Facile spray drying approach to synthesize Sb2Se3/rGO composite anode for lithium-ion battery
Source abstract
Abstract
Novel Sb2Se3/reduced graphene oxide (rGO) composite, 1D Sb2Se3 nanorods wrapped with rGO, has been successfully synthesized by a facile spray drying method. Compared to as-prepared Sb2Se3 nanorods, the obtained Sb2Se3/rGO composite, as anode for lithium-ion batteries (LIBs), exhibited super electrochemical performances. The results suggest that Sb2Se3/rGO composite can retain a reversible capacity of 394 mAh g−1 over 200 cycles at 100 mA g−1 between 0.01 and 3 V (vs Li/Li+). Even at a high rate current density of 1000 mA g−1, a discharge capacity of 247 mAh g−1 was computed, indicating that this LIB possesses good rate capability. This improved electrochemical performance can be attributed to the 1D nanostructure, and also to the introduction of rGO, which provided more electron transport pathways and shortened the Li-ion diffusion through the electrolyte. Consequently, the cluster of 1D Sb2Se3 nanorods that are wrapped in the rGO nanostructure can efficiently buffer large volume changes and retain the structural stability during lithiation and delithiation process, resulting in an excellent electrochemical performance.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Advanced Battery Technologies Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (49)
Show source-provided references
1. Broux T, Bamine T, Fauth F, Simonelli L, Olszewski W, Marini C, Ménétrier M, Carlier D, Masquelier C, Croguennec L (2016) Strong impact of the oxygen content in Na3V2(PO4)2F3−yOy (0≤y≤0.5) on its structural and electrochemical properties. Chem Mater 28:7683–7692. https://doi.org/10.1021/acs.chemmater.6b0265910.1021/acs.chemmater.6b02659 ↗
2. Cao Y, Xiao L, Sushko ML, Wang W, Schwenzer B, Xiao J, Nie Z, Saraf LV, Yang Z, Liu J (2012) Sodium ion insertion in hollow carbon nanowires for battery applications. Nano Lett 12:3783–3787. https://doi.org/10.1021/nl301695710.1021/nl3016957 ↗
3. Chaudhari S, Srinivasan M (2012) 1D hollow α-Fe2O3 electrospun nanofibers as high performance anode material for lithium ion batteries. J Math Chem 22:23049–23056. https://doi.org/10.1039/C2JM32989A10.1039/C2JM32989A ↗
4. Chen Y, Li X, Park K, Zhou L, Huang H, Mai YW, Goodenough JB (2016a) Hollow nanotubes of N-doped carbon on CoS. Angew Chem Int Ed 55:15831–15834. https://doi.org/10.1002/anie.20160848910.1002/anie.201608489 ↗
5. Chen YM, Yu L, Lou XW (2016b) Hierarchical tubular structures composed of Co3O4 hollow composites and carbon nanotubes for lithium storage. Angew Chem Int Ed 55:5990–5993. https://doi.org/10.1002/anie.20160013310.1002/anie.201600133 ↗
6. Chiang MY, Chang SH, Chen CY, Yuan FW, Tuan HY (2011) Quaternary CuIn(S1-xSex)2 nanocrystals: facile heating-up synthesis, band gap tuning, and gram-scale production. J Phys Chem C 115:1592–1599. https://doi.org/10.1021/jp109073510.1021/jp1090735 ↗
7. Choi JH, Ha CW, Choi HY, Shin HC, Park CM, Jo YN, Lee SM (2016) Sb2S3 embedded in amorphous P/C composite matrix as high-performance anode material for sodium ion batteries. Electrochim Acta 210:588–595. https://doi.org/10.1016/j.electacta.2016.05.19010.1016/j.electacta.2016.05.190 ↗
8. Embden JV, Tachibana Y (2012) Synthesis and characterization of famatinite copper antimony sulfide nanocrystals. J Mater Chem 22:11466–11469. https://doi.org/10.1039/C2JM32094K10.1039/C2JM32094K ↗
