Influence of acidity on the catalytic performance of Ni2P in liquid-phase hydrodeoxygenation of furfural to 2-methylfuran
Source abstract
Abstract
A series of nickel phosphide catalysts with adjustable Bronsted acid sites and Lewis acid sites has been prepared by liquid-phase method using bis(triphenylphosphine) nickel dichloride as “all-in-one” precursors. The catalysts were characterized by XRD, TEM, 31P magic angle spinning (MAS) NMR, XPS, and NH3-TPD; then, its catalytic performance was tested in the liquid-phase hydrodeoxygenation of furfural to 2-methylfuran. The full furfural conversion and the selectivity for 2-methylfuran of 91.2% and the good catalytic stability can be achieved over the Ni2P-1.00-300 catalyst under the optimal reaction conditions (1.5-MPa H2, 260 °C, 3 h), which is attributed to the synergy between Lewis acid sites and Bronsted acid sites.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Catalysis for Biomass Conversion · Catalysis and Hydrodesulfurization Studies · Nanomaterials for catalytic reactions
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (57)
Show source-provided references
1. Advani JH, Khan NH, Bajaj HC, Biradar AV (2019) Stabilization of palladium nanoparticles on chitosan derived N-doped carbon for hydrogenation of various functional groups. Appl Surf Sci 487:1307–131510.1016/j.apsusc.2019.05.057 ↗
2. Cecilia JA, Infantes-Molina A, Rodriguez-Castellon E, Jimenez-Lopez A, Oyama ST (2013) Oxygen-removal of dibenzofuran as a model compound in biomass derived bio-oil on nickel phosphide catalysts: role of phosphorus. Appl Catal B-Environ 136:140–14910.1016/j.apcatb.2013.01.047 ↗
3. Chen JX, Ci DH, Yang Q, Li KL (2014) Deactivation of Ni2P/SiO2 catalyst in hydrodechlorination of chlorobenzene. Appl Surf Sci 320:643–65210.1016/j.apsusc.2014.09.127 ↗
4. Dong F, Zhu YL, Zheng HY, Zhu YF, Li XQ, Li YW (2015) Cr-free Cu-catalysts for the selective hydrogenation of biomass-derived furfural to 2-methylfuran: the synergistic effect of metal and acid sites. J Mol Catal A Chem 398:140–14810.1016/j.molcata.2014.12.001 ↗
5. Fu ZL, Wang Z, Lin WG, Song WL, Li SG (2017) High efficient conversion of furfural to 2-methylfuran over Ni-Cu/Al2O3 catalyst with formic acid as a hydrogen donor. Appl Catal A Gen 547:248–25510.1016/j.apcata.2017.09.011 ↗
6. Gandarias I, García-Fernández S, Obregón I, Agirrezabal-Telleria I, Arias PL (2018) Production of 2-methylfuran from biomass through an integrated biorefinery approach. Fuel Process Technol 178:336–34310.1016/j.fuproc.2018.05.037 ↗
7. Gilkey MJ, Panagiotopoulou P, Mironenko AV, Jenness GR, Vlachos DG, Xu BJ (2015) Mechanistic insights into metal Lewis acid-mediated catalytic transfer hydrogenation of furfural to 2-methylfuran. ACS Catal 5:3988–399410.1021/acscatal.5b00586 ↗
8. Hou Y, Xu Z, Sun S (2007) Controlled synthesis and chemical conversions of FeO nanoparticles. Angew Chem Int Ed 46:6329–633210.1002/anie.200701694 ↗
9. Hutchings GS, Luc W, Lu Q, Zhou Y, Vlachos DG, Jiao F (2017) Nanoporous Cu-Al-Co alloys for selective furfural hydrodeoxygenation to 2-methylfuran. Ind Eng Chem Res 56:3866–387210.1021/acs.iecr.7b00316 ↗
10. Jaatinen SK, Karinen RS, Lehtonen JS (2017) Liquid phase furfural hydrotreatment to 2-methylfuran with carbon supported copper, nickel, and iron catalysts. Chemistryselect 2:51–6010.1002/slct.201601947 ↗
