Fabrication and characterization of free-standing polypyrrole/graphene oxide nanocomposite paper
Source abstract
Abstract
Flexible polypyrrole/graphene oxide (GO) nanocomposite paper was prepared via a facile and one-step chemical oxidation polymerization method. The morphology and microstructure of the obtained papers were characterized by SEM, FTIR, and XRD. GO was confirmed experimentally to be exfoliated and uniformly dispersed in the resulting nanocomposites. The specific capacitance value of the nanocomposite paper has been determined to be about 330 F/g at a scan rate of 100 mV/s, suggesting the possible application of the nanocomposite as a supercapacitor electrode. After 700 cycles at a scan rate of 100 mV/s, only 9 % decrease in specific capacitance as compared to initial value indicates the superior electrochemical cyclic stability of the nanocomposite paper.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Conducting polymers and applications · Supercapacitor Materials and Fabrication · Electrochemical sensors and biosensors
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (44)
Show source-provided references
1. Alkan S, Cutler CA, Reynolds JR (2003) High quality electrochromic polythiophenes via BF3Et2O electropolymerization. Adv Funct Mater 13:331–336. doi: 10.1002/adfm.20030430710.1002/adfm.200304307 ↗
2. Becerril HA, Mao J, Liu Z, Stoltenberg RM, Bao Z, Chen Y (2008) Evaluation of solution-processed reduced graphene oxide films as transparent conductors. ACS Nano 2:463–470. doi: 10.1021/nn700375n10.1021/nn700375n ↗
3. Bissessur R, Liu PKY, Scully SF (2006) Intercalation of polypyrrole into graphite oxide. Synth Met 156:1023–1027. doi: 10.1016/j.synthmet.2006.06.02410.1016/j.synthmet.2006.06.024 ↗
4. Biswas S, Drzal LT (2010) Multi layered nanoarchitecture of graphene nanosheets and polypyrrole nanowires for high performance supercapacitor electrodes. Chem Mater 22:5667–5671. doi: 10.1021/cm101132g10.1021/cm101132g ↗
5. Bora C, Dolui SK (2012) Fabrication of polypyrrole/graphene oxide nanocomposites by liquid/liquid interfacial polymerization and evaluation of their optical, electrical and electrochemical properties. Polymer 53:923–932. doi: 10.1016/j.polymer.2011.12.05410.1016/j.polymer.2011.12.054 ↗
6. Bose S, Kim NH, Kuila T, Lau K, Lee JH (2011) Electrochemical performance of a graphene-polypyrrole nanocomposite as a supercapacitor electrode. Nanotechnology 22:295202. doi: 10.1088/0957-4484/22/29/29520210.1088/0957-4484/22/29/295202 ↗
7. Cerezo FT, Preston CML, Shanks RA (2007) Structural, mechanical and dielectric properties of poly(ethylene-co-methyl acrylate-co-acrylic acid) graphite oxide nanocomposites. Comp Sci Technol 67:79–91. doi: 10.1016/j.compscitech.2006.03.02710.1016/j.compscitech.2006.03.027 ↗
8. Chen HQ, Muller MB, Gilmore KJ, Wallace GG, Li D (2008) Mechanically strong, electrically conductive, and biocompatible graphene paper. Adv Mater 20:3557–3561. doi: 10.1002/adma.20080075710.1002/adma.200800757 ↗
9. Compton OC, Dikin DA, Putz KW, Brinson LC, Nguyen ST (2010) Electrically conductive alkylated graphene paper via chemical reduction of amine-functionalized graphene oxide paper. Adv Mater 22:892–896. doi: 10.1002/adma.20090206910.1002/adma.200902069 ↗
10. Dikin DA, Stankovich S, Zimney EJ, Piner RD, Dommett GHB, Evmenenko G, Nguyen ST, Ruoff RS (2007) Preparation and characterization of graphene oxide paper. Nature 448:457–460. doi: 10.1038/nature0601610.1038/nature06016 ↗
11. Gangopadhyay R, Molla MR (2011) Polypyrrole-polyvinyl alcohol stable nanodispersion: a prospective conducting black ink. J Polym Sci B Polym Phys 49:792–800. doi: 10.1002/polb.2221610.1002/polb.22216 ↗
