Preparation and capacitive properties of lithium manganese oxide intercalation compound
Source abstract
Abstract
Lithium manganese oxide intercalation compound (Li0.7MnO2) supported on titanium nitride nanotube array (TiN NTA) was applied as cathode electrode material for lithium-ion supercapacitor application. Li0.7MnO2/TiN NTA was fabricated through electrochemical deposition and simultaneous intercalation process using TiN NTA as a substrate, Mn(CH3COO)2 as manganese source, and Li2SO4 as lithium source. The morphology and microstructure of the Li0.7MnO2/TiN NTA were characterized by scanning electron microscopy and X-ray diffraction analysis. The electrochemical performance of the Li0.7MnO2/TiN NTA was investigated by electrochemical impedance spectroscopy, cyclic voltammetry, and galvanostatic charge/discharge measurements. Li0.7MnO2/TiN NTA exhibited higher capacitive performance in Li2SO4 electrolyte solution rather than that in Na2SO4 electrolyte solution, which was due to the different intercalation effects of lithium-ion and sodium-ion. The specific capacitance was improved from 503.3 F g−1 for MnO2/TiN NTA to 595.0 F g−1 for Li0.7MnO2/TiN NTA at a current density of 2 A g−1 in 1.0 M Li2SO4 electrolyte solution, which was due to the intercalation of lithium-ion for Li0.7MnO2. Li0.7MnO2/TiN NTA also kept 90.4 % capacity retention after 1000 cycles, presenting a good cycling stability. An all-solid-state lithium-ion supercapacitor was fabricated and showed an energy density of 82.5 Wh kg−1 and a power density of 10.0 kW kg−1.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Supercapacitor Materials and Fabrication · Advancements in Battery Materials · Advanced Battery Materials and Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (45)
Show source-provided references
1. Aravindan V, Mhamane D, Ling WC, Ogale S, Madhavi S (2013) Nonaqueous lithium-ion capacitors with high energy densities using trigol-reduced graphene oxide nanosheets as cathode-active material. Chemsuschem 6:2240–2244. doi: 10.1002/cssc.20130046510.1002/cssc.201300465 ↗
2. Brandt A, Balducci A (2013) A study about the use of carbon coated iron oxide-based electrodes in lithium-ion capacitors. Electrochim Acta 108:219–225. doi: 10.1016/j.electacta.2013.06.07610.1016/j.electacta.2013.06.076 ↗
3. Choi D, Kumta PN (2006) Nanocrystalline TiN derived by a two-step halide approach for electrochemical capacitors. J Electrochem Soc 153:A2298–A2303. doi: 10.1149/1.235969210.1149/1.2359692 ↗
4. Dong SM et al (2011) Facile preparation of mesoporous titanium nitride microspheres for electrochemical energy storage. ACS Appl Mater Interface 3:93–98. doi: 10.1021/am100951h10.1021/am100951h ↗
5. Du H, Xie Y, Xia C, Wang W, Tian F (2014a) Electrochemical capacitance of polypyrrole-titanium nitride and polypyrrole-titania nanotube hybrids. New J Chem 38:1284–1293. doi: 10.1039/c3nj01286g10.1039/c3nj01286g ↗
6. Du H, Xie Y, Xia C, Wang W, Tian F, Zhou Y (2014b) Preparation of a flexible polypyrrole nanoarray and its capacitive performance. Mater Lett 132:417–420. doi: 10.1016/j.matlet.2014.06.14010.1016/j.matlet.2014.06.140 ↗
7. Gong KP, Yu P, Su L, Xiong SX, Mao LQ (2007) Polymer-assisted synthesis of manganese dioxide/carbon nanotube nanocomposite with excellent electrocatalytic activity toward reduction of oxygen. J Phys Chem C 111:1882–1887. doi: 10.1021/jp062863610.1021/jp0628636 ↗
8. Grey CP, Dupre N (2004) NMR studies of cathode materials for lithium-ion rechargeable batteries. Chem Rev 104:4493–4512. doi: 10.1021/cr020734p10.1021/cr020734p ↗
9. Huang B, Jang YI, Chiang YM, Sadoway DR (1998) Electrochemical evaluation of LiCoO2 synthesized by decomposition and intercalation of hydroxides for lithium-ion battery applications. J Appl Electrochem 28:1365–1369. doi: 10.1023/a:100344310868110.1023/A:1003443108681 ↗
10. Huang ZF, Zhang HZ, Wang CZ, Wang DP, Meng X, Ming X, Chen G (2009) First-principles investigation on extraction of lithium ion from monoclinic LiMnO2. Solid State Sci 11:271–274. doi: 10.1016/j.solidstatesciences.2008.06.00510.1016/j.solidstatesciences.2008.06.005 ↗