11. Jimenez-Gomez CP, Cecilia JA, Moreno-Tost R, Maireles-Torres P (2017) Nickel phosphide/silica catalysts for the gas-phase hydrogenation of furfural to high-added-value chemicals. ChemCatChem 9:2881–288910.1002/cctc.201700312 ↗
12. Kon K, Onodera W, Shimizu K (2014) Selective hydrogenation of levulinic acid to valeric acid and valeric biofuels by a Pt/HMFI catalyst. Catal Sci Technol 4:3227–323410.1039/C4CY00504J ↗
13. Kucharska K, Hołowacz I, Konopacka-Łyskawa D, Rybarczyk P, Kamiński M (2018) Key issues in modeling and optimization of lignocellulosic biomass fermentative conversion to gaseous biofuels. Renew Energy 129:384–40810.1016/j.renene.2018.06.018 ↗
14. Kumar VV, Naresh G, Sudhakar M, Tardio J, Bhargava SK, Venugopal A (2015) Role of Bronsted and Lewis acid sites on Ni/TiO2 catalyst for vapour phase hydrogenation of levulinic acid: kinetic and mechanistic study. Appl Catal A Gen 505:217–22310.1016/j.apcata.2015.07.031 ↗
15. Lee Y, Oyama S (2006) Bifunctional nature of a SiO2-supported Ni2P catalyst for hydrotreating: EXAFS and FTIR studies. J Catal 239:376–38910.1016/j.jcat.2005.12.029 ↗
16. Lee WS, Wang ZS, Zheng WQ, Vlachos DG, Bhan A (2014) Vapor phase hydrodeoxygenation of furfural to 2-methylfuran on molybdenum carbide catalysts. Catal Sci Technol 4:2340–235210.1039/c4cy00286e ↗
17. Li KL, Wang RJ, Chen JX (2011) Hydrodeoxygenation of anisole over silica-supported Ni2P, MoP, and NiMoP catalysts. Energy Fuel 25:854–86310.1021/ef101258j ↗
18. Li JF, Chai YM, Liu B, Wu YL, Li XH, Tang Z, Liu YQ, Liu CG (2014) The catalytic performance of Ni2P/Al2O3 catalyst in comparison with Ni/Al2O3 catalyst in dehydrogenation of cyclohexane. Appl Catal a-Gen 469:434–44110.1016/j.apcata.2013.09.047 ↗
19. Liu SL, Liu XZ, Xu LQ, Qian YT, Ma XC (2007) Controlled synthesis and characterization of nickel phosphide nanocrystal. J Cryst Growth 304:430–43410.1016/j.jcrysgro.2007.03.002 ↗
20. Liyanage DR, Danforth SJ, Liu Y, Bussell ME, Brock SL (2015) Simultaneous control of composition, size, and morphology in discrete Ni2–xCoxP nanoparticles. Chem Mater 27:4349–435710.1021/acs.chemmater.5b00958 ↗
21. Luo W, Sankar M, Beale AM, He Q, Kiely CJ, Bruijnincx PC, Weckhuysen BM (2015) High performing and stable supported nano-alloys for the catalytic hydrogenation of levulinic acid to gamma-valerolactone. Nat Commun 6:654010.1038/ncomms7540 ↗
22. Mandalika A, Runge T (2012) Enabling integrated biorefineries through high-yield conversion of fractionated pentosans into furfural. Green Chem 14:3175–318410.1039/c2gc35759c ↗
23. Mariscal R, Maireles-Torres P, Ojeda M, Sadaba I, Granados ML (2016) Furfural: a renewable and versatile platform molecule for the synthesis of chemicals and fuels. Energy Environ Sci 9:1144–118910.1039/C5EE02666K ↗
24. Moon JS, Kim EG, Lee YK (2014) Active sites of Ni2P/SiO2 catalyst for hydrodeoxygenation of guaiacol: a joint XAFS and DFT study. J Catal 311:144–15210.1016/j.jcat.2013.11.023 ↗
25. Nguyen-Huy C, Kim JS, Yoon S, Yang E, Kwak JH, Lee MS, An K (2018) Supported Pd nanoparticle catalysts with high activities and selectivities in liquid-phase furfural hydrogenation. Fuel 226:607–61710.1016/j.fuel.2018.04.029 ↗
