A new design and optimization of SnSe-based dual absorber solar cell with efficiency above 28%
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Perovskite Materials and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (56)
Show source-provided references
1. Abbas S, Bajgai S, Chowdhury S et al (2022) Numerical simulation of the performance of Sb2Se3 solar cell via optimizing the optoelectronic properties based SCAPS-1D. Materials 15:627210.3390/ma15186272 ↗
2. Ahmad F, Lakhtakia A, Monk PB (2020) Double-absorber thin-film solar cell with 34% efficiency. Appl Phys Lett 117:033901. https://doi.org/10.1063/5.001791610.1063/5.0017916 ↗
3. Al Ahmed SR, Sunny A, Rahman S (2021) Performance enhancement of Sb2Se3 solar cell using a back surface field layer: a numerical simulation approach. Solar Energy Mater Solar Cells 221:110919. https://doi.org/10.1016/j.solmat.2020.11091910.1016/j.solmat.2020.110919 ↗
4. Al Mahmud J, Rahman MF, Kuddus A et al (2023) Design and analysis of SnS 2/WS 2/V2O5 double-heterojunction toward high performance photovoltaics. Energy Adv 2:9–21. https://doi.org/10.1039/d3ya00231d10.1039/d3ya00231d ↗
5. AlZoubi T, Moghrabi A, Moustafa M, Yasin S (2021) Efficiency boost of CZTS solar cells based on double-absorber architecture: device modeling and analysis. Sol Energy 225:44–5210.1016/j.solener.2021.07.012 ↗
6. Aspan RM, Fatima N, Mohamed R et al (2021) An overview of the strategies for tin selenide advancement in thermoelectric application. Micromachines 12:1463. https://doi.org/10.3390/mi1212146310.3390/mi12121463 ↗
7. Astakhov O, Smirnov V, Carius R et al (2014) Relationship between absorber layer defect density and performance of a-Si: H and µc-Si: H solar cells studied over a wide range of defect densities generated by 2 MeV electron bombardment. Sol Energy Mater Sol Cells 129:17–3110.1016/j.solmat.2013.12.024 ↗
8. Atowar Rahman M (2021) Enhancing the photovoltaic performance of Cd-free Cu2ZnSnS4 heterojunction solar cells using SnS HTL and TiO2 ETL. Sol Energy 215:64–76. https://doi.org/10.1016/j.solener.2020.12.02010.1016/j.solener.2020.12.020 ↗
9. Baig F, Khattak YH, Beg S, Soucase BM (2019) Numerical analysis of a novel CNT/Cu2O/Sb2Se3/In2S3/ITO antimony selenide solar cell. Optik 197:163107. https://doi.org/10.1016/j.ijleo.2019.16310710.1016/j.ijleo.2019.163107 ↗
10. Beltrán-Bobadilla P, Carrillo-Osuna A, Rodriguez-Valverde JA et al (2021) SnSe solar cells: Current results and perspectives. Gen Chem 7:20001210.21127/yaoyigc20200012 ↗
11. Benzetta AEH, Abderrezek M, Djeghlal ME (2020) A comparative study on generation and recombination process of kesterite CZTS based thin film solar cells for different designs. Optik 219:165300. https://doi.org/10.1016/j.ijleo.2020.16530010.1016/j.ijleo.2020.165300 ↗
12. Bhowmik A, Abir AT, Pappu MAH et al (2024) Modeling and efficiency enhancement of SnSe thin film solar cell with a thin CIS layer. Results Mater 21:100521. https://doi.org/10.1016/j.rinma.2023.10052110.1016/j.rinma.2023.100521 ↗
13. Cang Q, Guo H, Jia X et al (2020) Enhancement in the efficiency of Sb2Se3 solar cells by adding low lattice mismatch CuSbSe2 hole transport layer. Sol Energy 199:19–25. https://doi.org/10.1016/j.solener.2020.02.00810.1016/j.solener.2020.02.008 ↗
