journal article·2026-07Open access

Self-generated reactor strategy enabling combustion synthesis of ultra-long AlN whiskers for superior thermal management

Lei Zhao, Yinuo Ma, Zhilei Wei, Luyun Tan, Zhitong Li, Zhenxia Yuan, Zhongqi Shi

Journal of Materiomics· Volume 12· Issue 4

Abstract

Conventional aluminum nitride (AlN) whisker synthesis faces inherent limitations, including high reaction temperature, prolonged processing time, high cost and restricted whisker length. Herein, we proposed a novel self-generated reactor strategy that enables the efficient combustion synthesis of ultra-long AlN whiskers. This strategy was realized in the Al/NH 4 Cl/PTFE system, where an eggshell-like reactor formed in - situ , establishing a thermodynamically stable and confined environment. This unique architecture was crucial for the controlled growth of uniform and high-aspect-ratio whiskers. Under optimized conditions (7% (in mass) NH 4 Cl and PTFE/Al molar ratio of 0.015), AlN whiskers with an average diameter of 0.52 μm and a length exceeding 1 mm (aspect ratio >1900) were successfully obtained. Based on thermal reactivity and thermo-kinetic analyses, a possible mechanism for the formation of the self-generated reactor and the subsequent growth of ultra-long AlN whiskers within it was proposed. Furthermore, the synthesized whiskers were incorporated into nanofibrillated cellulose to fabricate composite films, which demonstrated a high in-plane thermal conductivity of 13.16 W⋅m −1 ·K −1 . This work not only provides a novel and efficient pathway for AlN whiskers synthesis but also highlights their potential for practical thermal management applications.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: GaN-based semiconductor devices and materials · Energetic Materials and Combustion · Advanced ceramic materials synthesis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (58)

