journal article·2017-02Open access

Reliable nanomaterial classification of powders using the volume-specific surface area method

Wendel Wohlleben, Johannes Mielke, Alvise Bianchin, Antoine Ghanem, Harald Freiberger, Hubert Rauscher, Marion Gemeinert, Vasile-Dan Hodoroaba

Journal of Nanoparticle Research· Volume 19· Issue 2

Abstract

The volume-specific surface area (VSSA) of a particulate material is one of two apparently very different metrics recommended by the European Commission for a definition of "nanomaterial" for regulatory purposes: specifically, the VSSA metric may classify nanomaterials and non-nanomaterials differently than the median size in number metrics, depending on the chemical composition, size, polydispersity, shape, porosity, and aggregation of the particles in the powder. Here we evaluate the extent of agreement between classification by electron microscopy (EM) and classification by VSSA on a large set of diverse particulate substances that represent all the anticipated challenges except mixtures of different substances. EM and VSSA are determined in multiple labs to assess also the level of reproducibility. Based on the results obtained on highly characterized benchmark materials from the NanoDefine EU FP7 project, we derive a tiered screening strategy for the purpose of implementing the definition of nanomaterials. We finally apply the screening strategy to further industrial materials, which were classified correctly and left only borderline cases for EM. On platelet-shaped nanomaterials, VSSA is essential to prevent false-negative classification by EM. On porous materials, approaches involving extended adsorption isotherms prevent false positive classification by VSSA. We find no false negatives by VSSA, neither in Tier 1 nor in Tier 2, despite real-world industrial polydispersity and diverse composition, shape, and coatings. The VSSA screening strategy is recommended for inclusion in a technical guidance for the implementation of the definition. Graphical abstractWe evaluate the extent of agreement between classification by electron microscopy (EM) and classification by Volume-Specific Surface Area (VSSA) on a large set of diverse particulate substances. These represent the challenges anticipated for identification of nanomaterials by the European Commission recommendation for a definition of nanomaterials for regulatory purposes.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Electrostatics and Colloid Interactions · nanoparticles nucleation surface interactions · Electron and X-Ray Spectroscopy Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (28)

