Measurement of the dynamic behavior of thin poly(N-isopropylacrylamide) hydrogels and their phase transition temperatures measured using reflectometric interference spectroscopy
Source abstract
Abstract
Temperature-responsive cell culture surfaces prepared by modifying tissue-culture polystyrene with nanoscale poly(N-isopropylacrylamide) (PIPAAm) hydrogels are widely used as intelligent surfaces for the fabrication of various cell sheets that change with temperature. In this work, the characteristics of nanoscale PIPAAm hydrogels were phenomenologically elucidated on the basis of time-dependent surface evaluations under conditions of changing temperature. Because the dynamic characteristics of the nanoscale hydrogel did not exhibit good performance, the nanoscale PIPAAm hydrogel was analyzed by monitoring its temperature-dependent dynamic swelling/deswelling changes using reflectometric interference spectroscopy (RIfS) on an instrument equipped with a microfluidic system. RIfS measurements under ambient atmosphere provided the precise physical thickness of the dry PIPAAm hydrogel (6.7 nm), which agreed with the atomic force microscopy results (6.6 nm). Simulations of the reflectance spectra revealed that changes in the wavelength of the minimum reflectance (Δλ) were attributable to the changes in the refractive index of the thin PIPAAm hydrogel induced by a temperature-dependent volume phase transition. The temperature-dependent Δλ change was used to monitor the swelling/deswelling behavior of the nanoscale PIPAAm hydrogel. In addition, the phase transition temperature of the thin PIPAAm hydrogel under aqueous conditions was also determined to be the inflection point of the plot of the change in Δλ as a function of temperature. The dynamic behavior of a thin PIPAAm hydrogel chemically deposited on a surface was readily analyzed using a new analytical system with RIfS and microfluidic devices.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Hydrogels: synthesis, properties, applications · 3D Printing in Biomedical Research · Polymer Surface Interaction Studies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (23)
Show source-provided references
1. Akiyama Y, Kikuchi A, Yamato M, Okano T (2004) Ultrathin poly(N-isopropylacrylamide) grafted layer on polystyrene surfaces for cell adhesion/detachment control. Langmuir 20(13):5506–551110.1021/la036139f ↗
2. Akiyama Y, Kushida A, Yamato M, Kikuchi A, Okano T (2007) Surface characterization of poly(N-isopropylacrylamide) grafted tissue culture polystyrene by electron beam irradiation, using atomic force microscopy, and X-ray photoelectron spectroscopy. J Nanosci Nanotechnol 7(3):796–80210.1166/jnn.2007.509 ↗
3. Akizuki T, Oda S, Komaki M, Tsuchioka H, Kawakatsu N, Kikuchi A, Yamato M, Okano T, Ishikawa I (2005) Application of periodontal ligament cell sheet for periodontal regeneration: a pilot study in beagle dogs. J Periodontal Res 40(3):245–25110.1111/j.1600-0765.2005.00799.x ↗
4. Bae YH, Okano T, Kim SW (1990) Temperature dependence of swelling of crosslinked poly(N,N-alkyl substituted acrylamides) in water. J Polym Sci Part B 28(6):923–93610.1002/polb.1990.090280609 ↗
5. Balamurugan S, Mendez S, Balamurugan SS, O’Brien MJ, Lopez GP (2003) Thermal response of poly(N-isopropylacrylamide) brushes probed by surface plasmon resonance. Langmuir 19(7):2545–254910.1021/la026787j ↗
6. Bohanon T, Elender G, Knoll W, Koberle P, Lee JS, Offenhausser A, Ringsdorf H, Sackmann E, Simon J, Tovar G et al (1996) Neural cell pattern formation on glass and oxidized silicon surfaces modified with poly(N-isopropylacrylamide). J Biomater Sci Polym Ed 8(1):19–3910.1163/156856297X00551 ↗
