Granulometric characterization of airborne particulate release during spray application of nanoparticle-doped coatings
Source abstract
Abstract
Airborne particle release during the spray application of coatings was analyzed in the nanometre and micrometre size range. In order to represent realistic conditions of domestic and handcraft use, the spray application was performed using two types of commercial propellant spray cans and a manual gravity spray gun. Four different types of coatings doped with three kinds of metal-oxide tracer nanoparticle additives (TNPA) were analyzed. Depending on the used coating and the kind of spray unit, particulate release numbers between 5 × 10 8 and 3 × 10 10 particles per gram ejection mass were determined in the dried spray aerosols. The nanoparticulate fraction amounted values between 10 and 60 no%. The comparison between nanoparticle-doped coatings with non-doped ones showed no TNPA-attributed differences in both the macroscopic spray process characteristics and the particle release numbers. SEM, TEM and EDX-analyzes showed that the spray aerosols were composed of particles made up solely from matrix material and sheathed pigments, fillers and TNPAs. Isolated ZnO- or Fe 2 O 3 -TNPAs could not be observed.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Particle Dynamics in Fluid Flows · Aerosol Filtration and Electrostatic Precipitation · Flame retardant materials and properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (28)
Show source-provided references
1. Biskos G, Reavell K, Collings N (2005) Description and theoretical analysis of a differential mobility spectrometer. Aerosol Sci Technol 39:527–541. doi: 10.1080/02786829100483210.1080/027868291004832 ↗
2. Brosseau LM, Fang CP, Snyder C, Cohen BS (1992) Particle size distribution of automobile paint sprays. Appl Occup Environ Hyg 7:607–612. doi: 10.1080/1047322X.1992.1038805210.1080/1047322X.1992.10388052 ↗
3. Brouwer D (2010) Exposure to manufactured nanoparticles in different workplaces. Toxicology 269:120–127. doi: 10.1016/j.tox.2009.11.01710.1016/j.tox.2009.11.017 ↗
4. Carlton GN, Flynn MR (1997) Influence of spray painting parameters on breathing zone particle size distributions. Appl Occup Environ Hyg 12:744–750. doi: 10.1080/1047322X.1997.1038775810.1080/1047322X.1997.10387758 ↗
5. Dixkens J, Fissan H (1999) Development of an electrostatic precipitator for off-line particle analysis. Aerosol Sci Technol 30:438–453. doi: 10.1080/02786829930448010.1080/027868299304480 ↗
6. EN 1451-1: 1998. Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure—Polypropylene (PP)—part 1: specifications for pipes fittings and the system
7. European Commission (2011) Commission recommendation of 18 October 2011 on the definition of nanomaterial (2011/696/EU). Off J Eur Union 54(L275):38–40
8. FEA European Aerosol Federation (2013) Annual Report 2013
9. Froggett SJ, Clancy SF, Boverhof DR, Canady RA (2014) A review and perspective of existing research on the release of nanomaterials from solid nanocomposites. Part Fibre Toxicol 11:17. doi: 10.1186/1743-8977-11-1710.1186/1743-8977-11-17 ↗
10. Göhler D, Stintz M, Hillemann L, Vorbau M (2010) Characterization of nanoparticle release from surface coatings by the simulation of a sanding process. Ann Occup Hyg 54:615–624. doi: 10.1093/annhyg/meq05310.1093/annhyg/meq053 ↗
11. Göhler D, Nogowski A, Fiala P, Stintz M (2013) Nanoparticle release from nanocomposites due to mechanical treatment at two stages of the life-cycle. J Phys Conf Ser 429:01204. doi: 10.1088/1742-6596/429/1/01204510.1088/1742-6596/429/1/012045 ↗
12. Göhler D, Stintz M, Kutlescha K, Liewald H (2014) Partikelfreisetzung aus Oberflächen. Farbe und Lack 120:60–66
13. Hagendorfer H, Lorenz C, Kaegi R, Sinnet B, Gehrig R, Goetz NV, Scheringer M, Ludwig C, Ulrich A (2010) Size-fractionated characterization and quantification of nanoparticle release rates from a consumer spray product containing engineered nanoparticles. J Nanopart Res 12:2481–2494. doi: 10.1007/s11051-009-9816-610.1007/s11051-009-9816-6 ↗
14. Helsper C, Mölter W, Haller P (1990) Representative dilution of aerosols by a factor of 10,000. J Aerosol Sci 21:S637–S640. doi: 10.1016/0021-8502(90)90323-P10.1016/0021-8502(90)90323-P ↗
15. ISO 13320:2009. Particle size analysis—laser diffraction methods
16. ISO/TS 80004-1:2010. Nanotechnologies—Vocabulary—Part 1: Core terms
17. Koch W, Lödding H, Mölter W, Munzinger F (1988) Verdünnungssystem für die Messung hochkonzentrierter aerosole mit optischen Partikelzählern. Staub Reinhalt Luft 48:341–344
18. Kuhlbusch TAJ, Asbach C, Fissan H, Göhler D, Stintz M (2011) Nanoparticle exposure at nanotechnology workplaces: a review. Part Fibre Toxicol 8:22. doi: 10.1186/1743-8977-8-2210.1186/1743-8977-8-22 ↗
19. Lonati G, Ozgen S, Luraghi T, Giugliano M (2010) Particle number concentration at urban microenvironments. Chem Eng Trans 22:137–142. doi: 10.3303/CET1022022
20. Losert S, von Goetz N, Bekker C, Fransman W, Wijnhoven SWP, Delmaar C, Hungerbuhler K, Ulrich A (2014) Human exposure to conventional and nanoparticle-containing sprays—a critical review. Environ Sci Technol 48:5366–5378. doi: 10.1021/es500181910.1021/es5001819 ↗
21. Manigrasso M, Stabile L, Avino P, Buonanno G (2013) Influence of measurement frequency on the evaluation of short-term dose of sub-micrometric particles during indoor and outdoor generation events. Atmos Environ 67:130–142. doi: 10.1016/j.atmosenv.2012.10.05910.1016/j.atmosenv.2012.10.059 ↗
22. McMurry PH (2000) The history of condensation nucleus counters. Aerosol Sci Technol 33:297–322. doi: 10.1080/0278682005012151210.1080/02786820050121512 ↗
23. NRC (1983) National Research Concil Committee on the Institutional Means for Assessment of Risks to Public Health. Risk Assessment in the Federal Government: managing the process. National Academic Press, Washington ISBN: 978-0-309-03349-7
24. Patent specification DE19636221C2 (1999) Sprühdose. Peter Kwasny GmbH, Gundelsheim
25. Patent specification US5957341A (1999) Spray can. Peter Kwasny GmbH, Gundelsheim
26. Sabty-Daily RA, Hinds WC, Froines JR (2005) Size distribution of chromate paint aerosol generated in a bench-scale spray booth. Ann Occup Hyg 49:33–45
27. Vorbau M, Hillemann L, Stintz M (2009) Method for the characterization of the abrasion induced nanoparticle release into air from surface coatings. J Aerosol Sci 40:209–217. doi: 10.1016/j.jaerosci.2008.10.00610.1016/j.jaerosci.2008.10.006 ↗
28. Wilson JC, Liu BY (1980) Aerodynamic particle size measurement by laser-doppler velocimetry. J Aerosol Sci 11:139–150. doi: 10.1016/0021-8502(80)90030-010.1016/0021-8502(80)90030-0 ↗