9. Fan SF, Sun T, Rui TH, Yan QY, Hng HH (2012) Cooperative enhancement of capacities in nanostructured SnSb/carbon nanotube network composite as anode for lithium ion batteries. J Power Sources 201:288–293. https://doi.org/10.1016/j.jpowsour.2011.10.13710.1016/j.jpowsour.2011.10.137 ↗
10. Hou H, Jing M, Yang Y, Zhang Y, Zhu Y, Song W, Yang X, Ji X (2015) Sb porous hollow microspheres as advanced anode materials for sodium-ion batteries. J Mater Chem A 3(6):2971–2977. https://doi.org/10.1039/C4TA06476C10.1039/C4TA06476C ↗
11. Hwang SS, Chang GC, Kim H (2010) Polymer microsphere embedded Si/graphite composite anode material for lithium rechargeable battery. Electrochim Acta 55:3236–3239. https://doi.org/10.1016/j.electacta.2010.01.04410.1016/j.electacta.2010.01.044 ↗
12. Iqbal S, Bahadur A, Saeed A, Zhou K, Shoaib M, Waqas M (2017) Electrochemical performance of 2D polyaniline anchored CuS/graphene nano-active composite as anode material for lithium-ion battery. J Colloid Interface Sci 502:16–23. https://doi.org/10.1016/j.jcis.2017.04.08210.1016/j.jcis.2017.04.082 ↗
13. Jiang H, Hu Y, Guo S, Yan C, Lee PS, Li C (2014) Rational design of MnO/carbon nanopeapods with internal void space for high-rate and long-life Li-ion batteries. ACS Nano 8:6038–6046. https://doi.org/10.1021/nn501310n10.1021/nn501310n ↗
14. Jiang J, Nie P, Ding B, Wu W, Chang Z, Wu Y, Dou H, Zhang X (2016) Effect of graphene modified Cu current collector on the performance of Li4Ti5O12 anode for lithium-ion batteries. ACS Appl Mater Interfaces 8:30926–30932. https://doi.org/10.1021/acsami.6b1003810.1021/acsami.6b10038 ↗
15. Kong J, Wei H, Xia D, Yu P (2016) High-performance Sb2S3/Sb anode materials for Li-ion batteries. Mater Lett 179:114–117. https://doi.org/10.1016/j.matlet.2016.05.02810.1016/j.matlet.2016.05.028 ↗
16. Larcher D, Tarascon JM (2015) Towards greener and more sustainable batteries for electrical energy storage. Nat Chem 7:19–29. https://doi.org/10.1038/NCHEM.208510.1038/NCHEM.2085 ↗
17. Li SJ, Zhao ZC, Liu QH, Huang LJ, Wang G, Pan DC, Zhang HJ, He XQ (2011) Alloyed (ZnSe)x(CuInSe2)1-x and CuInSexS2-x nanocrystals with a monophase zinc blende structure over the entire composition range. Inorg Chem 50:11958–11964. https://doi.org/10.1021/ic201083r10.1021/ic201083r ↗
18. Liang Y, Li Y, Wang H, Zhou J, Wang J, Regier T, Dai H (2011) Co3O4 nanocrystals on graphene as a synergistic catalyst for oxygen reduction reaction. Nat Mater 10:780–786. https://doi.org/10.1038/nmat308710.1038/nmat3087 ↗
19. Liu Z, Yu XY, Lou XW, Paik U (2016) Sb@C coaxial nanotubes as a superior long-life and high-rate anode for sodium ion batteries. Energy Environ Sci 9:2314–2318. https://doi.org/10.1039/C6EE01501H10.1039/C6EE01501H ↗
20. Lopes I, Piao LY, Stievano L, Lambert JF (2009) Adsorption of amino acids on oxide supports: a solid-state NMR study of glycine adsorption on silica and alumina. J Phys Chem C 113:18163–18172. https://doi.org/10.1021/jp906891y10.1021/jp906891y ↗
21. Luo W, Calas A, Tang C, Li F, Zhou L, Mai L (2016) Ultralong Sb2Se3 nanowire based free-standing membrane anode for lithium/sodium ion batteries. ACS Appl Mater Interfaces 8:35219–35226. https://doi.org/10.1021/acsami.6b1154410.1021/acsami.6b11544 ↗
22. Luo W, Li F, Li Q, Wang X, Yang W, Zhou L, Mai L (2018) Heterostructured Bi2S3-Bi2O3 nanosheets with a built-in electric field for improved sodium storage. ACS Appl Mater Interfaces 10:7201–7202. https://doi.org/10.1021/acsami.8b0161310.1021/acsami.8b01613 ↗
23. Ma J, Wang Y, Wang Y, Chen Q, Lian J, Zheng W (2009) Controlled synthesis of one-dimensional Sb2Se3 nanostructures and their electrochemical properties. J Phys Chem C 113:13588–13592. https://doi.org/10.1021/jp902952k10.1021/jp902952k ↗
