Respiratory protection against airborne nanoparticles: a review
Source abstract
Abstract
As a precautionary measure, it is often recommended that workers take steps to reduce their exposure to airborne nanoparticles through the use of respiratory protective devices. The purpose of this study was to provide a review and analysis of the research literature and current recommendations on respirators used for protection against nanoparticles. Key research findings were that studies with particles as small as 4 nm have shown that conventional single-fiber filtration theory can be used to describe the filtration performance of respirators and that the most penetrating particle size for respirators equipped with commonly used electrostatic filter media is in the range of 30-100 nm. Future research needs include human laboratory and workplace protection factor studies to measure the respirator total inward leakage of nanoparticles. Industrial hygienists and safety professionals should continue to use traditional respirator selection guidance for workers exposed to nanoparticles.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Air Quality and Health Impacts · Noise Effects and Management · Infection Control and Ventilation
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (45)
Show source-provided references
1. ASTM Standard E 2535-07 (2007) Standard guide for handling unbound engineered nanoscale particles in occupational settings. In: ASTM International, West Conshohocken, PA. http://www.astm.org
2. Balazy A, Toivola M, Reponen T, Podgorski A, Zimmer A, Grinshpun SA (2006) Manikin-based performance evaluation of N95 filtering-facepiece respirators challenged with nanoparticles. Ann Occup Hyg 50:259–269. doi: 10.1093/annhyg/mei058
3. Barrett LW, Rousseau AD (1998) Aerosol loading performance of electret filter media. Am Ind Hyg Assoc J 59:532–539. doi: 10.1080/1542811989101070310.1080/15428119891010703 ↗
4. BSI (2008) Nanotechnologies—Part 2: guide to safe handling and disposal of manufactured nanomaterials PD 6699-2:2007. http://www.bsi-global.com/en/Standards-and-Publications/Industry-Sectors/Nanotechnologies/PD-6699-2/Download-PD6699-2-2007/
5. Chen CC, Ruuskanen J, Pilacinski W, Willeke K (1992) Characteristics of face seal leakage in filtering facepieces. Am Ind Hyg Assoc 53:533–53910.1080/15298669291360120 ↗
6. Coffey CC, Campbell DL, Myers WR, Zhuang Z (1998) Comparison of six respirator fit-test methods with an actual measurement of exposure in a simulated health care environment: Part II—Method comparison testing. Am Ind Hyg Assoc 59:862–87010.1080/15428119891011036 ↗
7. DOE (2008) Approach to nanomaterial ES&H revision 3a May 2008. http://orise.orau.gov/ihos/nanotechnology/files/NSRCMay12.pdf
8. Eninger RM, Honda T, Reponen T, McKay R, Grinshpun SA (2008a) What does respirator certification tell us about filtration of ultrafine particles? J Occup Environ Hyg 5:286–295. doi: 10.1080/1545962080196015310.1080/15459620801960153 ↗
9. Eninger RM, Honda T, Adhikari A, Heinonen-Tanski H, Reponen T, Grinshpun SA (2008b) Filter performance of N99 and N95 facepiece respirators against viruses and ultrafine particles. Ann Occup Hyg 52:385–396. doi: 10.1093/annhyg/men01910.1093/annhyg/men019 ↗
10. EPA (2008) Significant new use rules on certain chemical substances. Fed Regist 73(215), Wednesday, November 5, 2008, Rules and Regulations, pp 65743–65766. http://edocket.access.gpo.gov/2008/pdf/E8-26409.pdf
