Ultrasonic-induced synthesis of high surface area colloids CeO2–ZrO2
Source abstract
Abstract
The nanostructures of high surface area ceria–zirconia colloids have been successfully synthesized via a sonochemical method in the presence of polyethylene glycol 600. Their structural characteristics have been investigated using powder XRD, FESEM, BET surface area, TG, and other techniques. The average size of CeO2–ZrO2 nanoparticles is estimated to be 3.7 nm using Debye–Scherrer’s equation. The BET analysis indicates that colloids CeO2–ZrO2 have a remarkably high surface area of 226 m2 g−1.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Catalytic Processes in Materials Science · Catalysis and Oxidation Reactions · Radioactive element chemistry and processing
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (12)
Show source-provided references
1. Cabanas A, Darr JA, Lester E et al (2001) Continuous hydrothermal synthesis of inorganic materials in a near-critical water flow reactor; the one-step synthesis of nano-particulate Ce1–xZrxO2(x = 0–1) solid solutions. J Mater Chem 11:561–568. doi: 10.1039/b008095k10.1039/b008095k ↗
2. Izu N, Kishimoto H, Omata T et al (2000) Electrical conductivity of novel tetragonal t′ meta-(Ce0.5Zr0.5)O2 phase prepared by reduction and successive oxidation of t′ phase. J Solid State Chem 151:253–25910.1006/jssc.2000.8648 ↗
3. Kaspar J, Fornasiero P, Graziani M (1999) Use of CeO2-based oxides in the three-way catalysis. Catal Today 50:285–298. doi: 10.1016/S0920-5861(98)00510-010.1016/S0920-5861(98)00510-0 ↗
4. Kawamura K, Watanabe K, Hiramatsu T et al (2001) Electrical conductivities of CaO doped ZrO2–CeO2 solid solution system. Solid State Ion 144:11–18. doi: 10.1016/S0167-2738(01)00892-X10.1016/S0167-2738(01)00892-X ↗
5. Lamas DG, Lascalea GE, Juarez RE et al (2003) Metastable forms of the tetragonal phase in compositionally homogeneous, nanocrystalline zirconia–ceria powders synthesised by gel-combustion. J Mater Chem 13:904–910. doi: 10.1039/b210500b10.1039/b210500b ↗
6. Mamontov E, Egami T, Brezny R et al (2000) Lattice defects and oxygen storage capacity of nanocrystalline ceria and ceria–zirconia. J Phys Chem B 104:11110–11116. doi: 10.1021/jp002301110.1021/jp0023011 ↗
7. Ozawa M, Kimura M, Isogai A (1993) The application of Ce–Zr oxide solid solution to oxygen storage promoters in automotive catalysts. J Alloys Comp 193:73–75. doi: 10.1016/0925-8388(93)90314-D10.1016/0925-8388(93)90314-D ↗
8. Ranga Rao G, Kaspar J, Meriani S et al (1994) NO decomposition over partially reduced metallized CeO2–ZrO2 solid solution. Catal Lett 24:107–112. doi: 10.1007/BF0080738010.1007/BF00807380 ↗
9. Reddy BM, Lakshmanan P, Khan A et al (2005) Structural characterization of CeO2–ZrO2/TiO2 and V2O5/CeO2–ZrO2/TiO2 mixed oxide catalysts by XRD, Raman spectroscopy, HREM, and other techniques. J Phys Chem B 109:1781–1787. doi: 10.1021/jp045723+10.1021/jp045723+ ↗
10. Rossignol S, Gerard F, Duprez D (1999) Effect of the preparation method on the properties of zirconia-ceria materials. J Mater Chem 9:1615–1620. doi: 10.1039/a900536f10.1039/a900536f ↗
11. Sugiura M (2003) Oxygen storage materials for automotive catalysts: ceria–zirconia solid solutions. Catal Surv Asia 7:77–87. doi: 10.1023/A:102348870952710.1023/A:1023488709527 ↗
12. Yu JC, Zhang L, Lin J (2003) Direct sonochemical preparation of high-surface-area nanoporous ceria and ceria–zirconia solid solutions. J Colloid Interface Sci 260:240–243. doi: 10.1016/S0021-9797(02)00168-610.1016/S0021-9797(02)00168-6 ↗