14. Cánovas E, Fuertes Marrón D, Martí A et al (2010) Photoreflectance analysis of a GaInP/GaInAs/Ge multijunction solar cell. Appl Phys Lett 97:8–11. https://doi.org/10.1063/1.351725510.1063/1.3517255 ↗
15. Cao Y, Liu C, Jiang J et al (2021) Carrier collection in thin-film CdTe solar cells. Solar RRL 5:200080010.1002/solr.202000800 ↗
16. Cao Y, Zhu X, Chen H et al (2019) Towards high efficiency inverted Sb2Se3 thin film solar cells. Sol Energy Mater Sol Cells 200:109945. https://doi.org/10.1016/j.solmat.2019.10994510.1016/j.solmat.2019.109945 ↗
17. Delahoy AE, Cheng Z, Chin KK (2012) Carrier collection in thin-film CdTe solar cells: theory and experiment. In: Proc 27th EU PVSEC. pp 2837–2842. https://doi.org/10.4229/27thEUPVSEC2012-3DV.3.5010.4229/27thEUPVSEC2012-3DV.3.50 ↗
18. Deng H, Chen S, Ishaq M et al (2022) Efficient all-inorganic Sb 2 S 3 solar cells with matched energy levels using Sb 2 Se 3 as hole transport layers. Solar RRL 6:2101017. https://doi.org/10.1002/solr.20210101710.1002/solr.202101017 ↗
19. El Otmani R, El Manouni A, Al Maggoussi A (2021) Numerical simulation of CZTSe based solar cells using different back surface field layers: improvement and comparison. J Electron Mater 50:2021–2033. https://doi.org/10.1007/s11664-020-08712-810.1007/s11664-020-08712-8 ↗
20. Kumar N (2023) New Sb2Se3-based solar cell for achieving high efficiency theoretical modeling. In: Optical and quantum electronics, vol 55. p 514. https://doi.org/10.1007/s11082-023-04797710.1007/s11082-023-047977 ↗
21. Haque MD, Ali MH, Islam AZMT (2021) Efficiency enhancement of WSe2 heterojunction solar cell with CuSCN as a hole transport layer: a numerical simulation approach. Sol Energy 230:528–537. https://doi.org/10.1016/j.solener.2021.10.05410.1016/j.solener.2021.10.054 ↗
22. Hasan Ali M, Saiful Islam ATM, Haque MD et al (2023) Numerical analysis of FeSi2 based solar cell with PEDOT:PSS hole transport layer. Mater Today Commun 34:105387. https://doi.org/10.1016/j.mtcomm.2023.10538710.1016/j.mtcomm.2023.105387 ↗
23. He B, Liu L, Hu J et al (2023) The properties of perovskite solar cells with novel MAPbBr 3/CsPbBr3 double absorber. J Phys D Appl Phys 56:15107. https://doi.org/10.1088/1361-6463/ac9ce510.1088/1361-6463/ac9ce5 ↗
24. Karade VC, Jang JS, Kumbhar D et al (2022) Combating open circuit voltage loss in Sb2Se3 solar cell with an application of SnS as a back surface field layer. Sol Energy 233:435–445. https://doi.org/10.1016/j.solener.2022.01.01010.1016/j.solener.2022.01.010 ↗
25. Khatoon S, Chakraborty V, Yadav SK et al (2023) Simulation study of CsPbIxBr 1–x and MAPbI3 heterojunction solar cell using SCAPS-1D. Sol Energy 254:137–15710.1016/j.solener.2023.02.059 ↗
26. Khatun MM, Sunny A, Al ASR (2021) Numerical investigation on performance improvement of WS2 thin-film solar cell with copper iodide as hole transport layer. Sol Energy 224:956–965. https://doi.org/10.1016/j.solener.2021.06.06210.1016/j.solener.2021.06.062 ↗
27. Kosyachenko LA, Mykytyuk TI, Fodchuk IM et al (2014) Electrical characteristics of thin-film CdS/CdMgTe heterostructure for tandem solar cells. Sol Energy 109:144–152. https://doi.org/10.1016/j.solener.2014.08.02910.1016/j.solener.2014.08.029 ↗
28. Kumar A, Sujith M, Valarmathi K et al (2023) Double-absorber CZTS/Sb 2 Se 3 architecture for high-efficiency solar-cell devices. Physica Status Solidi (a) 220:2200902. https://doi.org/10.1002/pssa.20220090210.1002/pssa.202200902 ↗
