Thermoelectric properties of In-substituted Ge-based clathrates prepared by HPHT
Source abstract
Abstract
Bulk materials Ba8Ga16InxGe30-x (x = 0.5, 1.0, 1.5) were prepared by High-Pressure and High-Temperature (HPHT) method and the crystal structure has been confirmed by X-ray diffraction and cell refinement. The actual In composition was much lower than the starting composition, and lattice constants increased with the increase of substitution. As the temperature increased, the Seebeck coefficient and electrical resistivity increased first and then decreased, while the thermal conductivity was the opposite, which leads to significant enhancement on thermoelectric properties of the clathrates. The substitution of indium elements decreased the seebeck coefficient and electrical resistivity, and also changed the microstructure of the compounds. A minimum thermal conductivity of 0.84 Wm−1K−1 was obtained, and a good ZT value of 0.52 was achieved. The grain boundaries and lattice defects generated by high pressure can effectively scatter phonons of different frequencies, which reduce the lattice thermal conductivity.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Advanced Thermoelectric Materials and Devices · Thermal properties of materials · Thermal Radiation and Cooling Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (33)
Show source-provided references
1. Cooling, heating, generating power, and recovering waste heat with thermoelectric systems10.1126/science.1158899 ↗
2. Semiconductor clathrates: a phonon glass electron crystal material with potential for thermoelectric applications10.1016/S0080-8784(01)80152-6 ↗
3. Better thermoelectrics through glass-like crystals10.1038/nmat4461 ↗
4. Complex thermoelectric materials10.1038/nmat2090 ↗
5. High temperature thermoelectric transport properties of double-atom-filled clathrate compounds YbxBa8−xGa16Ge3010.1063/1.2951888 ↗
6. Effect of In additions on the thermoelectric properties of the type-I clathrate compound Ba8Ga16Ge3010.1063/1.2743815 ↗
7. Structure and thermoelectric properties of the n-type clathrate Ba8Cu5.1Ge40.2Sn0.710.1039/C5TA04168F ↗
8. Host structure engineering in thermoelectric clathrates10.1021/cm071435p ↗
9. Thermoelectric properties and structural instability of type-I clathrate Ba8Ga16Sn30 at high temperatures10.1016/j.ssc.2012.06.027 ↗
10. Electronic structure and thermoelectric properties of Si-Based clathrate compounds10.1007/s11664-009-0730-6 ↗
11. Growth and thermoelectric properties of Ba8Ga16Ge30 clathrate crystals10.1016/j.jallcom.2009.04.072 ↗
12. Large thermoelectric figure of merit at high temperature in Czochralski-grown clathrate Ba8Ga16Ge3010.1063/1.2163979 ↗
13. Influence of PCA on thermoelectric properties and hardness of nanostructured Ba–Cu–Si clathrates10.1016/j.matdes.2015.08.096 ↗
14. Clathrate thermoelectrics10.1016/j.mser.2016.08.001 ↗
15. A new method of synthesis for thermoelectric materials: HPHT10.1016/S0038-1098(02)00182-5 ↗
16. Effect of HPHT processing on the structure, and thermoelectric properties of Co4Sb12 co-doped with Te and Sn10.1039/C4TA05477F ↗
17. Thermoelectric transport properties and crystal growth of BiSbTe3 bulk materials produced by a unique high pressure synthesis10.1039/c3ce40780b ↗
18. Effect of high pressure on thermoelectric performance and electronic structure of SnSe via HPHT10.1016/j.jallcom.2016.01.158 ↗
19. Effect of high-temperature and high-pressure processing on the structure and thermoelectric properties of clathrate Ba8Ga16Ge3010.1021/acs.jpcc.6b02678 ↗
20. Phase stability and chemical composition dependence of the thermoelectric properties of the type-I clathrate Ba8AlxSi46−x (8≤x≤15)10.1016/j.jssc.2011.03.038 ↗
21. Crystal structures, Raman spectroscopy, and magnetic properties of Ba7.5Al13Si29 and Eu0.27Ba7.22Al13Si2910.1021/ic050483d ↗
22. Crystallographic, thermoelectric, and mechanical properties of polycrystalline Ba8AlxSi46−x clathrates10.1007/s11664-012-2418-6 ↗
23. Effect of europium substitution on thermoelectric properties of noble-metal silicon clathrates with Ba8-xEuxCuySi46-y nominal compositions10.2320/matertrans.E-M2012816 ↗
24. Suppressing adverse intrinsic conduction of Bi2Te3 thermoelectric bulks by Sb and Cu co-substitutions via HPHT synthesis
25. Optimization of the thermoelectric properties of Ba8Ga16Ge3010.1063/1.2939438 ↗
26. Thermoelectric properties of p-type clathrate Ba8.0Ga15.9ZnySn30.1 single crystals with various carrier concentrations10.1021/acs.chemmater.5b00025 ↗
27. Influence of hot pressing temperature on thermoelectric properties of type-I clathrates10.1002/pssa.201300195 ↗
28. Structure and properties of Ba8Ga16Ge30 clathrates by a novel synthesis method using CO gas reductive atmosphere10.1016/j.jallcom.2004.08.059 ↗
29. Pacheco · Phys Status Solidi A · 2006 · 213 · 77410.1002/pssa.201532767 ↗
30. Preparation of nanocrystalline Ba-Cu-Si clathrate powders by mechanical milling using a process control agent
31. Stronger phonon scattering by larger differences in atomic mass and size in p-type half-Heuslers Hf1−xTixCoSb0.8Sn0.210.1039/c2ee21554c ↗
32. Evolution of thermoelectric properties and anisotropic features of Bi2Te3 prepared by high pressure and high temperature10.1016/j.jallcom.2015.01.271 ↗
33. Thermoelectric property studies on Cu-Doped n-type CuxBi2Te2.7Se0.3 nanocomposites10.1002/aenm.201100149 ↗