11. Eshbaugh JP, Gardner PD, Richardson AW (2009) N95 and P100 respirator filter efficiency under high constant and cyclic flow. J Occup Environ Hyg 6:52–61. doi: 10.1080/1545962080255819610.1080/15459620802558196 ↗
12. FIOSH (2007) Guidance for handling and use of nanomaterials at the workplace. http://www.baua.de/nn_49456/en/Topics-from-A-to-Z/Hazardous-Substances/Nanotechnology/pdf/guidance.pdf
13. Gardner PD, Hofacre KC, Richardson AW (2004) Comparison of simulated respirator fit factors using aerosol and vapor challenges. J Occup Environ Hyg 1:29–38. doi: 10.1080/1545962049026445410.1080/15459620490264454 ↗
14. Golanski L, Guiot A, Tardif F (2008) Are conventional protective devices such as fibrous filter media, respirator cartridges, protective clothing and gloves also efficient for nanoparticles? In: European Strategy for Nanosafety, pp 1–8
15. Haruta H, Honda T, Eninger RM, Reponen T, McKay R, Grinsphun SA (2008) Experimental and theoretical investigation of the performance of N95 respirator filters against ultrafine aerosol particles tested at constant and cyclic flow rates. J Int Soc Res Prot 25:75–88
16. Heim M, Millins BJ, Wild M, Meyer J (2005) Filtration efficiency of aerosol particles below 20 nanometers. Aerosol Sci Technol 39:782–789. doi: 10.1080/0278682050022737310.1080/02786820500227373 ↗
17. Hinds WC (1999) Properties, behavior, and measurement of airborne particles, 2nd edn. Wiley-Interscience Publication, John Wiley & Sons, Inc, New York
18. Hinds WC, Kraske G (1987) Performance of dust respirators with facial seal leaks: I. Experimental. Am Ind Hyg Assoc 48:836–84110.1080/15298668791385679 ↗
19. Holton PM, Tackett DL, Willeke K (1987) Particle size-dependent leakage and losses of aerosols in respirators. Am Ind Hyg Assoc 48:848–85410.1080/15298668791385697 ↗
20. Huang SH, Chen CW, Chang CP, Lai CY, Chen CC (2007) Penetration of 4.5 nm to 10 μm aerosol particles through fibrous filters. J Aerosol Sci 38(7):719–727. doi: 10.1016/j.jaerosci.2007.05.00710.1016/j.jaerosci.2007.05.007 ↗
21. IRSST (2007) Health effects of nanoparticles. http://www.irsst.qc.ca/files/documents/PubIRSST/R-469.pdf
22. ISO (2008) Nanotechnologies—Health and safety practices in occupational settings relevant to nanotechnologies. ISO/Technical Review 12885
23. Janssen LL, Bidwell J (2007) Performance of a full facepiece, air-purifying respirator against lead aerosols in a workplace environment. J Occup Environ Hyg 4:123–128. doi: 10.1080/1545962060112884510.1080/15459620601128845 ↗
24. Janssen LL, Weber R (2005) The effect of pressure drop on respirator face seal leakage. J Occup Environ Hyg 2:335–340. doi: 10.1080/1545962059096506810.1080/15459620590965068 ↗
25. Janssen LL, Nelson TJ, Cuta KT (2007) Workplace protection factors for an N95 filtering facepiece respirator. J Occup Environ Hyg 4:698–707. doi: 10.1080/1545962070151776410.1080/15459620701517764 ↗
26. Kim CS, Bao L, Okuyama K, Shimada S, Niinuma H (2006) Filtration efficiency of a fibrous filter for nanoparticles. J Nanopart Res 8:215–221. doi: 10.1007/s11051-005-9017-x10.1007/s11051-005-9017-x ↗
27. Kim SE, Harrington MS, Pui DYH (2007) Experimental study of nanoparticles penetration through commercial filter media. J Nanopart Res 9:117–125. doi: 10.1007/s11051-006-9176-410.1007/s11051-006-9176-4 ↗
28. Krishnan U, Willeke K, Juozaitis A, Myojo T, Talaska G, Shukla R (1994) Variation in quantitative respirator fit factors due to fluctuations in leak size during fit testing. Am Ind Hyg Assoc 55:309–31410.1080/15428119491018943 ↗