24. Ma X, Luo W, Yan M, He L, Mai L (2016) In-situ characterization of electrochemical processes in one dimensional nanomaterials for energy storages devices. Nano Energy 24:165–188. https://doi.org/10.1016/j.nanoen.2016.03.02310.1016/j.nanoen.2016.03.023 ↗
25. Nie P, Liu X, Fu R, Wu Y, Jiang J, Dou H, Zhang X (2017) Mesoporous silicon anodes by using polybenzimidazole derived pyrrolic N-enriched carbon toward high-energy Li-ion batteries. ACS Energy Lett 2:1279–1287. https://doi.org/10.1021/acsenergylett.7b0028610.1021/acsenergylett.7b00286 ↗
26. Ou X, Yang CH, Xiong XH, Zheng FH, Pan QC, Jin C, Liu ML, Huang K (2017) A new RGO-overcoated Sb2Se3 nanorods anode for Na+ battery: in situ X-ray diffraction study on a live sodiation/desodiation process. Adv Funct Mater 27:1606242. https://doi.org/10.1002/adfm.20160624210.1002/adfm.201606242 ↗
27. Paireau C, Jouanneau S, Ammar MR, Simon P, Béguin F, Raymundo-Piñero E (2015) Si/C composites prepared by spray drying from cross-linked polyvinyl alcohol as Li-ion batteries anodes. Electrochim Acta 174:361–368. https://doi.org/10.1016/j.electacta.2015.06.01610.1016/j.electacta.2015.06.016 ↗
28. Peng Y, Le Z, Wen M, Zhang D, Chen Z, Wu HB, Li H, Lu Y (2017) Mesoporous single-crystal-like TiO2 mesocages threaded with carbon nanotubes for high-performance electrochemical energy storage. Nano Energy 35:44–51. https://doi.org/10.1016/j.nanoen.2017.03.00310.1016/j.nanoen.2017.03.003 ↗
29. Prikhodchenko PV, Gun J, Sladkevich S, Mikhaylov AA, Lev O, Tay YY, Batabyal SK, Yu DYW (2012) Conversion of hydroperoxoantimonate coated graphenes to Sb2S3@graphene for a superior lithium battery anode. Chem Mater 24:4750–4757. https://doi.org/10.1021/cm303181810.1021/cm3031818 ↗
30. Ru Q, Chen XQ, Wang B, Guo Q, Wang Z, Hou XH, Hu SJ (2017) Biological carbon skeleton of lotus-pollen surrounded by rod-like Sb2S3 as anode material in lithium ion battery. Mater Lett 198:57–60. https://doi.org/10.1016/j.matlet.2017.03.18010.1016/j.matlet.2017.03.180 ↗
31. Tan YM, Chen LJ, Chen H, Hou QL, Chen XH (2017) Synthesis of a symmetric bundle-shaped Sb2O3 and its application for anode materials in lithium ion batteries. Mater Lett 212:103–106. https://doi.org/10.1016/j.matlet.2017.10.08010.1016/j.matlet.2017.10.080 ↗
32. Wan F, Guo JZ, Zhang XH, Zhang JP, Sun HZ, Yan QY, Han DX, Niu L, Wu XL (2016) In situ binding Sb nanospheres on graphene via oxygen bonds as superior anode for ultrafast sodium-ion batteries. ACS Appl Mater Interfaces 8:7790–7799. https://doi.org/10.1021/acsami.5b1224210.1021/acsami.5b12242 ↗
33. Wang JW, Deng ZX, Li YD (2002) Synthesis and characterization of Sb2Se3 nanorods. Mater Res Bull 37:495–502. https://doi.org/10.1016/S0025-5408(02)00675-X10.1016/S0025-5408(02)00675-X ↗
34. Wang DB, Yu DB, Shao MW, Xing JY, Qian YT (2003) Growth of Sb2Se3 whiskers via a hydrothermal method. Mater Chem Phys 82:546–550. https://doi.org/10.1016/S0254-0584(03)00337-710.1016/S0254-0584(03)00337-7 ↗
35. Wang YX, Chou SL, Kim JH, Liu HK, Dou SX (2013) Nanocomposites of silicon and carbon derived from coal tar pitch: cheap anode materials for lithium-ion batteries with long cycle life and enhanced capacity. Electrochim Acta 93:213–221. https://doi.org/10.1016/j.electacta.2013.01.09210.1016/j.electacta.2013.01.092 ↗
36. Wang XL, Li G, Seo MH, Hassan FM, Hoque MA, Chen ZW (2015) Sulfur atoms bridging few-layered MoS2 with S-doped graphene enable highly robust anode for lithium-ion batteries. Adv Energy Mater 5:1501106. https://doi.org/10.1002/aenm.20150110610.1002/aenm.201501106 ↗