Show source-provided references
1. The alignment of AlN platelets in polymer matrix and its anisotropic thermal properties10.1016/j.jmat.2019.04.011 ↗
2. Electrical properties, microstructure, and thermal conductivity of hot-pressed CaO-doped AlN ceramics10.1016/j.ceramint.2024.01.326 ↗
3. Production of a grain boundary phase as conducting pathway in insulating AlN ceramics10.1016/j.actamat.2007.07.025 ↗
4. Low sintering shrinkage porous ceramics: principles, progress, and perspectives10.26599/JAC.2024.9221015 ↗
5. Unique composite architecture of phosphor-in-glass film coated on different heat-conducting substrates for high-brightness laser lighting
6. Thermal properties of AlN polycrystals obtained by pulse plasma sintering method10.1007/s40145-013-0059-8 ↗
7. Toughening of silicon nitride ceramics through stress-induced phase transformation10.26599/JAC.2025.9221125 ↗
8. HPMA modified aluminium nitride powder for aqueous tape casting of AlN ceramic substrates10.26599/JAC.2023.9220780 ↗
9. Highly thermally conductive ceramic-coated separators with aluminum nitride for mitigating thermal runaway in lithium-ion batteries10.1016/j.cej.2025.162732 ↗
10. Combustion synthesis of rod-like AlN nanoparticles10.2109/jcersj2.116.975 ↗
11. Synthesis of AlN porous-shell hollow spheres by a combustion route10.1016/j.ceramint.2012.10.235 ↗
12. Elevating mechanical and biotribological properties of carbon fiber composites by constructing graphene-silicon nitride nanowires interlocking interfacial enhancement10.1016/j.jmat.2023.11.009 ↗
13. Synthesis of nearly spherical AlN particles by an in-situ nitriding combustion route10.1007/s40145-020-0440-3 ↗
14. Temperature-dependent deformation in silver-particle-covered copper nanowires by molecular dynamics simulation10.1016/j.jmat.2021.05.005 ↗
15. Crystallography-derived Young's modulus and tensile strength of AlN nanowires as revealed by in situ transmission electron microscopy10.1021/acs.nanolett.9b00263 ↗
16. Controllable synthesis of alumina nanofibers with tunable crystal phases via a facile and cost-effective dealloying process10.26599/JAC.2025.9221080 ↗
17. Effective thermal conductivity of dispersed materials10.1007/BF00997630 ↗
18. Boosting the in-plane thermal conductivity of nanofibrillated cellulose films: alignment engineering of cross-linked AlN whiskers10.1039/D3TA04770A ↗
19. Structural optimization and mechanical property enhancement of MgSiN2 ceramics: strategy of interface strengthening
20. Synthesis of AlN whiskers using cobalt oxide catalyst and their alignments for the improvement of thermal conductivity10.1016/j.matchemphys.2016.05.030 ↗
21. A novel ternary nitride whisker: mgSiN2 whisker and its growth mechanism10.1111/jace.20480 ↗
22. Formation of aluminium nitride whiskers by direct nitridation10.1016/j.jeurceramsoc.2005.06.033 ↗
23. Vapor−solid growth and characterization of aluminum nitride nanocones10.1021/ja045682v ↗
24. High-aspect-ratio single-crystalline AlN nanowires: free-catalytic PVT growth and field-emission studies10.1016/j.jallcom.2019.04.250 ↗
25. Carbothermal synthesis of high-aspect-ratio AlN whiskers using graphite felt as carbon source10.1016/j.ceramint.2021.12.186 ↗
26. Morphology of AlN whiskers grown by reacting N2 gas and Al vapor10.1016/j.jcrysgro.2016.11.127 ↗
27. Synthesis and growth mechanism of aluminum nitride nanowires via a chloride-assisted chemical vapor reaction method10.1016/j.ceramint.2018.11.136 ↗
28. Preparation of SiC coated graphite composite powders by nitriding combustion synthesis10.26599/JAC.2023.9220798 ↗
29. Morphologies and growth mechanisms of aluminum nitride whiskers by SHS method—Part I10.1023/A:1004780213488 ↗
30. Morphologies and growth mechanisms of aluminum nitride whiskers by SHS method—Part 210.1023/A:1004732314397 ↗
31. Combustion synthesis of AlN nanowhiskers with different metallic catalysts10.1016/j.matlet.2014.04.147 ↗
32. Significantly enhancing thermal conductivity of flexible composite films through horizontally aligned and interconnected SiC nanowires10.1021/acsaelm.4c01176 ↗
33. Ultra-fast synthesis and thermodynamic analysis of MoAlB by self-propagating high-temperature combustion synthesis10.26599/JAC.2023.9220680 ↗
34. Growth of quasi-aligned AlN nanofibers by nitriding combustion synthesis10.1111/j.1551-2916.2007.01747.x ↗
35. Combustion synthesis of AlN whiskers10.1007/s10853-006-2939-6 ↗
36. Formation and evolution of quasi-aligned AlN nanowhiskers by combustion synthesis10.1016/j.jallcom.2008.08.057 ↗
37. Efficient synthesis route to quasi-aligned and high-aspect-ratio aluminum nitride micro- and nanostructures10.1016/j.cej.2011.09.047 ↗
38. Morphology-controlled synthesis of quasi-aligned AlN nanowhiskers by combustion method: effect of NH4Cl additive10.1016/j.ceramint.2009.03.013 ↗
39. Facile preparation of poly(3,4-ethylenedioxythiophene): poly(styrenesulfonate)/Ag2Te nanorod composite films for flexible thermoelectric generator10.1016/j.jmat.2020.10.011 ↗
40. In-situ synthesis of AlON reinforcing phases in resin bonded Al2O3 composite materials10.1016/j.jallcom.2017.03.211 ↗
41. Fabrication of β-Si3N4 nano-fibers10.1016/S0925-8388(01)01383-4 ↗
42. Ultraviolet emission from high-quality crystalline ultra-long AlN whiskers10.1017/S0885715613000687 ↗
43. Activated self-propagating high-temperature synthesis of aluminum and titanium nitrides10.1016/j.expthermflusci.2006.04.015 ↗
44. Synthesis of ultra-long aluminum nitride nanowires with excellent photoluminescent property by aluminum chloride assisted chemical vapor reaction technique10.1016/j.ceramint.2019.03.165 ↗
45. The effects of NH4Cl addition and particle size of Al powder in AlN whiskers synthesis by direct nitridation10.1016/j.ijrmhm.2014.06.011 ↗
46. Effect of additives on self-propagating high-temperature synthesis of AlN10.1016/S0955-2219(00)00313-7 ↗
47. PTFE, an effective additive on the combustion synthesis of silicon nitride10.1016/j.jeurceramsoc.2007.06.008 ↗
48. Mechanistic understanding of the participation effect of carbon in the combustion of PTFE/n-Al: combining experimental verification with reactive molecular dynamics simulation10.1016/j.fuel.2023.128572 ↗
49. Confined flame propagation of Al/PTFE mechanically activated composites10.1016/j.combustflame.2018.08.024 ↗
50. Effect of Al particle size on the thermal degradation of Al/Teflon mixtures10.1080/00102200601182333 ↗
51. Examining hydroxyl–alumina bonding toward aluminum nanoparticle reactivity10.1021/acs.jpcc.5b08408 ↗
52. Study on calibrating the quadrupole mass spectrometers with gas mixture10.1016/j.measurement.2020.108099 ↗
53. Knudsen diffusion differs from fickian diffusion
54. An effective way to enhance energy output and combustion characteristics of Al/PTFE10.1016/j.combustflame.2020.01.008 ↗
55. Heterogeneous nucleation or homogeneous nucleation?10.1063/1.481644 ↗
56. Dual bio-inspired design of highly thermally conductive and superhydrophobic nanocellulose composite films10.1021/acsami.0c01425 ↗
57. Strong reinforcement effects in 2D cellulose nanofibril–graphene oxide (CNF–GO) nanocomposites due to GO-induced CNF ordering10.1039/D0TA04406G ↗
58. Enhanced thermal management performance of nanofibrillated cellulose composite with highly thermally conductive boron phosphide10.1039/D1TA06597A ↗