29. Lee S-A, Grinshpun SA, Reponen T (2008) Respiratory performance offered by N95 respirators and surgical masks: Human subject evaluation with NaCl aerosol representing bacterial and viral particle size range. Ann Occup Hyg 52:177–185. doi: 10.1093/annhyg/men00510.1093/annhyg/men005 ↗
30. Martin SB Jr, Moyer ES (2000) Electrostatic respirator filter media: filter efficiency and most penetrating particle size effects. Appl Occup Environ Hyg 15:609–617. doi: 10.1080/1047322005007561710.1080/10473220050075617 ↗
31. MIT Environment, Health, and, Safety, Office (2008) Best Practices for handling nanomaterials in laboratories. http://web.mit.edu/environment/pdf/University_Best_Practices.pdf
32. Myers WR, Kim H, Kadrichu N (1991) Effect of particle size on assessment of faceseal leakage. J Int Soc Respir Prot 9:6–21
33. NIOSH (1995) Respiratory protective devices; final rule and notices. Fed Regist 60(110):30335–30404. http://frwebgate.access.gpo.gov/cgi-bin/getpage.cgi?dbname=1995_register&position=all&page=30335
34. NIOSH (2004) NIOSH respirator selection logic. DHHS (NIOSH) Publication No. 2005-100. Cincinnati, OH. http://www.cdc.gov/niosh/docs/2005-100/
35. NIOSH (2005a) Procedure No. RCT-APR-STP-0057, 0058, 0059, Revision 1.1. In: DHHS, Centers for Disease Control and Prevention, National Institute for Occupational Safety and Health, National Personal Protective Technology Laboratory, Pittsburgh. http://www.cdc.gov/niosh/npptl/stps/pdfs/RCT-APR-0057%2058%2059.pdf
36. NIOSH (2005b) Procedure No. RCT-APR-STP-0051, 0052, 0053, 0054, 0055, 0056, Revision 1.1. In: DHHS, Centers for Disease Control and Prevention, National Institute for Occupational Safety and Health, National Personal Protective Technology Laboratory, Pittsburgh. http://www.cdc.gov/niosh/npptl/stps/pdfs/RCT-APR-0051%2052%2053%2054%2055%2056.pdf
37. NIOSH (2005c) NIOSH CURRENT INTELLIGENCE BULLETIN: evaluation of health hazard and recommendations for occupational exposure to titanium dioxide. http://www.cdc.gov/niosh/review/public/tio2/pdfs/tio2draft.pdf
38. NIOSH (2006) Approaches to safe nanotechnology. An information exchange with NIOSH. http://www.cdc.gov/niosh/topics/nanotech/safenano/
39. OSHA (1998) Respiratory protection—OSHA. Fed Regist 63:1152–1300. http://www.osha.gov/pls/oshaweb/owadisp.show_document?p_table=FEDERAL_REGISTER&p_id=13749
40. OSHA (2006) Assigned protection factors: Final rule. Fed Regist 71:50121–50192. http://www.osha.gov/pls/oshaweb/owadisp.show_document?p_table=FEDERAL_REGISTER&p_id=18846
41. Rengasamy A, Verbofsky R, King WP, Shaffer RE (2007) Nanoparticle penetration through NIOSH-approved N95 filtering-facepiece respirators. J Int Soc Res Prot 24:49–59
42. Rengasamy S, Eimer B, Shaffer RE (2008a) Nanoparticle filtration performance of commercially available dust masks. J Int Soc Respir Prot 25:27–41
43. Rengasamy S, King WP, Eimer B, Shaffer RE (2008b) Filtration performance of NIOSH-approved N95 and P100 filtering-facepiece respirators against 4–30 nanometer size nanoparticles. J Occup Environ Hyg 5:556–564. doi: 10.1080/1545962080227538710.1080/15459620802275387 ↗
44. Rengasamy S, Eimer B, Shaffer RE (2009) Comparison of nanoparticle filtration performance of NIOSH-approved and CE marked filtering-facepiece respirators. Ann Occup Hyg 53:117–128. doi: 10.1093/annhyg/men08610.1093/annhyg/men086 ↗
45. Schulte PA, Geraci C, Zumwalde R, Hoover M, Kuempel E (2008) Occupational risk management of engineered nanoparticles. J Occup Environ Hyg 5:239–249. doi: 10.1080/1545962080190784010.1080/15459620801907840 ↗