29. Kumar M, Rani S, Singh Y et al (2021) Tin-selenide as a futuristic material: properties and applications. RSC Adv 11:6477–6503. https://doi.org/10.1039/d0ra09807h10.1039/d0ra09807h ↗
30. Kumar M, Rani S, Vashishtha P et al (2022) Exploring the optoelectronic properties of SnSe: a new insight. J Mater Chem C 10:16714–16722. https://doi.org/10.1039/d2tc03799h10.1039/d2tc03799h ↗
31. Kumari R, Mamta KR, Singh VN (2022) SnTe as a BSF enhances the performance of Sb2Se3 based solar cell: A numerical approach. Heliyon 8:e12043. https://doi.org/10.1016/j.heliyon.2022.e1204310.1016/j.heliyon.2022.e12043 ↗
32. Li Z-Q, Ni M, Feng X-D (2020) Simulation of the Sb2Se3 solar cell with a hole transport layer. Mater Res Express 7:16416. https://doi.org/10.1088/2053-1591/ab5fa710.1088/2053-1591/ab5fa7 ↗
33. Liyanage GK, Phillips AB, Heben MJ (2018) Role of band alignment at the transparent front contact/emitter interface in the performance of wide bandgap thin film solar cells. APL Mater 6:101104. https://doi.org/10.1063/1.505153710.1063/1.5051537 ↗
34. Maklavani SE, Mohammadnejad S (2020) Reduction of interface recombination current for higher performance of p+-CZTSxSe (1–x)/p-CZTS/n-CdS thin-film solar cells using Kesterite intermediate layers. Sol Energy 204:489–50010.1016/j.solener.2020.04.096 ↗
35. Makori NE, Amatalo IA, Karimi PM, Njoroge WK (2015) Characterization of SnSe-CdO: Sn PN junction for solar cell applications. Int J Energy Eng 5:1–4. https://doi.org/10.5923/j.ijee.20150501.0110.5923/j.ijee.20150501.01 ↗
36. Mamta, Maurya KK, Singh VN (2022) Sb2Se3/CZTS dual absorber layer based solar cell with 36.32 % efficiency: a numerical simulation. J Sci: Adv Mater Devices 7:100445. https://doi.org/10.1016/j.jsamd.2022.10044510.1016/j.jsamd.2022.100445 ↗
37. Mandal P, Ghorui UK, Mondal A, Banerjee D (2022) Photoelectrochemical performance of tin selenide (SnSe) thin films prepared by two different techniques. Electron Mater Lett 18:381–390. https://doi.org/10.1007/s13391-022-00349-510.1007/s13391-022-00349-5 ↗
38. Mao Y, Xu C, Yuan J, Zhao H (2019) A two-dimensional GeSe/SnSe heterostructure for high performance thin-film solar cells. J Mater Chem A 7:11265–1127110.1039/C9TA01219B ↗
39. Mavlonov A, Razykov T, Raziq F et al (2020) A review of Sb2Se3 photovoltaic absorber materials and thin-film solar cells. Sol Energy 201:227–246. https://doi.org/10.1016/j.solener.2020.03.00910.1016/j.solener.2020.03.009 ↗
40. Moon MMA, Ali MH, Rahman MF et al (2020) Design and simulation of FeSi2-based novel heterojunction solar cells for harnessing visible and near-infrared light. Physica Status Solidi (A) App Mater Sci 217:1900921. https://doi.org/10.1002/pssa.20190092110.1002/pssa.201900921 ↗
41. Nassiri Nazif K, Kumar A, Moreira de Menezes MT, Saraswat K (2019) Towards high Voc, thin film, homojunction WS2 solar cells for energy harvesting applications. In: Matin M, Dutta AK, Lange AP (eds) Wide bandgap materials, devices, and applications IV. SPIE, p 710.1117/12.2533007 ↗
42. Naureen S, Lohia P et al (2022) A comparative study of quantum dot solar cell with two different ETLs of WS2 and IGZO using SCAPS-1D simulator. Solar 2:341–35310.3390/solar2030020 ↗
