Transport properties of nano manganese ferrite–propylene glycol dispersion (nanofluids): new observations and discussion
Source abstract
Abstract
Experiments were conducted on the preparation of manganese ferrite nanoparticles and their surface modification for dispersion in propylene glycol. The appropriate concentrations of ferrous sulphate and manganese sulphate (precursors) for synthesis of uniform Mn0.43Fe2.57O4 nanoparticles (size range ~20–25 nm) were found to be 0.05 and 0.025 M, respectively. These nanoparticles were coated with citric acid and dispersed in propylene glycol for the preparation of nanofluids. The effects of temperature and nanoparticle concentration on nanofluid viscosity and thermal conductivity have been studied. Our study on the influence of nanoparticle concentration on viscosity reveals the existence of a viscosity minimum for 0.25 vol% of citric acid-modified Mn0.43Fe2.57O4–propylene glycol nanofluid. A thermal conductivity enhancement of 68 % was observed for 2 vol% nanofluid. Correlating viscosity and thermal conductivity measurements, particle clustering seems to be the major factor responsible for thermal conductivity enhancement.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Nanofluid Flow and Heat Transfer · Power Transformer Diagnostics and Insulation · Magnetic Properties and Synthesis of Ferrites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (46)
Show source-provided references
1. Bellusci M, Aliotta C, Fiorani D, La Barbera A, Padella F, Peddis D, Pilloni M, Secci D (2012) Manganese iron oxide superparamagnetic powder by mechanochemical processing. Nanoparticles functionalization and dispersion in a nanofluid. J Nanopart Res 14:904. doi: 10.1007/s11051-012-0904-710.1007/s11051-012-0904-7 ↗
2. Carta D, Casula MF, Floris P, Falqui A, Mountjoy G, Boni A, Sangregorio C, Corrias A (2010) Synthesis and microstructure of manganese ferrite colloidal nanocrystals. Phys Chem Chem Phys 12:5074–5083. doi: 10.1039/b922646j10.1039/b922646j ↗
3. Chen H, Ding Y, Tan C (2007) Rheological behaviour of nanofluids. New J Phys 9:367. doi: 10.1088/1367-2630/9/10/36710.1088/1367-2630/9/10/367 ↗
4. Chen H, Ding Y, Lapkin A, Fan X (2009) Rheological behaviour of ethylene glycol-titanate nanotube nanofluids. J Nanopart Res 11:1513–1520. doi: 10.1007/s11051-009-9599-910.1007/s11051-009-9599-9 ↗
5. Choi SUS (1995) Enhancing thermal conductivity of fluids with nanoparticles, developments and applications of non-newtonian flows. In: Siginer DA, Wang HP (eds) FED vol. 231/MD-Vol 66. ASME, New York, pp 99–105
6. Chung SJ, Leonard JP, Nettleship I, Lee JK, Soong Y, Martello DV, Chyu MK (2009) Characterization of ZnO nanoparticle suspension in water: effectiveness of ultrasonic dispersion. Powder Technol 194:75–80. doi: 10.1016/j.powtec.2009.03.02510.1016/j.powtec.2009.03.025 ↗
7. Duangthongsuk W, Wongwises S (2009) Measurement of temperature-dependent thermal conductivity and viscosity of TiO2-water nanofluids. Exp Therm Fluid Sci 33:706–714. doi: 10.1016/j.expthermflusci.2009.01.00510.1016/j.expthermflusci.2009.01.005 ↗
8. Giri AK, Pellerin K, Pongsaksawad W, Sorescu M, Majetich S (2000) Effect of light on the magnetic properties of cobalt ferrite nanoparticles. IEEE Trans Magn 36:3029–3031. doi: 10.1109/20.90866610.1109/20.908666 ↗
9. Goldman A (1993) Modern ferrite technology. Marcel Dekker, New York
10. Han DH, Luo HL, Yang Z (1996) Remanent and anisotropic switching field distribution of platelike Ba-ferrite and acicular particulate recording media. J Magn Magn Mater 161:376–378. doi: 10.1016/S0304-8853(96)00263-610.1016/S0304-8853(96)00263-6 ↗
11. Indhuja A, Suganthi KS, Manikandan S, Rajan KS (2013) Viscosity and thermal conductivity of dispersions of gum arabic capped MWCNT in water: influence of MWCNT concentration and temperature. J Taiwan Inst Chem Eng 44:474–479. doi: 10.1016/j.jtice.2012.11.01510.1016/j.jtice.2012.11.015 ↗