7. Born M, Wolf E (2002) Principles of optics: electromagnetics theory of propagation, interface and diffraction of light. Cambridge University Press, Cambridge
8. Fujiwara H (2007) Spectroscopic ellipsometry: principles and applications, Wiley, NY, 170 and 349–35210.1002/9780470060193 ↗
9. Fukumori K, Akiyama Y, Yamato M, Kobayashi J, Sakai K, Okano T (2009) Temperature-responsive glass coverslips with an ultrathin poly(N-isopropylacrylamide) layer. Acta Biomater 5(1):470–47610.1016/j.actbio.2008.06.018 ↗
10. Fukumori K, Akiyama Y, Kumashiro Y, Kobayashi J, Yamato M, Sakai K, Okano T (2010) Characterization of ultra-thin temperature-responsive polymer layer and its polymer thickness dependency on cell attachment/detachment properties. Macromol Biosci 10(10):1117–112910.1002/mabi.201000043 ↗
11. Hirokawa Y, Tanaka T (1984) Volume phase transition in a nonionic gel. J Chem Phys 81(12):6379–638010.1063/1.447548 ↗
12. Ishida N, Biggs S (2007) Direct observation of the phase transition for a poly(n-isopropylacryamide) layer grafted onto a solid surface by AFM and QCM-D. Langmuir 23:11083–1108810.1021/la701461b ↗
13. Ishida N, Biggs S (2010) Effect of grafting density on phase transition behavior for poly(n-isopropylacryamide) brushes in aqueous solutions studied by AFM and QCM-D. Macromolecules 43:7269–727610.1021/ma101113g ↗
14. Kurihara Y, Takama M, Sekiya T, Yoshihara Y, Ooya T, Takeuchi T (2012) Fabrication of carboxylated silicon nitride sensor chips for detection of antigen-antibody reaction using microfluidic reflectometric interference spectroscopy. Langmuir 28(38):13609–1361510.1021/la302221y ↗
15. Macleod HA (2010) Thin-film optical filters, 4th edn. CRC Press, London, pp 13–7110.1201/9781420073034-c2 ↗
16. Naini CA, Franzka S, Frost S, Ulbricht M, Hartmann N (2011) Probing the intrinsic switching kinetics of ultrathin thermoresponsive polymer brushes. Angew Chem Int Ed 50:4513–451610.1002/anie.201100140 ↗
17. Nishida K, Yamato M, Hayashida Y, Watanabe K, Yamamoto K, Adachi E, Nagai S, Kikuchi A, Maeda N, Watanabe H et al (2004) Corneal reconstruction with tissue-engineered cell sheets composed of autologous oral mucosal epithelium. N Engl J Med 351(12):1187–119610.1056/NEJMoa040455 ↗
18. Okano T, Yamada N, Sakai H, Sakurai Y (1993) A novel recovery system for cultured cells using plasma-treated polystyrene dishes grafted with poly(N-isopropylacrylamide). J Biomed Mater Res 27(10):1243–125110.1002/jbm.820271005 ↗
19. Rahane SB, Floyd JA, Metters AT, Kilbey SM (2008) Swelling behavior of multiresponsive poly(methacrylic acid)-block–poly(N-isopropylacrylamide) brushes synthesized using surface-initiated photoiniferter-mediated photopolymerization. Adv Funct Mater 18:1232–124010.1002/adfm.200701411 ↗
20. Shimizu T, Yamato M, Kikuchi A, Okano T (2003) Cell sheet engineering for myocardial tissue reconstruction. Biomaterials 24(13):2309–231610.1016/S0142-9612(03)00110-8 ↗
21. Stefan EK, Sui X, Hempenius MA, Zandvliet HJW, Vancso GJ (2012) Probing the thermal collapse of poly(N-isopropylacrylamide) grafts by quantitative in situ ellipsometry. J Phys Chem B 116(30):9261–926810.1021/jp304364m ↗
22. Yakushiji T, Sakai K, Kikuchi A, Aoyagi T, Sakurai Y, Okano T (1999) Effects of cross-linked structure on temperature-responsive hydrophobic interaction of poly(N-isopropylacrylamide) hydrogel-modified surfaces with steroids. Anal Chem 71(6):1125–113010.1021/ac980677t ↗
23. Yamada N, Okano T, Sakai H, Karikusa F, Sawasaki Y, Sakurai Y (1990) Thermo-responsive polymeric surfaces; control of attachment and detachment of cultured cells. Macromol Rapid Commun 11(11):571–57610.1002/marc.1990.030111109 ↗