43. Ngoupo AT, Ouédraogo S, Zougmoré F, Ndjaka JMB (2021) Numerical analysis of ultrathin Sb2Se3-based solar cells by SCAPS-1D numerical simulator device. Chin J Phys 70:1–13. https://doi.org/10.1016/j.cjph.2020.12.01010.1016/j.cjph.2020.12.010 ↗
44. Philipps SP, Peharz G, Hoheisel R et al (2010) Energy harvesting efficiency of III-V triple-junction concentrator solar cells under realistic spectral conditions. Sol Energy Mater Sol Cells 94:869–877. https://doi.org/10.1016/j.solmat.2010.01.01010.1016/j.solmat.2010.01.010 ↗
45. Rahman MA (2021) Design and simulation of a high-performance Cd-free Cu2SnSe3 solar cells with SnS electron-blocking hole transport layer and TiO2 electron transport layer by SCAPS-1D. SN Applied Sciences 3:1–15. https://doi.org/10.1007/s42452-021-04267-310.1007/s42452-021-04267-3 ↗
46. Rahman MF, Habib MJA, Ali MH et al (2022) Design and numerical investigation of cadmium telluride (CdTe) and iron silicide (FeSi 2) based double absorber solar cells to enhance power conversion efficiency. AIP Adv 12:105317. https://doi.org/10.1063/5.010845910.1063/5.0108459 ↗
47. Shi W, Gao M, Wei J et al (2018) Tin selenide (SnSe): Growth, properties, and applications. Adv Sci 5:1700602. https://doi.org/10.1002/advs.20170060210.1002/advs.201700602 ↗
48. Singh JP, Bedi RK (1990) FTO/SnSe heterojunction for photovoltaic conversion. Jpn J Appl Phys 29:L79210.1143/JJAP.29.L792 ↗
49. Sultana B, Islam ATMS, Haque MD et al (2023) Numerical study of MoSe2-based dual-heterojunction with In2Te3 BSF layer toward high-efficiency photovoltaics. Physica Scripta 98:095935. https://doi.org/10.1088/1402-4896/acee2910.1088/1402-4896/acee29 ↗
50. Tao J, Hu X, Xue J et al (2019) Investigation of electronic transport mechanisms in Sb2Se3 thin-film solar cells. Sol Energy Mater Sol Cells 197:1–6. https://doi.org/10.1016/j.solmat.2019.04.00310.1016/j.solmat.2019.04.003 ↗
51. Wahid MF, Howlader MN, Ahasan N, Rahman MM (2023) Performance improvement of CIGS solar cell: a simulation approach by SCAPS-1D. Energy Power Eng 15:291–30610.4236/epe.2023.158015 ↗
52. Wang Y, Xia Z, Liang J et al (2015) Towards printed perovskite solar cells with cuprous oxide hole transporting layers: a theoretical design. Semicond Sci Technol 30:54004. https://doi.org/10.1088/0268-1242/30/5/05400410.1088/0268-1242/30/5/054004 ↗
53. Xiao Y, Wang H, Kuang H (2020) Numerical simulation and performance optimization of Sb2S3 solar cell with a hole transport layer. Opt Mater 108:110414. https://doi.org/10.1016/j.optmat.2020.11041410.1016/j.optmat.2020.110414 ↗
54. Yadav RK, Pawar PS, Nandi R et al (2022) A qualitative study of SnSe thin film solar cells using SCAPS 1D and comparison with experimental results: a pathway towards 22.69% efficiency. Solar Energy Mater Solar Cells 244:111835. https://doi.org/10.1016/j.solmat.2022.11183510.1016/j.solmat.2022.111835 ↗
55. Yang S, Wu M, Wang B et al (2017) Enhanced electrical and optoelectronic characteristics of few-layer type-II SnSe/MoS2 van der Waals heterojunctions. ACS Appl Mater Interfaces 9:42149–4215510.1021/acsami.7b15288 ↗
56. Zhang Y-N, Li B, Fu L et al (2019) Enhanced optical absorption and efficient cascade electron extraction based on energy band alignment double absorbers perovskite solar cells. Sol Energy Mater Sol Cells 194:168–17610.1016/j.solmat.2019.02.014 ↗