12. Karthikeyan NR, Philip J, Raj B (2008) Effect of clustering on the thermal conductivity of nanofluids. Mater Chem Phys 109:50–55. doi: 10.1016/j.matchemphys.2007.10.02910.1016/j.matchemphys.2007.10.029 ↗
13. KD2 Pro Thermal Properties Analyzer, Operator’s Manual (2006) Version 4, Decagon devices, USA
14. Keblinski P, Phillpot SR, Choi SUS, Eastman JA (2002) Mechanisms of heat flow in suspensions of nano-sized particles (nanofluids). Int J Heat Mass Transf 45(2002):855–863. doi: 10.1016/S0017-9310(01)00175-210.1016/S0017-9310(01)00175-2 ↗
15. Kole M, Dey TK (2011) Effect of aggregation on the viscosity of copper oxide-gear oil nanofluids. J Therm Sci 50:1741–1747. doi: 10.1016/j.ijthermalsci.2011.03.02710.1016/j.ijthermalsci.2011.03.027 ↗
16. Kwak K, Kim C (2005) Viscosity and thermal conductivity of copper oxide nanofluid dispersed in ethylene glycol. Korea-Aust Rheol J 17:35–40
17. Lee S, Choi SUS, Li S, Eastman JA (1999) Measuring thermal conductivity of fluids containing oxide nanoparticles. J Heat Transf 121:280–289. doi: 10.1115/1.282597810.1115/1.2825978 ↗
18. Lee J, Gharagozloo PE, Kolade B, Eaton JK, Goodson KE (2010) Nanofluid convection in microtubes. J Heat Transf 132:092401. doi: 10.1115/1.400163710.1115/1.4001637 ↗
19. Liu Y, Gao L, Guo J (2001) Comparative study on the stabilizing effect of 2-phosphonobutane-1,2,4-tricarboxylic acid and citric acid for alumina suspensions. Colloid Surface A 193:187–195. doi: 10.1016/S0927-7757(01)00749-X10.1016/S0927-7757(01)00749-X ↗
20. Longo GA, Zilio C (2011) Experimental measurement of thermophysical properties of oxide–water nano-fluids down to ice-point. Exp Therm Fluid Sci 35(7):1313–1324. doi: 10.1016/j.expthermflusci.2011.04.01910.1016/j.expthermflusci.2011.04.019 ↗
21. Manikandan S, Karthikeyan N, Silambarasan M, Rajan KS (2012a) Sub-micron dispersions of sand in water prepared by stirred bead milling and ultrasonication: a potential coolant. Appl Therm Eng 44:1–10. doi: 10.1016/j.applthermaleng.2012.04.00410.1016/j.applthermaleng.2012.04.004 ↗
22. Manikandan S, Karthikeyan N, Silambarasan M, Suganthi KS, Rajan KS (2012b) Preparation and characterization of sub-micron dispersions of sand in ethylene glycol-water mixture. Braz J Chem Eng 29:699–712. doi: 10.1590/S0104-6632201200040000310.1590/S0104-66322012000400003 ↗
23. Mozaffari M, Behdadfar B, Amighian J (2008) Preparation and characterization of manganese ferrite nanoparticles via co-precipitation method for hyperthermia. Iran J Pharm Sci 4:115–118
24. Namburu PK, Kulkarni DP, Misra D, Das DK (2007) Viscosity of copper oxide nanoparticles dispersed in ethylene glycol and water mixture. Exp Therm Fluid Sci 32:397–402. doi: 10.1016/j.expthermflusci.2007.05.00110.1016/j.expthermflusci.2007.05.001 ↗
25. Naresh Y, Dhivya A, Suganthi KS, Rajan KS (2012) High-temperature thermo-physical properties of novel CuO-therminol®55 nanofluids. Nanosci Nanotechnol Lett 4:1209–1213. doi: 10.1166/nnl.2012.145410.1166/nnl.2012.1454 ↗
26. Nguyen CT, Galanis N, Polidori G, Fohanno S, Popa CV, Bechec AL (2009) An experimental study of a confined and submerged impinging jet heat transfer using Al2O3-water nanofluid. Int J Therm Sci 48(2):401–411. doi: 10.1016/j.ijthermalsci.2008.10.00710.1016/j.ijthermalsci.2008.10.007 ↗
27. Parekh K, Lee HS (2012) Experimental investigation of thermal conductivity of magnetic nanofluids. AIP Conf Proc 1447:385–386. doi: 10.1063/1.471004110.1063/1.4710041 ↗
28. Philip J, Shima PD, Raj B (2008) Evidence for enhanced thermal conduction through percolating structures in nanofluids. Nanotechnology 19:305706. doi: 10.1088/0957-4484/19/30/30570610.1088/0957-4484/19/30/305706 ↗
29. Phuoc TX, Massoudi M (2009) Experimental observations of the effects of shear rates and particle concentration on the viscosity of Fe2O3–deionized water nanofluids. Int J Therm Sci 48:1294–1301. doi: 10.1016/j.ijthermalsci.2008.11.01510.1016/j.ijthermalsci.2008.11.015 ↗
30. Prasher R, Song D, Wang J, Phelan P (2006) Measurements of nanofluid viscosity and its implications for thermal applications. Appl Phys Lett 89:133108. doi: 10.1063/1.235611310.1063/1.2356113 ↗
