journal article·2026-07Open access

Lattice symmetrization and band convergence advance high thermoelectric performance in diamond-like Cu3SbSe4 compounds

Zi-Yuan Wang, Hao Yin, Chong-Yu Wang, Yi-Xin Zhang, Ju Rong, Jing Feng, Zhen-Hua Ge

Journal of Materiomics· Volume 12· Issue 4

Abstract

Cu 3 SbSe 4 compounds with a diamond-like structure are promising eco-friendly p -type thermoelectric materials. However, their thermoelectric performance is limited by low intrinsic carrier concentration and mobility. This study employed GeMnTe 2 doping to simultaneously regulate the electronic band structure and carrier transport properties of Cu 3 SbSe 4 . First-principles calculations show that Mn ions introduce a resonant state (3d orbital) and promote band convergence, enhancing the density-of-states effective mass near the Fermi level. Concurrently, GeMnTe 2 doping induced the lattice relaxation effect and promoted the transformation of the matrix structure to a pseudocubic structure with higher symmetry, which reduced the deformation potential and inhibited the decreasing in carrier mobility under heavy doping. Multi-scale defects, including point defects and Ge/MnO x nanoprecipitates, strongly suppressed the lattice thermal conductivity. Therefore, the power factor of 11.5 μW⸱cm −1 ⸱K −2 was reached by the 1.5% (in mole) GeMnTe 2 doped sample, and the peak ZT of ∼1.2 was obtained at 723 K. Meanwhile, the hardness and modulus of the optimized sample were increased by 10%. These findings indicate that the electrical transport properties of Cu 3 SbSe 4 can be synergistically optimized by band engineering and lattice symmetry tuning. This study provides a valuable method for the design of high-performance diamond-like thermoelectric materials.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Advanced Thermoelectric Materials and Devices · Chalcogenide Semiconductor Thin Films · Copper-based nanomaterials and applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (49)

