journal article·2022-12

Effect of particle concentration on the flocculation and sedimentation of unstable Al2O3-SiO2/water hybrid nanofluid

Hongchao Li, Xiaochuan Wang, Yueqin Li, Xiaoting Wen, Yi Hu

Journal of Nanoparticle Research· Volume 24· Issue 12
Publisher page

Abstract

Hybrid nanofluids are considered to have better application prospects because of their superior thermal properties than traditional heat transfer media and single nanofluids. However, the instability problem caused by particles settling in fluids has always been hard to solve. Al2O3 and SiO2 particles with average particle sizes of 30 nm and 20 nm, respectively, were used to create Al2O3-SiO2/water hybrid nanofluids in this study. Following that, sedimentation observation, zeta potential, particle size distribution, viscosity, and absorbance were used to assess the sedimentation properties of the unstable hybrid nanofluids at various particle concentrations. The results showed that the flocculation and sedimentation of particles were cyclical and the sedimentation rate was positively correlated with the concentration. In addition, further analysis revealed that the ratios of SiO2 and Al2O3 particle concentrations in the supernatant of 0.05 wt%, 0.10 wt%, and 0.15 wt% nanofluids converged to 1:1, 1:1, and 1:3.5, respectively. The analyses indicated that at low concentrations, Al2O3 and SiO2 particles will flocculate with each other and settle together. When the concentration is higher, the Al2O3 nanoparticles with larger particle sizes will flocculate and settle first. This paper elucidates the sedimentation characteristics and mechanism of unstable hybrid nanofluids, which is expected to provide more references for practical applications.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Nanofluid Flow and Heat Transfer · Enhanced Oil Recovery Techniques · Heat and Mass Transfer in Porous Media

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (43)