12. Gu ZM, Li CZ, Wang GC, Zhang L, Li XH, Wang WD, Jin S (2010) Synthesis and characterization of polypyrrole/graphite oxide composite by in situ emulsion polymerization. J Polym Sci B Polym Phys 48:1329–1335. doi: 10.1002/polb.2203110.1002/polb.22031 ↗
13. Gupta V, Miura N (2005) Polyaniline/single-wall carbon nanotube composites for high performance supercapacitors. Electrochim Acta 52:1721–1726. doi: 10.1016/j.electacta.2006.01.07410.1016/j.electacta.2006.01.074 ↗
14. Han YQ, Lu Y (2009) Characterization and electrical properties of conductive polymer/colloidal graphite oxide nanocomposites. Comp Sci Technol 69:1231–1237. doi: 10.1016/j.compscitech.2009.02.02810.1016/j.compscitech.2009.02.028 ↗
15. Huang JX, Virji S, Weiller BH, Kaner RB (2003) Polyaniline nanofibers: facile synthesis and chemical sensors. J Am Chem Soc 125:314–315. doi: 10.1021/ja028371y10.1021/ja028371y ↗
16. Hummers WS, Offeman RE (1958) Preparation of graphitic oxide. J Am Chem Soc 80:1339. doi: 10.1021/ja01539a01710.1021/ja01539a017 ↗
17. Jiao S, Tu J, Fan CY, Hou JG, Fray DJ (2011) Electrochemically assembling of a porous nano-polyaniline network in a reverse micelle and its application in a supercapacitor. J Mater Chem 21:9027–9030. doi: 10.1039/c1jm11064k10.1039/c1jm11064k ↗
18. Kim JU, Jeong IS, Moon SI, Gu HB (2001) Electrochemical characteristics of LiMn2O4-polypyrrole composite cathode for lithium polymer batteries. J Power Sources 97:450–453. doi: 10.1016/S0378-7753(01)00743-110.1016/S0378-7753(01)00743-1 ↗
19. Li D, Muller MB, Gilje S, Kaner RB, Wallace GG (2008) Processable aqueous dispersions of graphene nanosheets. Nature Nanotechnol 3:101–105. doi: 10.1038/nnano.2007.45110.1038/nnano.2007.451 ↗
20. Liu P, Gong K, Xiao P, Xiao M (2000) Preparation and characterization of poly(vinyl acetate)-intercalated graphite oxide nanocomposite. J Mater Chem 10:933–935. doi: 10.1039/a908179h10.1039/a908179h ↗
21. Liu AR, Zhao L, Bai H, Zhao HX, Xing XH, Shi GQ (2009) Polypyrrole actuator with a bioadhesive surface for accumulating bacteria from physiological media. ACS Appl Mater Interfaces 1:951–955. doi: 10.1021/am900038710.1021/am9000387 ↗
22. Liu AR, Li C, Bai H, Shi GQ (2010) Electrochemical deposition of polypyrrole/sulfonated graphene composite films. J Phys Chem C 114:22783–22789. doi: 10.1021/jp108826e10.1021/jp108826e ↗
23. Lomeda JR, Doyle CD, Kosynkin DV, Hwang W, Tour JM (2008) Diazonium functionalization of surfactant-wrapped chemically converted graphene sheets. J Am Chem Soc 130:16201–16206. doi: 10.1021/ja806499w10.1021/ja806499w ↗
24. Mirmohseni A, Oladegaragoze A (2000) Anti-corrosion properties of polyaniline coating on iron. Synth Met 114:105–108. doi: 10.1016/S0379-6779(99)00298-210.1016/S0379-6779(99)00298-2 ↗
25. Pitkethly MJ (2004) Nanomaterials: the driving force. Nano Today 7:20–29. doi: 10.1016/S1369-7021(04)00627-3
26. Ramanathan T, Abdala AA, Stankovich S, Dikin DA, Herrera-Alonso M, Piner RD, Adamson DH, Schniepp HC, Chen X, Ruoff RS, Nguyen ST, Aksay IA, Prudhomme RK, Brinson LC (2008) Functionalized graphene sheets for polymer nanocomposites. Nat Nanotechnol 3:327–331. doi: 10.1038/nnano.2008.9610.1038/nnano.2008.96 ↗
27. Robinson JT, Perkins FK, Snow ES, Wei ZQ, Sheehan PE (2008) Reduced graphene oxide molecular sensors. Nano Lett 8:3137–3140. doi: 10.1021/nl801300710.1021/nl8013007 ↗
28. Rubinson J, Kayinamura YP (2009) Charge transport in conducting polymers: insights from impedance spectroscopy. Chem Soc Rev 38:3339–3347. doi: 10.1039/b904083h10.1039/b904083h ↗
29. Sirivisoot S, Pareta R, Webster TJ (2011) Electrically controlled drug release from nanostructured polypyrrole coated on titanium. Nanotechnology 22:085101. doi: 10.1088/0957-4484/22/8/08510110.1088/0957-4484/22/8/085101 ↗
30. Stankovich S, Piner RD, Chen X, Wu N, Nguyen ST, Ruoff RS (2006) Stable aqueous dispersions of graphitic nanoplatelets via the reduction of exfoliated graphite oxide in the presence of poly(sodium 4-styrenesulfonate). J Mater Chem 16:155–158. doi: 10.1039/b512799h10.1039/B512799H ↗