31. Rohini Priya K, Suganthi KS, Rajan KS (2012) Transport properties of ultra-low concentration CuO–water nanofluids containing non-spherical nanoparticles. Int J Heat Mass Transf 55:4734–4743. doi: 10.1016/j.ijheatmasstransfer.2012.04.03510.1016/j.ijheatmasstransfer.2012.04.035 ↗
32. Shima PD, Philip J, Raj B (2010) Influence of aggregation on thermal conductivity in stable and unstable nanofluids. Appl Phys Lett 97:153113. doi: 10.1063/1.349728010.1063/1.3497280 ↗
33. Silambarasan M, Manikandan S, Rajan KS (2012) Viscosity and thermal conductivity of dispersions of sub-micron TiO2 particles in water prepared by stirred bead milling and ultrasonication. Int J Heat Mass Transf 55:7991–8002. doi: 10.1016/j.ijheatmasstransfer.2012.08.03010.1016/j.ijheatmasstransfer.2012.08.030 ↗
34. Suganthi KS, Rajan KS (2012) Temperature induced changes in ZnO–water nanofluid: zeta potential, size distribution and viscosity profiles. Int J Heat Mass Transf 55:7969–7980. doi: 10.1016/j.ijheatmasstransfer.2012.08.03210.1016/j.ijheatmasstransfer.2012.08.032 ↗
35. Suganthi KS, Parthasarathy M, Rajan KS (2013) Liquid-layering induced, temperature-dependent thermal conductivity enhancement in ZnO–propylene glycol nanofluids. Chem Phys Lett 561–562:120–124. doi: 10.1016/j.cplett.2013.01.04410.1016/j.cplett.2013.01.044 ↗
36. Syam Sundar L, Naik MT, Sharma KV, Singh MK, Siva Reddy TCh (2012) Experimental investigation of forced convection heat transfer and friction factor in a tube with Fe3O4 magnetic nanofluid. Exp Therm Fluid Sci 37:65–71. doi: 10.1016/j.expthermflusci.2011.10.00410.1016/j.expthermflusci.2011.10.004 ↗
37. Tan Y, Song Y, Zheng Q (2012) Hydrogen bonding-driven rheological modulation of chemically reduced graphene oxide/poly(vinyl alcohol) suspensions and its application in electrospinning. Nanoscale 4:6997–7005. doi: 10.1039/c2nr32160b10.1039/c2nr32160b ↗
38. Tomitaka A, Hirukawa A, Yamada T, Morishita S, Takemura Y (2009) Biocompatibility of various ferrite nanoparticles evaluated by in vitro cytotoxicity assays using HeLa cells. J Magn Magn Mater 321:1482–1484. doi: 10.1016/j.jmmm.2009.02.05810.1016/j.jmmm.2009.02.058 ↗
39. Tseng SR, Meng HF, Yeh CH, Lai HC, Horng SF, Liao HH, Hsu CS, Lin LC (2008) High-efficiency blue multilayer polymer light-emitting diode fabricated by a general liquid buffer method. Synth Met 158:130–134. doi: 10.1016/j.synthmet.2007.12.01610.1016/j.synthmet.2007.12.016 ↗
40. Vajjha RS, Das DK, Kulkarni DP (2010) Development of new correlations for convective heat transfer and friction actor in turbulent regime for nanofluids. Int J Heat Mass Transf 53:4607–4618. doi: 10.1016/j.ijheatmasstransfer.2010.06.03210.1016/j.ijheatmasstransfer.2010.06.032 ↗
41. Vékás L, Bica D, Marinica O (2006) Magnetic nanofluids stabilized with various chain length surfactants. Romanian Rep Phys 58:257–267
42. Wang B, Wang B, Wei P, Wang X, Lou W (2012) Controlled synthesis and size-dependent thermal conductivity of Fe3O4 magnetic nanofluids. Dalton Trans 41:896–899. doi: 10.1039/C1DT11222H10.1039/C1DT11222H ↗
43. White SB, Shih AJM, Pipe KP (2011) Investigation of the electrical conductivity of propylene glycol-based ZnO nanofluids. Nanoscale Res Lett 6:346. doi: 10.1186/1556-276X-6-34610.1186/1556-276X-6-346 ↗
44. Witharana S, Palabiyik I, Musina Z, Ding Y (2013) Stability of glycol nanofluids—the theory and experiment. Powder Technol 239:72–77. doi: 10.1016/j.powtec.2013.01.03910.1016/j.powtec.2013.01.039 ↗
45. Wong KV, Leon OD (2010) Applications of nanofluids: current and future. Adv Mech Eng 2010:519659. doi: 10.1155/2010/51965910.1155/2010/519659 ↗
46. Zhang J, Xu Q, Ye F, Lin Q, Jiang D, Iwasa M (2006) Effect of citric acid on the adsorption behavior of polyethylene imine (PEI) and the relevant stability of SiC slurries. Colloid Surfaces A 276:168–175. doi: 10.1016/j.colsurfa.2005.10.03810.1016/j.colsurfa.2005.10.038 ↗