Show source-provided references
1. Eastman JA, Choi US, Li S et al (1996) Enhanced thermal conductivity through the development of nanofluids. MRS Proc 457:3. https://doi.org/10.1557/PROC-457-310.1557/PROC-457-3 ↗
2. Jiménez-Pérez JL, Fuentes RG, Alvarado EM et al (2008) Enhancement of the thermal transport in a culture medium with Au nanoparticles. Appl Surf Sci 255:701–702. https://doi.org/10.1016/j.apsusc.2008.07.01210.1016/j.apsusc.2008.07.012 ↗
3. Cao C, Song Z, Su S et al (2021) Water-based nanofluid-alternating-CO2 injection for enhancing heavy oil recovery: considering oil-nanofluid emulsification. J Pet Sci Eng 205. https://doi.org/10.1016/j.petrol.2021.10893410.1016/j.petrol.2021.108934 ↗
4. Mariyate J, Bera A (2021) Recent progresses of microemulsions-based nanofluids as a potential tool for enhanced oil recovery. Fuel 306:121640. https://doi.org/10.1016/j.fuel.2021.12164010.1016/j.fuel.2021.121640 ↗
5. Aydogan-Duda N (2012) Nanotechnology: a descriptive account. Making it to the forefront: nanotechnology—a developing country perspective. Springer, New York, pp 1–710.1007/978-1-4614-1545-9 ↗
6. Yang L, Zhou F, Ji W et al (2022) An experimental study on the air refinement and heat recovery of hybrid TiO2-Ag nanofluids. J Therm Anal Calorim 147, 12047–12065. https://doi.org/10.1007/s10973-022-11403-710.1007/s10973-022-11403-7 ↗
7. Johari MNI, Zakaria IA, Azmi WH, Mohamed WANW (2022) Green bio glycol Al2O3-SiO2 hybrid nanofluids for PEMFC: the thermal-electrical-hydraulic perspectives. Int Commun Heat Mass Transfer 131:105870. https://doi.org/10.1016/j.icheatmasstransfer.2021.10587010.1016/j.icheatmasstransfer.2021.105870 ↗
8. Sadoun AM, Najjar IMR, Abd-Elwahed MS, Meselhy A (2020) Experimental study on properties of Al–Al2O3 nanocomposite hybridized by graphene nanosheets. J Market Res 9:14708–14717. https://doi.org/10.1016/j.jmrt.2020.10.01110.1016/j.jmrt.2020.10.011 ↗
9. Shaat M, Fathy A, Wagih A (2020) Correlation between grain boundary evolution and mechanical properties of ultrafine-grained metals. Mech Mater 143:103321. https://doi.org/10.1016/j.mechmat.2020.10332110.1016/j.mechmat.2020.103321 ↗
10. Sadoun AM, Najjar IR, Alsoruji GS et al (2022) Utilization of improved machine learning method based on artificial hummingbird algorithm to predict the tribological behavior of Cu-Al2O3 nanocomposites synthesized by in situ method. Mathematics 10:1266. https://doi.org/10.3390/math1008126610.3390/math10081266 ↗
11. Nikkam N, Toprak MS (2018) Fabrication and thermo-physical characterization of silver nanofluids: an experimental investigation on the effect of base liquid. Int Commun Heat Mass Transfer 91:196–200. https://doi.org/10.1016/j.icheatmasstransfer.2017.12.01710.1016/j.icheatmasstransfer.2017.12.017 ↗
12. Mohamed MM, Mahmoud NH, Farahat MA (2020) Energy storage system with flat plate solar collector and water-ZnO nanofluid. Sol Energy 202:25–31. https://doi.org/10.1016/j.solener.2020.03.06010.1016/j.solener.2020.03.060 ↗
13. Zhong D, Zhong H, Wen T (2020) Investigation on the thermal properties, heat transfer and flow performance of a highly self-dispersion TiO2 nanofluid in a multiport mini channel. Int Commun Heat Mass Transfer 117:104783. https://doi.org/10.1016/j.icheatmasstransfer.2020.10478310.1016/j.icheatmasstransfer.2020.104783 ↗
14. Wongcharee K, Eiamsa-ard S (2011) Enhancement of heat transfer using CuO/water nanofluid and twisted tape with alternate axis. Int Commun Heat Mass Transfer 38:742–748. https://doi.org/10.1016/j.icheatmasstransfer.2011.03.01110.1016/j.icheatmasstransfer.2011.03.011 ↗
15. Fedele L, Colla L, Bobbo S (2012) Viscosity and thermal conductivity measurements of water-based nanofluids containing titanium oxide nanoparticles. Int J Refrig 35:1359–1366. https://doi.org/10.1016/j.ijrefrig.2012.03.01210.1016/j.ijrefrig.2012.03.012 ↗
16. Beck MP, Yuan Y, Warrier P, Teja AS (2010) The thermal conductivity of alumina nanofluids in water, ethylene glycol, and ethylene glycol + water mixtures. J Nanopart Res 12:1469–1477. https://doi.org/10.1007/s11051-009-9716-910.1007/s11051-009-9716-9 ↗
17. Megatif L, Ghozatloo A, Arimi A, Shariati-Niasar M (2016) Investigation of laminar convective heat transfer of a novel TiO2-carbon nanotube hybrid water-based nanofluid. Exp Heat Transfer 29:124–138. https://doi.org/10.1080/08916152.2014.97397410.1080/08916152.2014.973974 ↗
18. Botha SS, Ndungu P, Bladergroen BJ (2011) Physicochemical properties of oil-based nanofluids containing hybrid structures of silver nanoparticles supported on silica. Ind Eng Chem Res 50:3071–3077. https://doi.org/10.1021/ie101088x10.1021/ie101088x ↗
19. Jha N, Ramaprabhu S (2009) Thermal conductivity studies of metal dispersed multiwalled carbon nanotubes in water and ethylene glycol based nanofluids. J Appl Phys 106. https://doi.org/10.1063/1.324030710.1063/1.3240307 ↗
20. Suresh S, Venkitaraj KP, Selvakumar P, Chandrasekar M (2011) Synthesis of Al2O3-Cu/water hybrid nanofluids using two step method and its thermo physical properties. Colloids Surf A Physicochem Eng Asp 388:41–48. https://doi.org/10.1016/j.colsurfa.2011.08.00510.1016/j.colsurfa.2011.08.005 ↗
21. Minea AA (2017) Hybrid nanofluids based on Al2O3, TiO2 and SiO2: numerical evaluation of different approaches. Int J Heat Mass Transf 104:852–860. https://doi.org/10.1016/j.ijheatmasstransfer.2016.09.01210.1016/j.ijheatmasstransfer.2016.09.012 ↗
