Investigation of the polyvinyl alcohol stabilization mechanism and adsorption properties on the surface of ternary mixed nanooxide AST 50 (Al2O3–SiO2–TiO2)
Source abstract
Abstract
A new adsorbent consisting of fumed, mixed alumina, silica, and titania in various proportions (AST 50) was investigated. The studied material was prepared by chemical vapor deposition method. The diameter of AST 50 primary particles was equal to about 51 nm which denotes that it can be classified as a nanomaterial. In the presented paper, the adsorption properties of polyvinyl alcohol on the ternary oxide were investigated. The polymer macromolecules were characterized by two different molecular weights and degree of hydrolysis. The polymer adsorption reaches the maximum at pH 3 and decreases with the solution pH rise. The reduction of the adsorbed PVA macromolecules is related to the electrostatic repulsion forces occurring in the studied system. The AST 50 point of zero charge (pH pzc ) obtained from the potentiometric titration is equal to 4.7. Due to the nonionic character of the analyzed macromolecular compound, the polymer attendance has an insignificant effect on the AST 50 surface charge density. In the case of the adsorbent particles zeta potential, the obtained dependencies are different in the absence and presence of PVA. The shift of the slipping plane and displacement of the counter-ions from Stern layer by the adsorbed polymer chains have the greatest effect on the ζ potential value. The stability measurements indicate that the AST 50 suspensions in the presence of the background electrolyte at pH 3 and 6 are unstable. In turn, in an alkaline medium the mixed oxide suspensions exhibit the highest durability, which is a result of a large number of the negative charges on the AST 50 surface. The addition of PVA 100 significantly improves the suspension stability at pH 3 and 6; at higher pH value, the polymer presence does not influence the system durability. It is related to the steric and electrosteric stabilization of the colloidal particles by the adsorbed polyvinyl alcohol macromolecules.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Electrophoretic Deposition in Materials Science · Analytical Chemistry and Sensors · Polymer Nanocomposites and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (18)
Show source-provided references
1. Amjad Z (2002) Water soluble polymers solution properties and applications. Kluwer Academic Publishers, New York10.1007/b114563 ↗
2. Briscoe B, Luckham P, Zhu S (2000) The effects of hydrogen bonding upon the viscosity of aqueous poly(vinyl alcohol) solutions. Polymer 41:3851–386010.1016/S0032-3861(99)00550-9 ↗
3. Cai W, Gupta RB (2002) Hydrogels. In: Kirk-Othmer (ed) Encyclopedia of chemical technology. Wiley, New York, pp 729–75910.1002/0471238961.0825041807211620.a01 ↗
4. Chibowski S, Paszkiewicz M, Krupa M (2000) Investigation of the influence of the polyvinyl alcohol adsorption on the electrical properties of Al2O3—solution interface, thickness of the adsorption layers of PVA. Powder Technol 107:251–25510.1016/S0032-5910(99)00194-1 ↗
5. Farrokhpay S (2009) A review of polymeric dispersant stabilisation of titania pigment. Adv Colloid Interface 151:24–3210.1016/j.cis.2009.07.004 ↗
6. Grządka E (2011) Influence of surfactants on the structure of the adsorption layer in the system: carboxymethylcellulose/alumina. Mater Chem Phys 126:488–49310.1016/j.matchemphys.2011.01.047 ↗
7. Gun’ko VM, Zarko VI, Mironyuk IF et al (2004) Surface electric and titration behaviour of fumed oxides. Colloids Surf A 240:9–2510.1016/j.colsurfa.2004.03.014 ↗
8. Gun’ko VM, Yurchenko GR, Turov VV et al (2010) Adsorption of polar and nonpolar compounds onto complex nanooxides with silica, alumina and titania. J Colloid Interface Sci 348:546–55810.1016/j.jcis.2010.04.062 ↗
9. Janusz W, Kobal I, Sworska A, Szczypa J (1997) Investigation of the electrical double layer in a metal oxide/monovalent electrolyte solution system. J Colloid Interface Sci 187:381–38710.1006/jcis.1996.4690 ↗
10. Kosmulski M (2009) Surface charging and points of zero charge. Surfactant science series vol. 145. CRC Press, Boca Raton10.1201/9781420051896 ↗
11. Liufu S, Xiao H, Li Y (2005) Adsorption of poly(acrylic acid) onto the surface of titanium dioxide and the colloidal stability of aqueous suspension. J Colloid Interface Sci 281:155–16310.1016/j.jcis.2004.08.075 ↗
12. Mauer KH (2004) Detergent proteases. Curr Opin Biotech 15:330–33410.1016/j.copbio.2004.06.005 ↗
13. Moody G (1992) The use of polyacrylamides in mineral processing. Min Eng 5:479–49210.1016/0892-6875(92)90227-Z ↗
14. Semenov AN (2008) Theory of colloid stabilization in semidilute polymer solutions. Macromolecules 41:2243–224910.1021/ma702536c ↗
15. Snabre P, Mills P (1994) Settling of a suspension of hard spheres. Europhys Lett 25:651–65610.1209/0295-5075/25/9/003 ↗
16. Vincent B (1974) The effect of adsorbed polymers on dispersion stability. Adv Colloid Interface 4:193–27710.1016/0001-8686(74)85002-5 ↗
17. Wiśniewska M (2011) A review of temperature influence on adsorption mechanism and conformation of water soluble polymers on the solid surface. J Dispers Sci Technol 32:1605–162310.1080/01932691.2010.528332 ↗
18. Wiśniewska M, Chibowski S, Urban T (2012) Effect of the type of polymer functional groups on the structure of its film formed on the alumina surface—suspension stability. React Funct Polym 72:791–79810.1016/j.reactfunctpolym.2012.08.005 ↗