37. Xue MZ, Fu ZW (2008) Pulsed laser deposited Sb2Se3 anode for lithium-ion batteries. J Alloys Compd 458:351–356. https://doi.org/10.1016/j.jallcom.2007.03.10910.1016/j.jallcom.2007.03.109 ↗
38. Yang Y, Qiao B, Yang X, Fang L, Pan C, Song W, Hou H, Ji X (2014) Lithium titanate tailored by cathodically induced graphene for an ultrafast lithium ion battery. Adv Funct Mater 24:4349–4356. https://doi.org/10.1002/adfm.20130426310.1002/adfm.201304263 ↗
39. Yang X, Zhang RY, Chen N, Meng X, Yang PL, Wang CZ, Zhang YQ, Wei YJ, Chen G, Du F (2016) Assembly of SnSe composites confined in graphene for enhanced sodium-ion storage performance. Chem Eur J 22:1445–1451. https://doi.org/10.1002/chem.20150407410.1002/chem.201504074 ↗
40. Yi Z, Han QG, Cheng Y, Wu YM, Wang LM (2016a) Facile synthesis of symmetric bundle-like Sb2S3 micron-structures and their application in lithium-ion battery anodes. Chem Commun 52:7691–7694. https://doi.org/10.1039/c6cc03176e10.1039/c6cc03176e ↗
41. Yi Z, Han Q, Zan P, Wu Y, Cheng Y, Wang L (2016b) Sb composites encapsulated into porous carbon matrixes for high-performance lithium-ion battery anodes. J Power Sources 331:16–21. https://doi.org/10.1016/j.jpowsour.2016.09.02710.1016/j.jpowsour.2016.09.027 ↗
42. Yu Y, Wang RH, Chen Q, Peng LM (2006) High-quality ultralong Sb2Se3 and Sb2S3 nano-ribbons on a large scale via a simple chemical route. J Phys Chem 110:13415–13419. https://doi.org/10.1021/jp061599d10.1021/jp061599d ↗
43. Yu DYW, Hoster HE, Batabyal SK (2014) Bulk antimony sulphide with excellent cycle stability as next-generation anode for lithium-ion batteries. Sci Rep 4:4562. https://doi.org/10.1038/srep0456210.1038/srep04562 ↗
44. Zhang H, Song H, Chen X, Zhou J, Zhang H (2012) Preparation and electrochemical performance of SnO2@carbon nanotube core–shell structure composites as anode material for lithium-ion batteries. Electrochim Acta 59:160–167. https://doi.org/10.1016/j.electacta.2011.10.05510.1016/j.electacta.2011.10.055 ↗
45. Zhang YG, Zhao Y, Knoarov A, Gosselink D, Li Z, Ghaznavi M, Chen P (2013a) One-pot approach to synthesize PPY@S core-shell composite cathode for Li/S batteries. J Nanopart Res 15:2007. https://doi.org/10.1007/s11051-013-2007-510.1007/s11051-013-2007-5 ↗
46. Zhang YG, Zhao Y, Knoarov A, Gosselink D, Soboleski HG, Chen P (2013b) A novel sulfur/polypyrrole/multi-walled carbon nanotube composite cathode with core-shell tubular structure for lithium rechargeable batteries. Solid State Ionics 238:30–35. https://doi.org/10.1016/j.ssi.2013.03.00610.1016/j.ssi.2013.03.006 ↗
47. Zhang YG, Zhao Y, Bakenov Z, Konarov A, Chen P (2014) Preparation of novel network nanostructured sulfur composite cathode with enhanced stable cycle performance. J Power Sources 270:326–331. https://doi.org/10.1016/j.jpowsour.2014.07.09610.1016/j.jpowsour.2014.07.096 ↗
48. Zhang KL, Li XN, Liang JW, Zhu YC, Hu L, Cheng QS, Guo C, Lin N, Qian YT (2015) Nitrogen-doped porous interconnected double-shelled hollow carbon spheres with high capacity for lithium ion batteries and sodium ion batteries. Electrochim Acta 155:174–182. https://doi.org/10.1016/j.electacta.2014.12.10810.1016/j.electacta.2014.12.108 ↗
49. Zhang YG, Wei YQ, Li HP, Zhao Y, Yin FX (2016) Simple fabrication of free-standing ZnO/graphene/carbon nanotube composite anode for lithium-ion batteries. Mater Lett 184:235–238. https://doi.org/10.1016/j.matlet.2016.08.01710.1016/j.matlet.2016.08.017 ↗