22. Zawawi NNM, Azmi WH, Sharif MZ, Najafi G (2019) Experimental investigation on stability and thermo-physical properties of Al2O3–SiO2/PAG nanolubricants with different nanoparticle ratios. J Therm Anal Calorim 135:1243–1255. https://doi.org/10.1007/s10973-018-7670-410.1007/s10973-018-7670-4 ↗
23. Xuan Y, Li Q, Hu W (2003) Aggregation Structure and Thermal Conductivity of Nanofluids. AIChE Journal 49:1038–104310.1002/aic.690490420 ↗
24. Esfahani MBB, Mohammad Sajadi S, Abu-Hamdeh NH et al (2022) The effect of sedimentation phenomenon of the additives silver nanoparticles on water pool boiling heat transfer coefficient: a comprehensive experimental study. J Mol Liq 345:117891. https://doi.org/10.1016/j.molliq.2021.11789110.1016/j.molliq.2021.117891 ↗
25. Borzuei M, Baniamerian Z (2020) Role of nanoparticles on critical heat flux in convective boiling of nanofluids: nanoparticle sedimentation and Brownian motion. Int J Heat Mass Transf 150:119299. https://doi.org/10.1016/j.ijheatmasstransfer.2019.11929910.1016/j.ijheatmasstransfer.2019.119299 ↗
26. Sadeghi R, Etemad SG, Keshavarzi E, Haghshenasfard M (2015) Investigation of alumina nanofluid stability by UV–vis spectrum. Microfluid Nanofluidics 18:1023–1030. https://doi.org/10.1007/s10404-014-1491-y10.1007/s10404-014-1491-y ↗
27. Qi C, Wang G, Ma Y, Guo L (2017) Experimental research on stability and natural convection of TiO2-water nanofluid in enclosures with different rotation angles. Nanoscale Res Lett 12:396. https://doi.org/10.1186/s11671-017-2170-110.1186/s11671-017-2170-1 ↗
28. Das PK, Mallik AK, Ganguly R, Santra AK (2018) Stability and thermophysical measurements of TiO2 (anatase) nanofluids with different surfactants. J Mol Liq 254:98–107. https://doi.org/10.1016/j.molliq.2018.01.07510.1016/j.molliq.2018.01.075 ↗
29. He YT, Wan J, Tokunaga T (2008) Kinetic stability of hematite nanoparticles: the effect of particle sizes. J Nanopart Res 10:321–332. https://doi.org/10.1007/s11051-007-9255-110.1007/s11051-007-9255-1 ↗
30. Ezhenkova SI (2017) Mathematical modeling of sedimentation of nanoparticles in the vessel of finite depth. Nanosystems: Phys Chem Math 8:236–238. https://doi.org/10.17586/2220-8054-2017-8-2-236-23810.17586/2220-8054-2017-8-2-236-238 ↗
31. Giorgi F, Macko P, Curran JM et al (2021) Settling dynamics of nanoparticles in simple and biological media. R Soc Open Sci 8(11). https://doi.org/10.1098/rsos.21006810.1098/rsos.210068 ↗
32. Kourki H, Famili MHN (2012) Particle sedimentation: effect of polymer concentration on particle-particle interaction. Powder Technol 221:137–143. https://doi.org/10.1016/j.powtec.2011.12.05010.1016/j.powtec.2011.12.050 ↗
33. Kim HJ, Lee SH, Lee JH, Jang SP (2015) Effect of particle shape on suspension stability and thermal conductivities of water-based bohemite alumina nanofluids. Energy 90:1290–1297. https://doi.org/10.1016/j.energy.2015.06.08410.1016/j.energy.2015.06.084 ↗
34. Sundar LS, Singh MK, Sousa ACM (2013) Thermal conductivity of ethylene glycol and water mixture based Fe3O4 nanofluid. Int Commun Heat Mass Transfer 49:17–24. https://doi.org/10.1016/j.icheatmasstransfer.2013.08.02610.1016/j.icheatmasstransfer.2013.08.026 ↗
35. Mohamed A, Mohammed M, Ibrahim A, El-Kady OA (2020) Effect of nano Al2O3 coated Ag reinforced Cu matrix nanocomposites on mechanical and tribological behavior synthesis by P/M technique. J Compos Mater 54:4921–4928. https://doi.org/10.1177/002199832093486010.1177/0021998320934860 ↗
36. Abd-Elwahed MS, Ibrahim AF, Reda MM (2020) Effects of ZrO2 nanoparticle content on microstructure and wear behavior of titanium matrix composite. J Market Res 9:8528–8534. https://doi.org/10.1016/j.jmrt.2020.05.02110.1016/j.jmrt.2020.05.021 ↗
37. Hwang Y, Lee JK, Lee CH et al (2007) Stability and thermal conductivity characteristics of nanofluids. Thermochim Acta 455:70–74. https://doi.org/10.1016/j.tca.2006.11.03610.1016/j.tca.2006.11.036 ↗
38. Hanaor D, Michelazzi M, Leonelli C, Sorrell CC (2012) The effects of carboxylic acids on the aqueous dispersion and electrophoretic deposition of ZrO2. J Eur Ceram Soc 32:235–244. https://doi.org/10.1016/j.jeurceramsoc.2011.08.01510.1016/j.jeurceramsoc.2011.08.015 ↗
39. Shahsavar A, Salimpour MR, Saghafian M, Shafii MB (2015) An experimental study on the effect of ultrasonication on thermal conductivity of ferrofluid loaded with carbon nanotubes. Thermochim Acta 617:102–110. https://doi.org/10.1016/j.tca.2015.08.02510.1016/j.tca.2015.08.025 ↗
40. Kim HJ, Bang IC, Onoe J (2009) Characteristic stability of bare Au-water nanofluids fabricated by pulsed laser ablation in liquids. Opt Lasers Eng 47:532–538. https://doi.org/10.1016/j.optlaseng.2008.10.01110.1016/j.optlaseng.2008.10.011 ↗
41. Ali N, Teixeira JA, Addali A (2018) A review on nanofluids: fabrication, stability, and thermophysical properties. J Nanomater 2018. https://doi.org/10.1155/2018/697813010.1155/2018/6978130 ↗
42. Wang BX, Li CH, Peng XF (2003) Stability of nano-particle suspensions. Basic Sci Eng 168–173. https://www.webofscience.com/wos/alldb/full-record/CSCD:1341800
43. Cui Z (2019) Fundamentals of surfactants, colloids, and interface chemistry. Chem Ind Press