Preparation and electrochemical performance of LiFePO4−x F x /C nanorods by room-temperature solid-state reaction and microwave heating
Source abstract
Abstract
LiFePO4−x F x /C nanorods were prepared by room-temperature solid-state reaction and microwave heating. The structure and morphology of the as-prepared materials were analyzed by X-ray diffractometry and transmission electron microscopy. The results shows that the LiFePO4−x F x /C were well crystallized and consisted of nanoparticles with an average diameter of ten to several tens of nanometers, many round grains constituted solid rod-like structure. The length of the rods can be up to several hundreds of nanometers, and their diameters are around 100 nm. The results of electrochemical testing show that the initial discharge capacity of LiFePO3.85F0.15/C is 124.7 mAh g−1, with a negligible fading after 50 cycles at a constant current density of 1 C at room temperature. The capacity retention rate is 99.5 %, which is higher than that of LiFePO4/C prepared by the same method. The doping of F helps improve electrical conductivity and Li+ diffusion of LiFePO4/C. This study may provide new insights and understanding on the effect of F-doping on the electrochemical performance of LiFePO4/C.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Advanced Battery Technologies Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (9)
Show source-provided references
1. Chung S-Y, Bloking JT, Chiang Y-M (2002) Electronically conductive phospho-olivines as lithium storage electrodes. Nat Mater 1(2):123–12810.1038/nmat732 ↗
2. Huang Y, Li D, Jia D, Guo Z, Miao M, Cho WI (2011a) Preparation and characterization of Ag/C nanocables-modified nanosized C–LiFePO4. J Nanopart Res 13:4815–482010.1007/s11051-011-0458-0 ↗
3. Huang Y, Jiang R, Jia D, Guo Z (2011b) Preparation, microstructure and electrochemical performance of nanoparticles LiMn2O3.9Br0.1. Mater Lett 65:3486–348810.1016/j.matlet.2011.07.091 ↗
4. Li D, Huang Y, Jia D, Guo Z, Bao S-J (2010) Synthesis and electrochemical properties of nanosized carbon-coated Li1−3x La x FePO4 composites. J Solid State Electrochem 14:889–89510.1007/s10008-009-0875-5 ↗
5. Liao X-Z, He Y-S, Ma Z-F, Zhang X-M, Wang L (2007) Effects of fluorine-substitution on the electrochemical behavior of LiFePO4/C cathode materials. J Power Sources 174:720–72510.1016/j.jpowsour.2007.06.146 ↗
6. Padhi AK, Nanjundaswamy KS, Goodenough JB (1997) Phospho-olivines as positive-electrode materials for rechargeable lithium batteries. J Electrochem Soc 144(4):1188–119410.1149/1.1837571 ↗
7. Pan F, Wang W-l (2011) Synthesis and characterization of core–shell F-doped LiFePO4/C composite for lithium-ion batteries. J Solid State Electrochem. doi: 10.1007/s10008-011-1544-z
8. Wang L, Huang Y, Jiang R, Jia D (2007) Preparation and characterization of nano-sized LiFePO4 by low heating solid-state coordination method and microwave heating. Electrochim Acta 52(24):6778–678310.1016/j.electacta.2007.04.104 ↗
9. Wang Y, Wang Y, Hosono E, Wang K, Zhou H (2008) The design of a LiFePO4/carbon nanocomposite with a core–shell structure and its synthesis by an in situ polymerization restriction method. Angew Chem Int Ed 47(39):7461–746510.1002/anie.200802539 ↗