High piezoelectric voltage constant in artificial periodic porous piezoceramics by digital light processing

Porous piezoceramics exhibit enhanced voltage output response, demonstrating significant potential for applications in piezoelectric sensors. In this study, four types of PZT-based porous ceramics with triply periodic minimal surface structures were fabricated using digital light processing (DLP). By controlling the powder morphology and debinding process, composite porous ceramics with coexisting periodic macropores and random micropores, as well as simple porous ceramics with only periodic macropores, were prepared. The results reveal that random pores more effectively reduce the permittivity, however, the increased coercive field and reduced breakdown strength lead to a significant deterioration in the piezoelectric coefficient ( d 33 ). In contrast, simple porous ceramics, featuring dense ceramic phases, exhibit higher breakdown strength and lower coercive field, enabling more effective poling. Notably, the Gyroid structure achieves a high d 33 of 585 pC/N, comparable to bulk ceramics, while the relative permittivity is significantly reduced to 706. Consequently, an outstanding piezoelectric voltage constant ( g 33 ) of 93.3 mV·m·N –1 and a high piezoelectric energy harvesting figure of merit of 54.6 × 10 –12 m 2 /N are achieved, far surpassing conventional random porous ceramics. These findings highlight that DLP technology and the development of artificial periodic porous ceramics provide a promising pathway for the design of high-performance piezoelectric devices.