31. Szabo T, Berkesi O, Dekany I (2005) Drift study of deuterium-exchanged graphite oxide. Carbon 43:3186–3189. doi: 10.1016/j.carbon.2005.07.01310.1016/j.carbon.2005.07.013 ↗
32. Titelman GI, Gelman V, Bron S, Khalfin RL, Cohen Y, Bianco-Peled H (2005) Characteristics and microstructure of aqueous colloidal dispersions of graphite oxide. Carbon 43:641–649. doi: 10.1016/j.carbon.2004.10.03510.1016/j.carbon.2004.10.035 ↗
33. Wang GC, Yang ZY, Li XW, Li CZ (2005) Synthesis of poly(aniline-co-o-anisidine)-intercalated graphite oxide composite by delamination/reassembling method. Carbon 43:2564–2570. doi: 10.1016/j.carbon.2005.05.00810.1016/j.carbon.2005.05.008 ↗
34. Wang DW, Li F, Zhao JP, Ren WC, Chen ZG, Tan J, Wu ZS, Gentle I, Lu GQ, Cheng HM (2009a) Fabrication of graphene/polyaniline composite paper via in situ anodic electropolymerization for high-performance flexible electrode. ACS Nano 3:1745–1752. doi: 10.1021/nn900297m10.1021/nn900297m ↗
35. Wang J, Sun L, Mpoukouvalas K, Lienkamp K, Lieberwirth I, Fassbender B, Bonaccurso E, Brunklaus G, Muehlebach A, Beierlein T, Tilch R, Butt HJ, Wegner G (2009b) Construction of redispersible polypyrrole core–shell nanoparticles for application in polymer electronics. Adv Mater 21:1137–1141. doi: 10.1002/adma.20080278710.1002/adma.200802787 ↗
36. Whitby RLD, Korobeinyk A, Mikhalovsky SV, Fukuda T, Maekawa T (2011) Morphological effects of single-layer graphene oxide in the formation of covalently bonded polypyrrole composites using intermediate diisocyanate chemistry. J Nanopart Res 13:4829–4837. doi: 10.1007/s11051-011-0459-z10.1007/s11051-011-0459-z ↗
37. Xu YX, Bai H, Lu GW, Li C, Shi GQ (2008) Flexible graphene films via the filtration of water-soluble noncovalent functionalized graphene sheets. J Am Chem Soc 130:5856–5867. doi: 10.1021/ja800745y10.1021/ja800745y ↗
38. Yalcinkaya S, Demetgul C, Timur M, Colak N (2010) Electrochemical synthesis and characterization of polypyrrole/chitosan composite on platinum electrode its electrochemical and thermal behaviors. Carbohydr Polym 79:908–913. doi: 10.1016/j.carbpol.2009.10.02210.1016/j.carbpol.2009.10.022 ↗
39. Yan J, Wei T, Fan Z, Qian W, Zhang M, Shen X, Wei F (2010a) Preparation of graphene nanosheet/carbon nanotube/polyaniline composite as electrode material for supercapacitors. J Power Sources 195:3041–3045. doi: 10.1016/j.jpowsour.2009.11.02810.1016/j.jpowsour.2009.11.028 ↗
40. Yan XB, Chen JT, Yang J, Xue QJ, Miele P (2010b) Fabrication of free-standing, electrochemically active, and biocompatible graphene oxide–polyaniline and graphene–polyaniline hybrid papers. ACS Appl Mater Interfaces 2:2521–2529. doi: 10.1021/am100293r10.1021/am100293r ↗
41. Yang XM, Li L, Zhao Y (2010) Ag/AgCl-decorated polypyrrole nanotubes and their sensory properties. Synth Met 160:1822–1825. doi: 10.1016/j.synthmet.2010.06.01810.1016/j.synthmet.2010.06.018 ↗
42. Yang SD, Shen CM, Liang Y, Tong H, He W, Shi XZ, Zhang X, Gao HJ (2011) Graphene nanosheets-polypyrrole hybrid material as a highly active catalyst support for formic acid electro-oxidation. Nanoscale 3:3277–3284. doi: 10.1039/c1nr10371g10.1039/c1nr10371g ↗
43. Zhang WJ, Xiao HM, Zhu LP, Fu SY, Wan MX (2010) Facile one-step synthesis of electromagnetic functionalized polypyrrole/Fe3O4 nanotubes via a self-assembly process. J Polym Sci A Polym Chem 48:320–326. doi: 10.1002/pola.2378710.1002/pola.23787 ↗
44. Zhang D, Zhang X, Chen Y, Yu P, Wang C, Ma Y (2011) Enhanced capacitance and rate capability of graphene/polypyrrole composite as electrode material for supercapacitors. J Power Sources 196:5990–5996. doi: 10.1016/j.jpowsour.2011.02.09010.1016/j.jpowsour.2011.02.090 ↗