Effect of Particle Size on the Photocatalytic Activity of Nanoparticulate Zinc Oxide
Source abstract
Abstract
In this study, a three-stage process consisting of mechanical milling, heat treatment, and washing has been used to manufacture nanoparticulate ZnO powders with a controlled particle size and minimal agglomeration. By varying the temperature of the post-milling heat treatment, it was possible to control the average particle size over the range of 28–57 nm. The photocatalytic activity of these powders was characterized by measuring the hydroxyl radical concentration as a function of irradiation time using the spin-trapping technique with electron paramagnetic resonance spectroscopy. It was found that there exists an optimum particle size of approximately 33 nm for which the photocatalytic activity is maximized. The existence of this optimal particle size is attributable to an increase in the charge carrier recombination rate, which counteracts the increased activity arising from the higher specific surface area for a sufficiently small particle size.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: ZnO doping and properties · Quantum Dots Synthesis And Properties · Copper-based nanomaterials and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (16)
Show source-provided references
1. Almquist C.B. and Biswas P. (2002). Role of synthesis method and particle size of nanostructured TiO2 on its photoactivity. J. Catal. 212: 14510.1006/jcat.2002.3783 ↗
2. Cullity B., 1978. Elements of X-Ray Diffraction. 2nd edn. Addison-Wesley, Reading
3. Dodd A.C. and McCormick P.G. (2001). Solid state chemical synthesis of nanoparticulate zirconia. Acta Mater. 49: 421510.1016/S1359-6454(01)00311-1 ↗
4. Dodd A.C. and McCormick P.G. (2003). Factors Affecting the particle size of powders synthesised by mechanochemical processing. J. Metast. Nanocryst. Mater. 15–16: 545
5. Grela M.A., Coronel M.E.J. and Colussi A.J. (1996). Quantitative spin-trapping studies of weakly illuminated titanium dioxide sols. implications of the mechanism of photocatalysis. J. Phys. Chem. 100: 1694010.1021/jp953562r ↗
6. Hoffmann M., Martin S., Choi W. and Bahnemann D. (1995). Environmental applications of semiconductor photocatalysis. Chem. Revs. 95: 69–9510.1021/cr00033a004 ↗
7. Innes B., Tsuzuki T., Dawkins H., Dunlop J., Trotter G., Nearn M. and McCormick P. (2002). Nanotechnology and the cosmetic chemist. NutraCos. 1: 7–12
8. Jaeger C.D. and Bard A.J. (1979). Spin trapping and electron spin resonance detection of radical intermediates in the photodecomposition of water at TiO2 particulate systems. J. Phys. Chem. 83: 314610.1021/j100487a017 ↗
9. Janzen E.G. (1971). Spin trapping. Acc. Chem. Res. 4: 31–4010.1021/ar50037a005 ↗
10. Kerker M. (1969). The scattering of light. Academic Press, New York
11. McCormick P.G., Tsuzuki T., Robinson J. and Ding J. (2001). Nanopowders synthesized by mechanochemical processing. Adv. Mat. 13: 100810.1002/1521-4095(200107)13:12/13<1008::AID-ADMA1008>3.0.CO;2-Q ↗
12. Pearton S., Norton D., Ipa K., Heo Y. and Steiner T. (2003). Recent progress in processing and properties of ZnO. Superlattices Microstruct. 34: 3–3210.1016/S0749-6036(03)00093-4 ↗
13. Tsuzuki T. and McCormick P.G. (2001). Synthesis of ultrafine ceria powders by mechanochemical processing. J. Am. Ceram. Soc. 84: 145310.1111/j.1151-2916.2001.tb00859.x ↗
14. Tsuzuki T. and McCormick P.G. (1997). Synthesis of CdS quantum dots by mechanochemical reaction. Appl. Phys. A. 65: 60710.1007/s003390050629 ↗
15. Wang C.-C., Zhang Z. and Ying J. (1997). Photocatalytic decomposition of halogenated organics over nanocrystalline titania. Nanostruct. Mat. 9: 58310.1016/S0965-9773(97)00130-X ↗
16. Zhang Z., Wang C.-C., Zakaria R. and Ying J.Y. (1998). Role of particle size in nanocrystalline TiO2-based photocatalysts. J. Phys. Chem. B. 102: 1087110.1021/jp982948+ ↗