11. Kweon HJ, Kim SS, Kim GB, Park DG (1998) Syntheses of LiMn2O4, LiCoO2 and LiNi0.8Co0.2O2 by the PVA-precursor method and their use as a cathode in the lithium-ion rechargeable battery. J Mater Sci Lett 17:1697–1701. doi: 10.1023/a:100661083179910.1023/A:1006610831799 ↗
12. Liu ZH, Kang LP, Zhao MZ, Ooi K (2007) Preparation, ion-exchange, and electrochemical behavior of Cs-type manganese oxides with a novel hexagonal-like morphology. J Mater Res 22:2437–2447. doi: 10.1557/jmr.2007.030210.1557/jmr.2007.0302 ↗
13. Lu XH et al (2012) Stabilized TiN nanowire arrays for high-performance and flexible supercapacitors. Nano Lett 12:5376–5381. doi: 10.1021/nl302761z10.1021/nl302761z ↗
14. Luo JY, Cheng L, Xia YY (2007) LiMn2O4 hollow nanosphere electrode material with excellent cycling reversibility and rate capability. Electrochem Commun 9:1404–1409. doi: 10.1016/j.elecom.2007.01.05810.1016/j.elecom.2007.01.058 ↗
15. Mai LQ et al (2013) Fast ionic diffusion-enabled nanoflake electrode by spontaneous electrochemical pre-intercalation for high-performance supercapacitor. Sci Rep 3:1718. doi: 10.1038/srep0171810.1038/srep01718 ↗
16. Najafpour MM, Pashaei B, Nayeri S (2012) Calcium manganese(IV) oxides: biomimetic and efficient catalysts for water oxidation. Dalton Trans 41:4799–4805. doi: 10.1039/c2dt12189a10.1039/c2dt12189a ↗
17. Park MS, Lim YG, Kim JH, Kim YJ, Cho J, Kim JS (2011) A novel lithium-doping approach for an advanced lithium ion capacitor. Adv Energy Mater 1:1002–1006. doi: 10.1002/aenm.20110027010.1002/aenm.201100270 ↗
18. Qu QT, Zhang P, Wang B, Chen YH, Tian S, Wu YP, Holze R (2009) Electrochemical performance of MnO2 nanorods in neutral aqueous electrolytes as a cathode for asymmetric supercapacitors. J Phys Chem C 113:14020–14027. doi: 10.1021/jp811309410.1021/jp8113094 ↗
19. Ramadoss A, Kim SJ (2014) Hierarchically structured TiO2@MnO2 nanowall arrays as potential electrode material for high-performance supercapacitors. Int J Hydrog Energy 39:12201–12212. doi: 10.1016/j.ijhydene.2014.05.11810.1016/j.ijhydene.2014.05.118 ↗
20. Rettew RE, Sauerbrey M, Cheng S, Alamgir F (2011) Surface-architecture-determined electrochemistry of Pt on Au, TiO2, CeO2, and MnO2 surfaces. In: Abstracts of papers of the American chemical society, vol 242
21. Sherrill SA, Duay J, Gui Z, Banerjee P, Rubloff GW, Lee SB (2011) MnO2/TiN heterogeneous nanostructure design for electrochemical energy storage. Phys Chem Chem Phys 13:15221–15226. doi: 10.1039/c1cp21815h10.1039/c1cp21815h ↗
22. Sivakkumar SR, Pandolfo AG (2012) Evaluation of lithium-ion capacitors assembled with pre-lithiated graphite anode and activated carbon cathode. Electrochim Acta 65:280–287. doi: 10.1016/j.electacta.2012.01.07610.1016/j.electacta.2012.01.076 ↗
23. Smith PH, Tran TN, Jiang TL, Chung J (2013) Lithium-ion capacitors: electrochemical performance and thermal behavior. J Power Sources 243:982–992. doi: 10.1016/j.jpowsour.2013.06.01210.1016/j.jpowsour.2013.06.012 ↗
24. Tian F, Xie YB, Du HX, Zhou YZ, Xia C, Wang W (2014) Preparation and electrochemical capacitance of graphene/titanium nitride nanotube array. RSC Adv 4:41856–41863. doi: 10.1039/c4ra05020g10.1039/C4RA05020G ↗
25. Tiano AL et al (2015) Correlating size and composition-dependent effects with magnetic, Mossbauer, and pair distribution function measurements in a family of catalytically active ferrite nanoparticles. Chem Mater 27:3572–3592. doi: 10.1021/acs.chemmater.5b0076710.1021/acs.chemmater.5b00767 ↗
26. Van der Ven A, Ceder G (2001) Lithium diffusion mechanisms in layered intercalation compounds. J Power Sources 97–8:529–531. doi: 10.1016/s0378-7753(01)00638-310.1016/S0378-7753(01)00638-3 ↗
27. Van der Ven A, Bhattacharya J, Belak AA (2013) Understanding Li diffusion in Li-intercalation compounds. Acc Chem Res 46:1216–1225. doi: 10.1021/ar200329r10.1021/ar200329r ↗
