Vapor phase synthesis and characterization of bimetallic alloy and supported nanoparticle catalysts
Source abstract
Abstract
The laser vaporization controlled condensation (LVCC) technique coupled with a differential mobility analyzer (DMA) is used to synthesize size-selected alloy nanoparticles and nanoparticle catalyst systems. The formation of Au–Ag alloy nanoparticles is concluded from the observation of only one plasmon band. The maximum of the plasmon absorption is found to vary linearly with the gold mole fraction. For the Au–Pd system, the XRD data confirms the formation of the alloy nanoparticles with no evidence of any of the pure components. The Au/CeO2 nanoparticle catalyst prepared by the LVCC method is a promising catalyst for low temperature CO oxidation due to its high activity and stability.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Catalytic Processes in Materials Science · nanoparticles nucleation surface interactions · Laser-Ablation Synthesis of Nanoparticles
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (41)
Show source-provided references
1. Abdelsayed V. (2004) “Experimental Studies on Nucleation, Nanoparticles′ Formation and Polymerization from the Vapor Phase”. Virginia Commonwealth University, Richmond, VA 23284, Ph.D. Dissertation
2. Bond G.C. (2001). Gold: A relatively new catalyst. Gold Bulletin 34: 117–11910.1007/BF03214823 ↗
3. Chen D.-H. and Chen C.J. (2002).Formation of characterization of Au-Ag bimetallic nanoparticles in water-in-oil microemulsions. J. Materials Chemistry 12: 1557–156210.1039/b110749f ↗
4. Costello C.K.,Yang J.H., Law H.Y.,Wang Y., Lin J.N., Marks L.D., Kung M.C. and Kung H.H. (2003). On the potential role of hydroxyl groups in CO oxidation over Au/Al2 O 3. Appl. Catal. A 243: 15–2410.1016/S0926-860X(02)00533-1 ↗
5. Date M. and Haruta M. (2001). Moisture effect on CO oxidation over Au/TiO2 catalyst J. Catal. 201: 221–22410.1006/jcat.2001.3254 ↗
6. Edelstein A.S. and Cammarata R.C. (eds) (1996). “Nanomaterials: Synthesis, Properties and Applications”. Institute of Physics: Bristol, Philadelphia
7. El-Shall M.S., Abdelsayed V., Pithawalla Y.B., Alsharaeh E. and Deevi S.C.(2003). Vapor phase growth and assembly of metallic, intermetallic, carbon, and silicon nanoparticles filaments. J. Phys. Chem. B 107: 2882–288610.1021/jp022176o ↗
8. El-Shall M. S., Li S., Graiver D. and Pernisz U. (1996).“Synthesis of nanostructured materials using a laser vaporization-condensation technique”. In: Chow G. and Gonsalves K.E. (eds) "Nanotechnology: Molecularly Designed Nanostructural Materials". ACS Symposium Series, Washington, D.C.
9. El-Shall M.S., Slack W., Vann W., Kane D. and Hanley D. (1994). Synthesis of nanoscale metal oxide particles using laser vaporization/condensation in a diffusion cloud chamber J. Phys. Chem. 98: 3067–7010.1021/j100063a001 ↗
10. Fernandez-Garcia M., Martinez-Arias A., Salamanca L.N., Coronado J.M., Anderson J.A.,Conesa J.C. and Soria J. (1999). Influences of ceria on Pd activity for the CO +O 2 reaction. J. Catal. 187: 474–48510.1006/jcat.1999.2624 ↗
11. Ferrandon M., Ferrand B., Bjoernbom E., Klingstedt F., Neyestanaki A.K., Karhu H. and Vaeyrynen I.J.(2001). Copper oxide -platinum/ alumina catalysts for volatile organic compound and carbon monoxide oxidation: Synergetic effect of cerium and lanthanum. J. Catal. 202: 354–36610.1006/jcat.2001.3303 ↗
12. Fu Q., Weber A. and Flytzani-Stephanopoulos M. (2001). Nanostructured of Au-CeO2 catalysts for low-temperature water-gas shift Catal. Lett. 77: 87–9510.1023/A:1012666128812 ↗
13. German R.M. (1996) Powder Metallurgy Science, Metal Powder Industries Federation, 2nd edition, pp 49–56.
14. Hadjipanayis G.C. and Siegel R.W.(eds) (1994) “Nanophase Materials Synthesis-Properties-Applications”,, NATO ASI Ser. 260, Kluwer Academic Publications, London
15. Han S.W., Kim Y. and Kim K. (1998). Dodecanethiol-derivatized Au/Ag bimetallic nanoparticles: TEM, UV/VIS, XPS, and FTIR analysis J. Colloid Interface Sci. 208: 272–27810.1006/jcis.1998.5812 ↗
16. Haruta M. & Sano H. (1983) in `Preparation of Catalysts III', G. Poncelet, P. Grange & P.A. Jacobs (eds.) Elsevier, Amsterdam, p. 225.
17. Haruta M. and Date M. (2001). Advances in the catalysis of Au nanoparticles Appl. Catal. A 222: 427–43710.1016/S0926-860X(01)00847-X ↗
18. Haruta M., Sano H. & Kobayashi T. (1987) `Method for manufacture of catalyst composite having gold or mixture of gold with catalytic metal oxide deposited on a support' US Patent # 4698324.