Show source-provided references
1. Ayral A, El Mansouri A, Vieira MP, Pilon C (1998) Porosity of sol–gel derived silica coatings on glass substrates. J Mater Sci Lett 17(11):883–88510.1023/A:1026428814961 ↗
2. Babick F, Mielke J, Wohlleben W, Weigel S, Hodoroaba V-D (2016) How reliably can a material be classified as a nanomaterial? Available particle-sizing techniques at work. J Nanopart Res 18:15810.1007/s11051-016-3461-7 ↗
3. Babick F, Richter A (2006) Sound attenuation by small spheroidal particles due to visco-inertial coupling. The Journal of the Acoustical Society of America 119(3):1441–144810.1121/1.2168427 ↗
4. Brunauer S, Emmett PH, Teller E (1938) Adsorption of gases in multimolecular layers. J Am Chem Soc 60(2):309–31910.1021/ja01269a023 ↗
5. Dabrowski A (2001) Adsorption–from theory to practice. Adv Colloid Interf Sci 93(1–3):135–22410.1016/S0001-8686(00)00082-8 ↗
6. DIN 66137–2 (2004) Bestimmung der Dichte fester Stoffe – Teil 2: Gaspyknometrie
7. European Commission (2011), Commission recommendation of 18 October 2011 on the definition of nanomaterial (2011/696/EU); 2011. Off J Eur Union
8. Galarneau A, Villemot F, Rodriguez J, Fajula F, Coasne B (2014) Validity of the t-plot method to assess microporosity in hierarchical micro/mesoporous materials. Langmuir 30(44):13266–1327410.1021/la5026679 ↗
9. Gibson N, Rauscher H, & Roebben G (2016) Comments on the article by a. J. Lecloux (J Nanopart Res (2015) 17:447) regarding the use of volume-specific surface area (vssa) to classify nanomaterials. J Nanopart Res 18(8):1–810.1007/s11051-016-3507-x ↗
10. Hackley VA, Stefaniak AB (2013) “Real-world” precision, bias, and between-laboratory variation for surface area measurement of a titanium dioxide nanomaterial in powder form. J Nanopart Res 15(6)10.1007/s11051-013-1742-y ↗
11. Iler RK (1979) The chemistry of silica: solubility, polymerization, colloid and surface properties and biochemistry of. Wiley, Silica
12. ISO 15901–3 (2007) Evaluation of pore size distribution and porosimetry of solid materials by mercury porosimetry and gas adsorption–part 3: analysis of micropores by gas adsorption
13. ISO 9277 (2010) Determination of the specific surface area of solids by gas adsorption–BET method
14. Kreyling, WG, Semmler-Behnke, M & Chaudhry, Q (2010) A complementary definition of nanomaterial. Nano Today 5:165–16810.1016/j.nantod.2010.03.004 ↗
15. Lecloux AJ (1981) Texture of catalysts. In: Anderson JR, Boudart M, editors. Catalysis–science and technology. vol. 2. Springer, Berlin, p. 171–23010.1007/978-3-642-93171-0_4 ↗
16. Lecloux AJ, Bronckart J, Noville F, Dodet C, Marchot P, Pirard JP (1986) Study of the texture of monodisperse silica sphere samples in the nanometer size range. Colloids and Surfaces 19:359–37410.1016/0166-6622(86)80345-6 ↗
17. Lecloux AJ (2015) Discussion about the use of the volume-specific surface area (VSSA) as criteria to identify nanomaterials according to the EU definition. J Nanopart Res 17(11)10.1007/s11051-015-3239-3 ↗
18. Lippens BC, de Boer JH (1965) Studies on pore systems in catalysts: V. The t method Journal of Catalysis 4(3):319–32310.1016/0021-9517(65)90307-6 ↗
19. Pena JBV, Kund K, Hempelmann U, Wohlleben W, Koch T, Burke A et al (2014) Basic comparison of particle size distribution measurements of pigments and fillers using commonly available industrial methods. Publications Office of the European Union
20. Radlinski AP, Mastalerz M, Hinde AL, Hainbuchner M, Rauch H, Baron M et al (2004) Application of SAXS and SANS in evaluation of porosity, pore size distribution and surface area of coal. Int J Coal Geol 59(3–4):245–27110.1016/j.coal.2004.03.002 ↗
21. Rauscher H, Roebben G, Sanfeliu AB, Emons H, Gibson N, Koeber R, et al. (2015) Towards a review of the EC recommendation for a definition of the term “nanomaterial”: part 3: scientific-technical evaluation of options to clarify the definition and to facilitate its implementation. Eur Commission JRC report 95675. http://publications.jrc.ec.europa.eu/repository/handle/JRC95675 . Accessed 06.02.2017
22. Roebben G, Rauscher H, Amenta V, Aschberger K, Sanfeliu AB, Calzolai L, et al. (2014) Towards a review of the EC Recommendation for a definition of the term “nanomaterial”–part 2: assessment of collected information concerning the experience with the defintion. Eur Commission JRC report 91377. http://publications.jrc.ec.europa.eu/repository/handle/JRC91377 . Accessed 06.02.2017
23. SCENIHR [Scientific Committee on Emerging and Newly Identified Health Risks] (2010) Scientific Basis for the Definition of the Term “Nanomaterial”, European Commission, DG Health & Consumers, Brussels, available at: http://ec.europa.eu/health/scientific_committees/emerging/docs/scenihr_o_030.pdf . Accessed 06.02.2017
24. Schneider P (1995) Adsorption isotherms of microporous-mesoporous solids revisited. Appl Catal A Gen 129(2):157–16510.1016/0926-860X(95)00110-7 ↗
25. Stark WJ, Stoessel PR, Wohlleben W, Hafner A (2015) Industrial applications of nanoparticles. Chem Soc Rev 44:5793–580510.1039/C4CS00362D ↗
26. Temmerman PJD, Verleysen E, Lammertyn J, Mast J (2014) Semi-automatic size measurement of primary particles in aggregated nanomaterials by transmission electron microscopy. Powder Technol 261:191–20010.1016/j.powtec.2014.04.040 ↗
27. US Patent 3,928,057 (1975): TiO2 pigment coated with porous alumina/silica and dense silica
28. Van Doren E, De Temmerman PJ, Francisco M, Mast J (2011) Determination of the volume-specific surface area by using transmission electron tomography for characterization and definition of nanomaterials. Journal of Nanobiotechnology 9(1):1710.1186/1477-3155-9-17 ↗