26. Ordomsky VV, Schouten JC, van der Schaaf J, Nijhuis TA (2013) Biphasic single-reactor process for dehydration of xylose and hydrogenation of produced furfural. Appl Catal A Gen 451:6–1310.1016/j.apcata.2012.11.013 ↗
27. Oyama ST, Gott T, Zhao HY, Lee YK (2009) Transition metal phosphide hydroprocessing catalysts: a review. Catal Today 143:94–10710.1016/j.cattod.2008.09.019 ↗
28. Pan Y, Liu YQ, Liu CG (2015) An efficient method for the synthesis of nickel phosphide nanocrystals via thermal decomposition of single-source precursors. RSC Adv 5:11952–1195910.1039/C5RA00117J ↗
29. Pandiyan K, Singh A, Singh S, Saxena AK, Nain L (2019) Technological interventions for utilization of crop residues and weedy biomass for second generation bio-ethanol production. Renew Energy 132:723–74110.1016/j.renene.2018.08.049 ↗
30. Peroni M, Mancino G, Barath E, Gutierrez OY, Lercher JA (2016) Bulk and gamma-Al2O3-supported Ni2P and MoP for hydrodeoxygenation of palmitic acid. Appl Catal B Environ 180:301–31110.1016/j.apcatb.2015.06.042 ↗
31. Pham LKH, Tran TTV, Kongparakul S, Reubroycharoen P, Karnjanakom S, Guan G, Samart C (2019) Formation and activity of activated carbon supported Ni2P catalysts for atmospheric deoxygenation of waste cooking oil. Fuel Process Technol 185:117–12510.1016/j.fuproc.2018.12.009 ↗
32. Pino N, Sitthisa S, Tan QH, Souza T, Lopez D, Resasco DE (2017) Structure, activity, and selectivity of bimetallic Pd-Fe/SiO2 and Pd-Fe/gamma-Al2O3 catalysts for the conversion of furfural. J Catal 350:30–4010.1016/j.jcat.2017.03.016 ↗
33. Qi JB, Sung XY, Tang SF, Sun YY, Xu C, Li XY, Li XB (2017) Integrated study on the role of solvent, catalyst and reactant in the hydrodeoxygenation of eugenol over nickel-based catalysts. Appl Catal A Gen 535:24–3110.1016/j.apcata.2017.01.020 ↗
34. Saha B, Abu-Omar MM (2015) Current technologies, economics, and perspectives for 2,5-dimethylfuran production from biomass-derived intermediates. ChemSusChem 8:1133–114210.1002/cssc.201403329 ↗
35. Scholz D, Aellig C, Hermans I (2014) Catalytic transfer hydrogenation/hydrogenolysis for reductive upgrading of furfural and 5-(hydroxymethyl)furfural. ChemSusChem 7:268–27510.1002/cssc.201300774 ↗
36. Shu Y, Oyama ST (2005) A new type of nonsulfide hydrotreating catalyst: nickel phosphide on carbon. Chem Commun (Camb) 1143–114510.1039/b415838e ↗
37. Sitthisa S, Resasco DE (2011) Hydrodeoxygenation of furfural over supported metal catalysts: a comparative study of Cu, Pd and Ni. Catal Lett 141:784–79110.1007/s10562-011-0581-7 ↗
38. Sitthisa S, An W, Resasco DE (2011a) Selective conversion of furfural to methylfuran over silica-supported Ni-Fe bimetallic catalysts. J Catal 284:90–10110.1016/j.jcat.2011.09.005 ↗
39. Sitthisa S, Sooknoi T, Ma YG, Balbuena PB, Resasco DE (2011b) Kinetics and mechanism of hydrogenation of furfural on Cu/SiO2 catalysts. J Catal 277:1–1310.1016/j.jcat.2010.10.005 ↗
40. Song H, Dai M, Song HL, Wan X, Xu XW, Jin ZS (2014) A solution-phase synthesis of supported Ni2P catalysts with high activity for hydrodesulfurization of dibenzothiophene. J Mol Catal A Chem 385:149–15910.1016/j.molcata.2014.01.019 ↗
41. Song H, Gong J, Song HL, Li F, Zhang J, Chen YG (2016) Preparation of core-shell structured Ni2P/Al2O3@TiO2 and its hydrodeoxygenation performance for benzofuran. Catal Commun 85:1–410.1016/j.catcom.2016.07.005 ↗