19. Haruta M., Yamada N., Kobayashi T. and Iijima S. (1989). Gold catalysts prepared by coprecipitation for low-temperature oxidation of hydrogen and of carbon monoxide J. Catal. 115: 301–910.1016/0021-9517(89)90034-1 ↗
20. Huang C.-Y., Chiang H-J., Huang J-C. and Sheen S.R. (1999). Synthesis of nanocrystalline Ag-Pd alloys by chemical reduction method Nanostruct. Mat. 10: 1393–140010.1016/S0965-9773(99)00018-5 ↗
21. Huber H., McIntosh D. and Ozin G.A.(1977). A metal atom model for the oxidation of carbon monoxide to carbon dioxide. The gold atom-carbon monoxide-dioxygen reaction and the gold atom-carbon dioxide reaction Inorganic Chemistry 16: 975–910.1021/ic50171a001 ↗
22. Kelly K.L., Coronado E., Zhao L.L. and Schatz G.C.(2003). The optical properties of metal nanoparticles: The influence of size, shape, and dielectric environment J. Phys. Chem. B 107: 668–67710.1021/jp026731y ↗
23. Kim M.-J., Na H.-J., Lee K.C., Yoo E.A. and Lee M. (2003). Preparation and characterization of Au-Ag and Au-Cu alloy nanoparticles in chloroform J. Materials Chemistry 13: 1789–179210.1039/B304006M ↗
24. Kittel C. & P. McEuen (2004) `Introduction to Solid State Physics'. 8th edn. John Wiley & Sons Inc, New. York
25. Li S. and El-Shall M.S.(1999). Synthesis and charcterization of photochromic molybdenum and tungsten oxide nanoparticles Nanostruct. Mat. 12: 215–21910.1016/S0965-9773(99)00102-6 ↗
26. Li S., Silvers S.J. and El-Shall M.S.(1997). Surface oxidation and luminescence properties of weblike agglomeration of silicon nanocrystals produced by a laser vaporization-controlled condensation technique J. Phys. Chem. B 101: 1794–180210.1021/jp963192m ↗
27. Link S., Burda C.,Nikoobakht B., El-Sayed M.A.(1999). How long does it take to melt a gold nanorod? A femtosecond pump-probe absorption spectroscopic study. Chem. Phys. Letters 315: 12–1810.1016/S0009-2614(99)01214-2 ↗
28. Liu T., Leng Y. and Li X. (2003). Preparation and characteristics of Fe3Al nanoparticles by hydrogen plasma-metal reaction Solid State Commun 125: 391–39410.1016/S0038-1098(02)00831-1 ↗
29. Liz-Marzan L.M. and Kamat P.V.(eds) (2003) “Nanoscale Materials”. Kluwer Academic Publishers, Boston, Dordrecht, London
30. Luengnaruemitchai A., Osuwan S. and Gulari E. (2003). Comparative studies of low-temperature water-gas shift reaction over Pt/CeO2, Au/CeO 2 and Au/Fe2O3 catalysts Catal. Commun. 4: 215–22110.1016/S1566-7367(03)00036-0 ↗
31. Mohr C., Hofmeister H., Lucas M. and Claus P. (2000). Gold catalysts for the partial hydrogenation of acrolein Chem. Eng. Technol. 23: 324–32810.1002/(SICI)1521-4125(200004)23:4<324::AID-CEAT324>3.0.CO;2-K ↗
32. Moser W.R. (ed.) (1996) `Advanced catalysts and nanostructured materials: modern synthetic methods', Academic press.
33. Pithawalla Y.B., El-Shall M.S., Deevi S.C., Stroem V. and Rao K.V. (2001).Synthesis of magnetic intermetallic FeAl nanoparticles from a non-magnetic bulk alloy. J. Phys. Chem. B 105: 2085–209010.1021/jp002354i ↗
34. Sanchez R.M.T., Ueda A., Tanaka K. and Haruta M. (1997). Selective oxidation of CO in hydrogen over gold supported on manganese oxides. J Catal 168: 125–12710.1006/jcat.1997.1636 ↗
35. Sun Y. and Xia Y. (2002). Shape-controlled synthesis of gold and silver nanoparticles Science 298: 2176–217910.1126/science.1077229 ↗
36. Sun Y. and Xia Y. (2003). Gold and silver nanoparticles: A class of chromophores with colors tunable in the range from 400 to 750 nm Analyst 128: 686–69110.1039/b212437h ↗
37. Trovarelli A., de Leitenburg C., Boaro M. and Dolcetti G. (1999). The utilization of ceria in industrial catalysis. Catal Today 50: 353–36710.1016/S0920-5861(98)00515-X ↗
38. Tschope A., Liu W., Flytzani-Stephanopoulos M. and Ying J.Y.(1995). Redox activity of nonstoichiometric cerium oxide-based nanocrystalline catalysts J. Catal. 157: 42–5010.1006/jcat.1995.1266 ↗
39. Varon J., Marik P.E., Fromm R.E., Gueler A. (1999). Carbon monoxide poisoning: A review for clinicians J. Emergency Med17: 87–9310.1016/S0736-4679(98)00128-0 ↗
40. Wolf A. and Schuth F. (2002). A systematic study of the synthesis conditions for the preparation of highly active gold catalysts Appl. Catal. A 226: 1–1310.1016/S0926-860X(01)00772-4 ↗
41. Yamada Y., Ueda A., Zhao Z., Maekawa T., Suzuki K., Takada T. and Kobayashi T. (2001).Rapid evaluation of oxidation catalysis by gas sensor system: total oxidation, oxidative dehyrogenation, and selective oxidation over metal oxide catalysts. Catal Today 67: 379–38710.1016/S0920-5861(01)00330-3 ↗