotechnology 17:1954–195910.1088/0957-4484/17/8/026 ↗
13. Fu L, Liu ZM, Liu YQ, Han BX, Wang JQ, Hu PA et al (2004) Coating carbon nanotubes with rare earth oxide multiwalled nanotubes. Adv Mater 16:350–35210.1002/adma.200306213 ↗
14. Guo DJ, Li HL (2005) Highly dispersed Ag nanoparticles on functional MWCNT surfaces for methanol oxidation in alkaline solution. Carbon 43:1259–126410.1016/j.carbon.2004.12.021 ↗
15. Iijima S (1991) Helical microtubules of graphitic carbon. Nature 354:56–5810.1038/354056a0 ↗
16. Ionascu C, Schaller R (2006) Influence of carbon nanotubes and silicon carbide whiskers on the mechanical loss due to grain boundary sliding in 3-mol% yttria-stabilized tetragonal zirconia polycrystals. Mater Sci Eng A 442:175–17810.1016/j.msea.2006.03.119 ↗
17. Javey A, Kim H, Brink M, Wang Q, Ural A, Guo J et al (2002) High-k dielectrics for advanced carbon-nanotube transistors and logic gates. Nat Mater 1:241–24610.1038/nmat769 ↗
18. Jitianu A, Cacciaguerra T, Benoit R, Delpeux S, Beguin F, Bonnamy S (2004) Synthesis and characterization of carbon nanotubes–TiO2 composites. Carbon 42:1147–115110.1016/j.carbon.2003.12.041 ↗
19. Korneva G, Ye HH, Gogotsi Y, Halverson D, Friedman G, Bradley JC et al (2005) Carbon nanotubes loaded with magnetic particles. Nano Lett 5:879–88410.1021/nl0502928 ↗
20. Lee SM, Oh SH, Cho WI, Jang H (2006) The effect of zirconium oxide coating on the lithium nickel cobalt oxide for lithium secondary batteries. Electrochim Acta 52:1507–151310.1016/j.electacta.2006.01.079 ↗
21. Liu SW, Wehmschulte RJ (2005) A novel hybrid of carbon nanotubes/iron nanoparticles: iron-filled nodule-containing carbon nanotubes. Carbon 43:1550–155510.1016/j.carbon.2005.02.002 ↗
22. Lu J, Zang JB, Shan SX, Wang YH (2008) Synthesis and characterization of core−shell structural MWNT−zirconia nanocomposites. Nano Lett 8:4070–407410.1021/nl801841r ↗
23. Luo TY, Liang TX, Li CS (2004) Stabilization of cubic zirconia by carbon nanotubes. Mater Sci Eng A 366:206–20910.1016/j.msea.2003.09.053 ↗
24. Lupo F, Kamalakaran R, Scheu C, Grobert N, Ruhle M (2004) Microstructural investigations on zirconium oxide–carbon nanotube hybrid materials synthesized by hydrothermal crystallization. Carbon 42:1995–199910.1016/j.carbon.2004.03.037 ↗
25. Martel R (2002) Nanotube electronics: high-performance transistors. Nat Mater 1:203–20410.1038/nmat780 ↗
26. Neagu R, Perednis D, Princivalle A, Djurado E (2006) Zirconia coatings deposited by electrostatic spray deposition: a chemical approach. Solid State Ionics 177:1451–146010.1016/j.ssi.2006.07.027 ↗
27. Ohtsu Y, Hino Y, Misawa T, Fujita H, Yukimura K, Akiyama M (2007) Influence of ion-bombardment-energy on thin zirconium oxide films prepared by dual frequency oxygen plasma sputtering. Surf Coat Technol 201:6627–663010.1016/j.surfcoat.2006.09.015 ↗
28. Pal K, Kang DJ, Zhang ZX, Kim JK (2010) Synergistic effects of zirconia-coated carbon nanotube on crystalline structure of polyvinylidene fluoride nanocomposites: electrical properties and flame-retardant behavior. Langmuir 26:3609–361410.1021/la903022j ↗
29. Rao CNR, Satishkumar BC, Govindaraj A (1997) Zirconia nanotubes. Chem Commun 1581–158210.1039/a701354j ↗
30. Saito R, Jorio A, Filho AGS, Dresselhaus G, Dresselhaus MS, Gruneis A et al (2002) First and second-order resonance Raman process in graphite and single wall carbon nanotubes. Jpn J Appl Phys 41:4878–488210.1143/JJAP.41.4878 ↗
31. Sakhno OV, Goldenberg LM, Stumpe J, Smirnova TN (2007) Mechanical testing of pyrolysed poly-furfuryl alcohol nanofibres. Nanotechnology 18:10570410.1088/0957-4484/18/10/105704 ↗
32. Shan Y, Gao L (2005) Synthesis and characterization of phase controllable ZrO2–carbon nanotube nanocomposites. Nanotechnology 16:625–63010.1088/0957-4484/16/6/001 ↗
33. Shan Y, Gao L, Yu X, Li X, Chen K (2009) Preparation and electrical characterization of carbon nanotube/ZrO2 composite ceramics. J Phys 152:012076
34. Shi SL, Liang J (2007) Electronic transport properties of multiwall carbon nanotubes/yttria-stabilized zirconia composites. J Appl Phys 101:02370810.1063/1.2430700 ↗
35. Sun J, Gao L, Iwasa M, Nakayama T, Niihara K (2005) Failure investigation of carbon nanotube/3Y-TZP nanocomposites. Ceram Int 31:1131–113410.1016/j.ceramint.2004.11.010 ↗
36. Wang YH, Li YN, Lu J, Zang JB, Huang H (2006) Microstructure and thermal characteristic of Si-coated multi-walled carbon nanotubes. Nanotechnology 17:3817–382110.1088/0957-4484/17/15/035 ↗
37. Wong EW, Sheehan PE, Lieber CM (1997) Nanobeam mechanics: elasticity, strength, and toughness of nanorods and nanotubes. Science 277:1971–197510.1126/science.277.5334.1971 ↗
38. Yang S, Song H, Chen X, Okotrub AV, Bulusheva LG (2007a) Electrochemical performance of arc-produced carbon nanotubes as anode material for lithium-ion batteries. Electrochim Acta 52:5286–529310.1016/j.electacta.2007.02.049 ↗
39. Yang YH, Wang ZJ, Yang MH, Li JS, Zheng F, Shen GL et al (2007b) Electrical detection of deoxyribonucleic acid hybridization based on carbon-nanotubes/nano zirconium dioxide/chitosan-modified electrodes. Anal Chim Acta 584:268–27410.1016/j.aca.2006.11.055 ↗
40. Yu M, Files BS, Arepalli S, Ruoff RS (2000a) Tensile loading of ropes of single wall carbon nanotubes and their mechanical properties. Phys Rev Lett 84:5552–555510.1103/PhysRevLett.84.5552 ↗
41. Yu M, Lourie O, Dyer MJ, Moloni K, Kelly TF, Ruoff RS (2000b) Strength and breaking mechanism of multiwalled carbon nanotubes under tensile load. Science 287:637–64010.1126/science.287.5453.637 ↗
42. Zhu LQ, Fang Q, He G, Liu M, Zhang LD (2005) Microstructure and optical properties of ultra-thin zirconia films prepared by nitrogen-assisted reactive magnetron sputtering. Nanotechnology 16:2865–286910.1088/0957-4484/16/12/022 ↗
43. Zhu L, Sun Y, Hess DW, Wong CP (2006) Well-aligned open-ended carbon nanotube architectures: an approach for device assembly. Nano Lett 6:243–24710.1021/nl052183z ↗