42. Srivastava S, Jadeja GC, Parikh J, Versatile A (2016) Bimetallic copper-cobalt catalyst for liquid phase hydrogenation of furfural to 2-methylfuran. RSC Adv 6:1649–165810.1039/C5RA15048E ↗
43. Srivastava S, Jadeja GC, Parikh J (2017) Synergism studies on alumina-supported copper-nickel catalysts towards furfural and 5-hydroxymethylfurfural hydrogenation. J Mol Catal A Chem 426:244–25610.1016/j.molcata.2016.11.023 ↗
44. Standley EA, Smith SJ, Muller P, Jamison TF (2014) A broadly applicable strategy for entry into homogeneous nickel(0) catalysts from air-stable nickel(II) complexes. Organometal 33:2012–201810.1021/om500156q ↗
45. Stinner C, Tang Z, Haouas M, Weber T, Prins R (2002) Preparation and 31P NMR characterization of nickel phosphides on silica. J Catal 208:456–46610.1006/jcat.2002.3577 ↗
46. Tuteja J, Choudhary H, Nishimura S, Ebitani K (2014) Direct synthesis of 1,6-hexanediol from HMF over a heterogeneous Pd/ZrP catalyst using formic acid as hydrogen source. ChemSusChem 7:96–10010.1002/cssc.201300832 ↗
47. Vancov T, Alston AS, Brown T, McIntosh S (2012) Use of ionic liquids in converting lignocellulosic material to biofuels. Renew Energy 45:1–610.1016/j.renene.2012.02.033 ↗
48. Wang CM, Xu HM, Daniel R, Ghafourian A, Herreros JM, Shuai SJ, Ma X (2013) Combustion characteristics and emissions of 2-methylfuran compared to 2,5-dimethylfuran, gasoline and ethanol in a DISI engine. Fuel 103:200–21110.1016/j.fuel.2012.05.043 ↗
49. Wang YZ, Liu F, Han H, Xiao LF, Wu W (2018) Metal phosphide:a highly efficient catalyst for the selective hydrodeoxygenation of furfural to 2-methylfuran. Chemistryselect 3:7926–793310.1002/slct.201800929 ↗
50. Xiong K, Lee WS, Bhan A, Chen JGG (2014) Molybdenum carbide as a highly selective deoxygenation catalyst for converting furfural to 2-methylfuran. ChemSusChem 7:2146–214910.1002/cssc.201402033 ↗
51. Xu Z, Shen C, Hou Y, Gao H, Sun S (2009) Oleylamine as both reducing agent and stabilizerin a facile synthesis of magnetite nanoparticles. Chem Mater 21:1778–178010.1021/cm802978z ↗
52. Yang YX, Ochoa-Hernandez C, O'Shea VAD, Coronado JM, Serrano DP (2012) Ni2P/SBA-15 as a hydrodeoxygenation catalyst with enhanced selectivity for the conversion of methyl oleate into n-octadecane. ACS Catal 2:592–59810.1021/cs200659r ↗
53. Zhang DQ, Li GS, Yu JC (2009) Synthesis of size-tunable monodispersed metallic nickel nanocrystals without hot injection. Cryst Growth Des 9:2812–281510.1021/cg900063q ↗
54. Zhao Q, Han Y, Huang X, Dai JH, Tian JT, Zhu ZB, Yue L (2017a) Hydrothermal synthesis of Ni2P nanoparticle and its hydrodesulfurization of dibenzothiophene. J Nanopart Res 12310.1007/s11051-017-3781-2 ↗
55. Zhao S, Zhang ZN, Zhu KY, Chen JX (2017b) Hydroconversion of methyl laurate on bifunctional Ni2P/AlMCM-41 catalyst prepared via in situ phosphorization using triphenylphosphine. Appl Surf Sci 404:388–39710.1016/j.apsusc.2017.02.016 ↗
56. Zheng HY, Zhu YL, Teng BT, Bai ZQ, Zhang CH, Xiang HW, Li WY (2006) Towards understanding the reaction pathway in vapour phase hydrogenation of furfural to 2-methylfuran. J Mol Catal A Chem 246:18–2310.1016/j.molcata.2005.10.003 ↗
57. Zheng HY, Zhu YL, Huang L, Zeng ZY, Wan HJ, Li YW (2008) Study on Cu-Mn-Si catalysts for synthesis of cyclohexanone and 2-methylfuran through the coupling process. Catal Commun 9:342–34810.1016/j.catcom.2007.06.026 ↗