Show source-provided references
1. Complex thermoelectric materials10.1038/nmat2090 ↗
2. Grid-plainification enables medium-temperature PbSe thermoelectrics to cool better than Bi2Te310.1126/science.adk9589 ↗
3. Cooling, heating, generating power, and recovering waste heat with thermoelectric systems10.1126/science.1158899 ↗
4. Ternary compound CuInTe2: a promising thermoelectric material with diamond-like structure10.1039/c2cc30318c ↗
5. High thermoelectric performance through crystal symmetry enhancement in triply doped diamondoid compound Cu2SnSe310.1002/aenm.202100661 ↗
6. Recent progress on diamondoid Cu2SnSe3 thermoelectric materials: a review10.1007/s40195-024-01798-7 ↗
7. Achieving high thermoelectric performance through carrier concentration optimization and energy filtering in Cu3SbSe4-based materials10.1016/j.jmat.2022.04.007 ↗
8. Review of current ZT > 1 thermoelectric sulfides10.1016/j.jmat.2023.05.011 ↗
9. Reinforcing bond covalency for high thermoelectric performance in Cu3SbSe4-based thermoelectric material10.1007/s40843-023-2498-y ↗
10. Unconventional doping effect leads to ultrahigh average thermoelectric power factor in Cu3SbSe4-based composites
11. High thermoelectric performance and compatibility in Cu3SbSe4-CuAlS2 composites: a substitute for PbTe10.1039/D3EE00128H ↗
12. Synergistic modulation of power factor and thermal conductivity in Cu3SbSe4 towards high thermoelectric performance10.1016/j.nanoen.2020.104658 ↗
13. Low-cost and environmentally benign selenides as promising thermoelectric materials10.1016/j.jmat.2018.07.001 ↗
14. Enhanced thermoelectric properties of Cu3SbSe4-based materials by synergistic modulation of carrier concentration and phonon scattering10.1016/j.jmat.2023.06.005 ↗
15. High thermoelectric performance of Cu3SbSe4 obtained by synergistic modulation of power factor and thermal conductivity10.1021/acsaem.2c03006 ↗
16. Doping effects on the thermoelectric properties of Cu3SbSe410.1166/sam.2011.1189 ↗
17. Thermoelectric properties of Sn-doped p-type Cu3SbSe4: a compound with large effective mass and small band gap10.1039/C4TA01957A ↗
18. Enhanced thermoelectric performance of Sn-doped Cu3SbS410.1039/C8TC02481B ↗
19. Enhancement of thermoelectric performance by Ag/Bi/Fe co-doping into Cu3SbSe4 ceramics for green thermoelectric applications10.1016/j.ceramint.2024.08.465 ↗
20. Effects of bismuth doping on the thermoelectric properties of Cu3SbSe4 at moderate temperatures10.1016/j.jallcom.2013.01.131 ↗
21. Enhanced thermoelectric performance of β-Zn4Sb3 based nanocomposites through combined effects of density of states resonance and carrier energy filtering
22. Band engineering for realizing large effective mass in Cu3SbSe4 by Sn/La codoping10.1021/acs.jpcc.0c01465 ↗
23. Band engineering through Pb-doping of nanocrystal building blocks to enhance thermoelectric performance in Cu3SbSe410.1002/smtd.202301377 ↗
24. High thermoelectric performance realized through manipulating layered phonon-electron decoupling10.1126/science.abn8997 ↗
25. Realizing high in-plane carrier mobility in n-type SnSe crystals through deformation potential modification10.1039/D3EE01047C ↗
26. Discordant distortion in cubic GeMnTe2 and high thermoelectric properties of GeMnTe2-x%SbTe10.1021/jacs.2c12877 ↗
27. High-performance electron-doped GeMnTe2: hierarchical structure and low thermal conductivity10.1039/C9TA09972G ↗
28. Characterization of lorenz number with seebeck coefficient measurement10.1063/1.4908244 ↗
29. Efficiency of ab-initio total energy calculations for metals and semiconductors using a plane-wave basis set10.1016/0927-0256(96)00008-0 ↗
30. Projector augmented-wave method10.1103/PhysRevB.50.17953 ↗
31. Generalized gradient approximation made simple10.1103/PhysRevLett.77.3865 ↗
32. Highly effective solid solution towards high thermoelectric and mechanical properties in Cu3SbSe4–Cu2GeSe3 bulk materials via quasi-homogenization doping10.1021/acs.inorgchem.4c03226 ↗
33. Enhancing the effective mass and covalent bond strength of Cu3SbSe4-based thermoelectric materials by Mn/Sn co-doping
34. Raised solubility in SnTe by GeMnTe2 alloying enables converged valence bands, low thermal conductivity, and high thermoelectric performance10.1016/j.nanoen.2022.106940 ↗
35. Realizing high thermoelectric performance in copper sulfide via intermediate doping10.1007/s40843-025-3423-6 ↗
36. Optimal performance of Cu1.8S1−xTex thermoelectric materials fabricated via high-pressure process at room temperature10.1007/s40145-020-0385-6 ↗
37. Highly enhanced thermoelectric and mechanical performance of copper sulfides via natural mineral in-situ phase separation10.26599/JAC.2024.9220885 ↗
38. Low effective mass leading to high thermoelectric performance10.1039/c2ee21536e ↗
39. High thermoelectric properties realized in earth-abundant Bi2S3 bulk via carrier modulation and multi-nano-precipitates synergy10.1016/j.nanoen.2020.105227 ↗
40. General design of high-performance and textured layered thermoelectric materials via stacking of mechanically exfoliated crystals10.1016/j.joule.2024.05.006 ↗
41. Ternary Ag2Se1–xTx : a near-room-temperature thermoelectric material with a potentially high figure of merit10.1021/acs.inorgchem.1c01563 ↗
42. Contrasting roles of trivalent dopants M (M = In, Sb, Bi) in enhancing the thermoelectric performance of Ge0.94M0.06Te10.1016/j.actamat.2023.118926 ↗
43. Enhanced thermoelectric properties of Cu3SbSe4 compounds by isovalent bismuth doping
44. Improvement of thermoelectric properties of Cu3SbSe4 compound by in doping10.1016/j.matdes.2016.03.001 ↗
45. Simultaneous optimization of the overall thermoelectric properties of Cu3SbSe4 by band engineering and phonon blocking10.1016/j.jallcom.2017.06.347 ↗
46. Mn-alloying induced thermoelectric performance enhancement in GeTe through synergistic band engineering and lattice modulation
47. Synergistic effect of tri-doping with Mn, Ge, and Bi and thermoelectric enhancement of SnTe induced by grain boundary engineering and nanostructuring10.1016/j.jmat.2025.101119 ↗
48. One stone three birds: natural mineral enhancing thermoelectric properties in Cu2Se-based composites
49. Enhanced thermoelectric properties of Cu3SbSe4 via compositing with nano-SnTe10.1016/j.jallcom.2021.160358 ↗