28. Xia C, Xie Y, Wang Y, Wang W, Du H, Tian F (2013) Preparation and capacitance performance of polyaniline/titanium nitride nanotube hybrid. J Appl Electrochem 43:1225–1233. doi: 10.1007/s10800-013-0610-x10.1007/s10800-013-0610-x ↗
29. Xia C, Xie Y, Wang W, Du H (2014) Fabrication and electrochemical capacitance of polyaniline/titanium nitride core-shell nanowire arrays. Synth Met 192:93–100. doi: 10.1016/j.synthmet.2014.03.01810.1016/j.synthmet.2014.03.018 ↗
30. Xia C, Xie Y, Du H, Wang W (2015) Ternary nanocomposite of polyaniline/manganese dioxide/titanium nitride nanowire array for supercapacitor electrode. J Nanopart Res 17:30. doi: 10.1007/s11051-014-2855-7
31. Xiao XL, Wang L, Wang DS, He XM, Peng Q, Li YD (2009) Hydrothermal synthesis of orthorhombic LiMnO2 nano-particles and LiMnO2 nanorods and comparison of their electrochemical performances. Nano Res 2:923–930. doi: 10.1007/s12274-009-9094-810.1007/s12274-009-9094-8 ↗
32. Xie Y, Du H (2015) Electrochemical capacitance of carbon quantum dots-polypyrrole titania nanotube hybrid. RSC Adv 5:89689–89697. doi: 10.1039/C5RA16538E10.1039/C5RA16538E ↗
33. Xie Y, Fang X (2014) Electrochemical flexible supercapacitor based on manganese dioxide-titanium nitride nanotube hybrid. Electrochim Acta 120:273–283. doi: 10.1016/j.electacta.2013.12.10310.1016/j.electacta.2013.12.103 ↗
34. Xie Y, Zhan Y (2015) Electrochemical capacitance of porous reduced graphene oxide/nickel foam. J Porous Mater 22:403–412. doi: 10.1007/s10934-015-9909-910.1007/s10934-015-9909-9 ↗
35. Xie Y, Wang Y, Du H (2013) Electrochemical capacitance performance of titanium nitride nanoarray. Mater Sci Eng B 178:1443–1451. doi: 10.1016/j.mseb.2013.09.00510.1016/j.mseb.2013.09.005 ↗
36. Xie Y, Wang D, Zhou Y, Du H, Xia C (2014) Supercapacitance of polypyrrole/titania/polyaniline coaxial nanotube hybrid. Synth Met 198:59–66. doi: 10.1016/j.synthmet.2014.09.02910.1016/j.synthmet.2014.09.029 ↗
37. Xie Y, Du H, Xia C (2015a) Porous poly(3,4-ethylenedioxythiophene) nanoarray used for flexible supercapacitor. Microporous Mesoporous Mater 204:163–172. doi: 10.1016/j.micromeso.2014.11.02110.1016/j.micromeso.2014.11.021 ↗
38. Xie Y, Song F, Du H, Xia C (2015b) Preparation of carbon-coated lithium iron phosphate/titanium nitride for a lithium-ion supercapacitor. New J Chem 39:604–613. doi: 10.1039/c4nj01169d10.1039/C4NJ01169D ↗
39. Xie Y, Xia C, Du H, Wang W (2015c) Enhanced electrochemical performance of polyaniline/carbon/titanium nitride nanowire array for flexible supercapacitor. J Power Sources 286:561–570. doi: 10.1016/j.jpowsour.2015.04.02510.1016/j.jpowsour.2015.04.025 ↗
40. Yan J et al (2010) Electrochemical properties of graphene nanosheet/carbon black composites as electrodes for supercapacitors. Carbon 48:1731–1737. doi: 10.1016/j.carbon.2010.01.01410.1016/j.carbon.2010.01.014 ↗
41. Yu HY, Wu JH, Fan LQ, Xu KQ, Zhong X, Lin YZ, Lin JM (2011) Improvement of the performance for quasi-solid-state supercapacitor by using PVA-KOH-KI polymer gel electrolyte. Electrochim Acta 56:6881–6886. doi: 10.1016/j.electacta.2011.06.03910.1016/j.electacta.2011.06.039 ↗
42. Yu Y, Zhang B, He YB, Huang ZD, Oh SW, Kim JK (2013) Mechanisms of capacity degradation in reduced graphene oxide/alpha-MnO2 nanorod composite cathodes of Li-air batteries. J Mater Chem A 1:1163–1170. doi: 10.1039/c2ta00426g10.1039/C2TA00426G ↗
43. Yu MH et al (2015) Holey tungsten oxynitride nanowires: novel anodes efficiently integrate microbial chemical energy conversion and electrochemical energy storage. Adv Mater 27:3085–3091. doi: 10.1002/adma.20150049310.1002/adma.201500493 ↗
44. Yuan AB, Zhang QL (2006) A novel hybrid manganese dioxide/activated carbon supercapacitor using lithium hydroxide electrolyte. Electrochem Commun 8:1173–1178. doi: 10.1016/j.elecom.2006.05.01810.1016/j.elecom.2006.05.018 ↗
45. Zhuang QC, Xu SD, Qiu XY, Cui YL, Fang LA, Sun SG (2010) Diagnosis of electrochemical impedance spectroscopy in lithium ion batteries. Prog Chem 22:1044–1057