RETRACTED ARTICLE: Selective laser melting of G-surface lattice: forming process and boiling heat transfer characteristics
This record is marked as retracted by the source. Review the publisher’s notice before using its findings.
Source abstract
Abstract
In this paper, the selective laser melting (SLM) forming method was combined with the requirement of boiling heat transfer for porous structure to study the forming process and boiling heat transfer characteristics of porous structure of G-surface lattice formed by SLM. 316L stainless steel powder was used to rasterize the G-surface structure. Besides, porosity and surface morphology of G-surface lattice were analyzed. Deionized water was used for boiling heat transfer experiment to study the effect of technological parameters on boiling heat transfer enhancement. On this basis, the bubble escape modes in different stages of boiling heat transfer of G-surface lattice were considered, and the delay of the critical heat flux caused by G-surface lattice was explained. This study provides a useful reference for the design of lattice heat cooling structure.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Additive Manufacturing and 3D Printing Technologies · Cellular and Composite Structures · 3D Shape Modeling and Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (13)
Show source-provided references
1. Andersson S, Hyde ST, Larsson K, Lidin S (1988) ChemInform abstract: minimal surfaces and structures:from inorganic and metal crystals to cell membranes and biopolymers [J]. Chem Rev 88(1):221–24210.1021/cr00083a011 ↗
2. Chantarapanich N, Puttawibul P, Sucharitpwatskul S (2012) Scaffold library for tissue engineering:a geometric evaluation [J]. Comput Math Methods Med 2012(3):565–569
3. Feng Z (2017) Model lightweight method based on triply periodic minimal surface [D]. Dalian University of technology, Dalian
4. Jiang Z (2018) Parametric metaplasia and design of minimal surface [D]. Nanjing University, Nanjing
5. Lord EA, Mackay AL (2003) Periodic minimal surfaces of cubic symmetry [J]. Curr Sci 85(3):346–362
6. Maskery I, Aboulkhair NT, Aremu AO, Tuck CJ, Ashcroft IA (2017) Compressive failure modes and energy absorption in additively manufactured double gyroid lattices [J]. Addit Manuf 16:24–29
7. Melchels FPW, Barradas AMC, Van Blitterswijk CA (2010) Effects of the architecture of tissue engineering scaffolds on cell seeding and culturing [J]. Acta Biomater 6(11):4208–421710.1016/j.actbio.2010.06.012 ↗
8. Monkova K, Monka P, Zetkova I, et al (2017) Three approaches to the gyroid structure modelling as a base of lightweight component produced by additive technology [J]. 124–12910.12783/dtcse/cmsam2017/16361 ↗
9. Naing MW, Chua CK, Leong KF (2008) Computer aided tissue engineering scaffold fabrication [M]. Virtual Prototyping & Bio Manufacturing in Medical Applications. Springer US, New York, pp 67–8510.1007/978-0-387-68831-2_4 ↗
10. Qin Z, Jung GS, Kang MJ, Buehler MJ (2017) The mechanics and design of a lightweight three-dimensional graphene assembly [J]. Sci Adv 3(1):e160153610.1126/sciadv.1601536 ↗
11. Yoo DJ (2011) Porous scaffold design using the distance field and triply periodic minimal surface models [J]. Biomaterials 32(31):7741–775410.1016/j.biomaterials.2011.07.019 ↗
12. Zhang L, Stefanie F, Stephen D et al (2018) Energy absorption characteristics of metallic triply periodic minimal surface sheet structures under compressive loading [J]. Addit Manuf 23:505–515
13. Zhang C, Zhang L, Xu H, Li P, Qian B (2019) Performance of pool boiling with 3D grid structure manufactured by selective laser melting technique [J]. Int J Heat Mass Transf 128:570–58010.1016/j.ijheatmasstransfer.2018.09.021 ↗